Top Sellers
Diamond Pad Eye 3-1/4" from SUNCOR
Diamond Pad Eyes. Heavy-Duty, one-piece precision casting.
|
3/8" Bow/Stern Eye - 1.03" ID Between Studs x 4.63" Thread Length from SUNCOR
Bow / Stern Eye 304 Stainless Steel - Formed . Each U-Bolt set includes four nuts (two standard and two beveled) . Includes one bow plate, and one stern plate. . Threads are "UNC". . Stock size: 3/8" . ID between studs: 1. 03" . Thread length: 2. 50" .
|
|
|
|
|
|
|
2-3/4"L Small Swivel Bail Shackle, 5/8" Snap, 7/16" Bail, 2645lb. MWL from WICHARD
Highest quality drop-forged 17-4 PH stainless-steel shackles are beautifully polished, with smooth contours. Great strength and reliability.
|
Terror Eyes Bird Repeller from BIRD-X
Designed using scientific research, the hanging ball constantly moves and features menacing eyes on the front and the back which follow birds and scare them away.
|
OSCO CRUSADER ELBOW FOR LOWER SWIVEL from OSCO MOTORS CORP.
Exhaust Elbow Lower Swivel - 3" Outlet Replaces Crusader #97387 .
|
Scare Eye Balloon from BIRD B GONE
Inflatable Vinyl Scare Eye Balloon with Mylar Tape Tail Visual Scare Device. Confuses Birds with Lifelike Reflective Predator Eyes and Markings. Ideal for use on Fruit Trees, Patio Covers, Pool Areas, Gazebos, Boats, Etc.
|
|
|
1-7/8" Brass Standard Hasp from ABI
Highly polished brass . Fixed eye (does not swivel). 1"w x 1-7/8"L. Padlock hole diameter 5/16" .
|
5"L T20 Snap Shackle, 31/32" Opening, 31/32" Bail, 10,000lb. MWL from TYLASKA
S. -made shackles offer race-ready high performance, one-handed operation and they can be snapped open under load. Large bail size ideal for additional sheets, spinnakers and other multi-line applications. They have a breaking strength of 5,000 lbs and weigh just 2. 2 ounces in the standard bail configuration. Ideal for J-24s, Mumm 30s and similar boats. Tylaska T8 Snap Shackles are perfect for applications requiring high strength and low weight. 5 ounces in the standard bail configuration.
|
Large Fixed Bail Snap Shackle from WICHARD
All our snap shackles are hot drop forged from high resistance stainless steel. Only forging creates a superior steel product, by increasing its elasticity and maximizing the steel's internal strength. A forged snap shackle will deform long before breaking; it will not burst or break suddenly.
|
Inflatable Boat Ladder from GARELICK
Contoured to hug the hull of inflatable boats. Attaches to floorboard or side with 3/8'' line and heavy-duty swivel snap. 1'' dia. anodized aluminum tubing with plastic rungs. Vinyl sleeves protect hull fabric.
|
3/16" Stock Dia. U-Bolt, 1-3/8” Thread Length, 1-3/16" Hole Spacing, 1" Eye Dia. from SEAFIT
Stainless steel U-Bolts have metric threads. The top plate is held in place by small ears that are forged into the U-bolt. Includes matching backing plate. ShWt .
|
|
Swivel-Eye Snap, Swivel Eye Snap - 3, Swivel Eye Ftg
|
|
Home -> Anchor & Docking -> Chain & Mooring->Stainless Swivel Anchor Connectors
18-8 stainless swivel connectors prevent snagging at the anchor/chain connection, slide easily over anchor rollers and prevent the chain from becoming twisted while the anchor is set. Attach with a single set screw (using the Allen wrench included).
Part No: 644-12
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Stainless Swivel Anchor Connectors
18-8 stainless swivel connectors prevent snagging at the anchor/chain connection, slide easily over anchor rollers and prevent the chain from becoming twisted while the anchor is set. Attach with a single set screw (using the Allen wrench included).
Part No: 644-08
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Stainless Swivel Anchor Connectors
18-8 stainless swivel connectors prevent snagging at the anchor/chain connection, slide easily over anchor rollers and prevent the chain from becoming twisted while the anchor is set. Attach with a single set screw (using the Allen wrench included).
Part No: 644.10
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Bronze Baby Snaps
Bronze baby snaps come with fixed eye or swivel eye. Eye ID: 3/8".
Part No: 317.10
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Carabiners & Snaphooks->Bronze Baby Snaps
Bronze baby snaps come with fixed eye or swivel eye. Eye ID: 3/8".
