Top Sellers
Side-Mount with Trim & Tilt 4-Wire from TELEFLEX
SL-3 is specifically engineered for installation without control modifications. Port or starboard installation with various cable-entry angles. Adapts for push or pull mode without tools. “Easy-On” cable design means no shift or throttle adjustments. Optional trim switch in handle grip for one-hand operation. Functions: Gearshift/throttle . Levers: Dual functions—each lever controls throttle and shift . Lever Material: Metal . Features: Push button for neutral Adjustable brake .
|
Twin Straight Handle Control, Chrome from TELEFLEX
Stylish low profile flush mount design available in several function and style options. For single or dual station applications with single or twin engines. Single function (each lever controls shift or throttle). Suits 33C type cables.
|
Aluminum Transom Support Master Mounting Kit from TELEFLEX
Universal mount for most outboard engine steering applications. This kit includes the Teleflex Outboard Clamp Block, Support Tube, and the Clevis Kit.
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
Repl. Cylinder - Repl. Hynautic Model K2 from TELEFLEX
Hydraulic Cylinders -- the same quality steering components that comprise the many Hynautic systems may also be ordered independently for both new or retrofit applications.
|
Water Temperature Gauge, IB, SD from TELEFLEX
Light grey dial, black graduations and numerals, white pointer staff. Scratch-resistant curved glass lenses with black, near flush bezels. U. S. and metric scales with ISO symbols where appropriate.
|
|
|
Speedometer Kit 80mph, 20-80mph, Includes pitot, 20' tubing, Dia, 3.78", Mounting Hole Max/Min, 3.41"/3.44", D 2.7" from TELEFLEX
White dial, black numerals, black pointer with fire-orange tip. Scratch-resistant curved glass lenses with polished stainless steel, near flush bezels. U. S. and metric scales with ISO symbols .
|
SeaStar Helm Seal Kit from TELEFLEX
Replacement shaft seal kit HS5176 fits various post-1990 SeaStar 1. 4, 1. 7 (I), 2. 0, 2. 4 (II), SeaStar Pro and SeaStar helms.
|
BayStar Helm Seal Kits from TELEFLEX
Replacement front seal kits for both front and rear mount helms. HS5147 fits BayStar front mount and SportTilt helms . Contains 3 screws, shaft seal and o-ring seal.
|
Tach Diesel Mag. P.U. 4000 rpm from TELEFLEX
A popular choice for gas and diesel inboard engines, White Premier instruments feature white dials with modern black and blue graphics and superior light pipe illumination. When illuminated, black dial grads and pointer become red. Fog-resistant design for enhanced readability.
|
|
|
33C Red Jacket Cable, 18' from TELEFLEX
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
|
Big-T Rotary Helm from TELEFLEX
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
|
SeaStar Filler Kit from TELEFLEX
SeaStar hydraulic steering systems require the use of a special high-quality hydraulic fluid meeting MIL SPEC H-5606 C.
|
|
each from TELEFLEX, 12mm from EQUIPLITE, 14mm from EQUIPLITE
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swiveling Connectors
Swiveling Connectors designed and intended for halyard connections Will reduce weight aloft for halyards. Dynex loops are 80% lighter than traditional stainless shackles, but can take the same loads. Use high-load Polymer swivels for easy rotation, and do not jam.
Part No: 12-6S
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swiveling Connectors
Swiveling Connectors designed and intended for halyard connections Will reduce weight aloft for halyards. Dynex loops are 80% lighter than traditional stainless shackles, but can take the same loads. Use high-load Polymer swivels for easy rotation, and do not jam.
Part No: 14-8S
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swiveling Connectors
Swiveling Connectors designed and intended for halyard connections Will reduce weight aloft for halyards. Dynex loops are 80% lighter than traditional stainless shackles, but can take the same loads. Use high-load Polymer swivels for easy rotation, and do not jam.
Part No: 6-3S
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swiveling Connectors
Swiveling Connectors designed and intended for halyard connections Will reduce weight aloft for halyards. Dynex loops are 80% lighter than traditional stainless shackles, but can take the same loads. Use high-load Polymer swivels for easy rotation, and do not jam.
Part No: 8-4S
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Stanchion Mounted Bullseye Fairleads
Mount without drilling on stanchion or base from 7/8" to1" diameter. Deluxe model has a stainless steel-bushed bulls-eye to minimize friction. Easily installs with clamp. No need to drill holes.
Part No: 40-503
|
|
|
|
Home -> Electrical -> Interior Lighting
A rotating shield directs light where you need it. Chrome-plated zinc. Includes 7W bulb. 2-5/8" diameter, cutout 7/8" diameter.
Part No: 1254DP0CHR
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories -> Towers And Accessories
Style, strength and quality. this 6061-T6 aircraft-grade aluminum tower is so tough, it’s used by ski boat builders Ski Centurion, MB and Supreme on their tournament boats. Easily collapses without tools using HEIM joints and turn-knob design. 360° unobstructed visibility for driver and passengers.
Part No: SW2000
|
|
|
|
Home -> Cordage -> Rigging Products
Corrosion free, these lightweight titanium brackets are designed for connecting Terminators to mastheads and chainplates for applications like backstays. Holes are 1/2-inch and can be drilled to 5/8 if needed. 10,000lb. safe working load. Weight: 4oz.
Part No: CSS52
|
|
|
|
Home -> Engine Systems -> Control Systems->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0617-10
|
|
|
|
|
Home -> Engine Systems -> Control Systems->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0617-15
|
|
|
|
|
Home -> Engine Systems -> Control Systems->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0617-20
|
|
|
|
|
Home -> Engine Systems -> Control Systems->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0617-25
|
|
|
|
|
Home -> Engine Systems -> Control Systems->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0617-30
|
|
|
|
|
Home -> Engine Systems -> Control Systems->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0617-05
|
|
|
|
|
Home -> Engine Systems -> Control Systems->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0605-01
|
|
|
|
|
Home -> Engine Systems -> Control Systems->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0605-02
|
|
|
|
|
Home -> Engine Systems -> Control Systems->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NJ0524-00
|
|
|
|
Home -> Fishing -> Rod & Reel Combinations
Get ready to fish for cats, stripers, bass and troutStyle: Spincasting; Target Species: Catfish, Striper, Bass, Panfish, Trout and other small to medium size gamefish. These Synergy series spincasting combos come in a variety of inexpensive rod/reel combinations great for the novice angler, or more seasoned experts looking for a spare without spending a lot of money.
Part No: SYNSW14CBO
|
|
|
|
Home -> Fishing -> Rod & Reel Combinations -> Lt Spinning Combos
Get ready to fish for cats, stripers, bass and troutStyle: Spincasting; Target Species: Catfish, Striper, Bass, Panfish, Trout and other small to medium size gamefish. These Synergy series spincasting combos come in a variety of inexpensive rod/reel combinations great for the novice angler, or more seasoned experts looking for a spare without spending a lot of money.
Part No: SYNSTEEL10CBO
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains -> Drive Train Parts
Improves shaft packing performanceThis PTFE-based additive prolongs the life of shaft packing, which allows water to be sealed out more completely.
Part No: 10150
|
|
|
|
Home -> Engine Systems -> Engine Lubrication -> 4 Stroke Oil->Synthetic Blend 4-Cycle Engine Oil
Recommended for gasoline and diesel-powered stern-drive and inboard engines that require FC-W Certified, SAE 