Part No: S-1131P
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Cam Bases
Swivels ride on two rows of ball bearings for smooth, effortless pivoting even under high loads. Use #144 and #205 for mainsheets on dinghies and small offshore boats. #144 has a tall arm for use with bigger blocks. The low-profile 205 is used at the deck level and when smaller blocks are used.
Part No: 144
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Bulls Eye Fairlead/Cleat on Swivel Base
Low-profile bulls eye, swivel base, and cleat in one. Aluminum arm swivels through 360°, and supports a high performance T-Cleat with Fast Track fairlead. Bulls eye has stainless liner for long life.
Part No: RF58
|
|
|
|
Home -> Electronics -> VHF Radios & Communications -> VHF Accessories->West Marine 150/250 VHF Replacement Parts
West Marine 150/250 VHF Replacement Accessories.
Part No: CLIP250
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Car Controls
For use on offshore boats from 32’–65’. Torlon® bearings and pivoting shackles for non-vertical loads.
Part No: 659
|
|
|
|
Home -> Engine Systems -> Engine Lubrication
Fits standard grease gun extension tubes. Easy access to difficult fittings.
Part No: 18-9791
|
|
|
|
**Swivel Eye Ftg,1/4 In. Cab. |**Swivel Eye Ftg,1/4 In.
Part No: SE01405
|
|
|
|
**Swivel Eye Ftg,3/8 In. Cab. |**Swivel Eye Ftg,3/8 In.
Part No: SE03820
|
|
|
|
**Swivel Eye Ftg,7/16 In. Cab. |**Swivel Eye Ftg,7/16 In.
Part No: SE71620
|
|
|
|
Stainless steel. 4479630 - 5/8" dia. - 100 lbs WLL. 4479648 - 3/4" dia.
Part No: C0174-0002
|
|
|
|
Home -> Fishing -> Fishing Accessories
.
Part No: 269
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses
Swiveling base holds your choice of scrubbers or cover.
Part No: 1700
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses->Lambswool Cover
Handy swivel pad rotates to the angle you needThe Swivel Pad Combo includes swivel pad base and features the Shur-Lok Adapter and one Synthetic Lamb’s Wool Cover. Replacement covers also available. Synthetic lamb's wool pad won't scratch gelcoat.
Part No: 1710C
|
|
|
|
Home -> Seating & Covers -> Seating->Evolution Series Seat Slide System
null.
Part No: 99036:01
|
|
|
|
Home -> Sailboat -> Blocks->Series 40 Orbit Block™ Accessories
Accessories to Ronstan Series 40 Orbit blocks.
Part No: RF4
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Deck Lights->Stainless-Steel Spreader Lights
55W sealed beam lamps. Draw: 4.
Part No: 00803-WB
|
|
|
|
Home -> Sailboat -> Tiller & Rudder
For boats up to 22', the Swivel Stick is an economical fixed-length tiller extension. Features a removable Speed Lock rubber universal end fitting. . 5/8" dia. black anodized aluminum tubing with a rubber ball-style handle. . Made in U. S. A. . Mfr.
Part No: 102002
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swivel-Eye Boat Snaps
*Model 116103 has a unique opening method (see photo).
Part No: M1174-0002
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swivel-Eye Boat Snaps
*Model 116103 has a unique opening method (see photo).
Part No: M1174-0003
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swivel-Eye Boat Snaps
*Model 116103 has a unique opening method (see photo).
Part No: S-1104P
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swivel-Eye Boat Snaps
*Model 116103 has a unique opening method (see photo).
Part No: M1174-0001
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swivel-Eye Boat Snaps
*Model 116103 has a unique opening method (see photo).
Part No: S-1128P
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swivel-Eye Boat Snaps
*Model 116103 has a unique opening method (see photo).
Part No: 310-02-N
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swivel-Eye Boat Snaps
*Model 116103 has a unique opening method (see photo).
Part No: 310-01-N
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
The EquipLite Swiveling Low-Cost Connectors boast a weight savings of approximately 70%–80% over traditional stainless shackles. ). High-strength material—low friction, impact-resistant The swivel quick connectors use high-strength Hardkote–anodized high-tensile aluminum body with high-load polymer bearing technology for easy rotation. Reduced damage to the rig—safe and will not jam if overloaded The compact swivel quick connector with Velcro wrap protection reduces damage to the rig.
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swiveling Connectors
Swiveling Connectors designed and intended for halyard connections Will reduce weight aloft for halyards. Dynex loops are 80% lighter than traditional stainless shackles, but can take the same loads. Use high-load Polymer swivels for easy rotation, and do not jam.
Part No: 10-5S
|
|
|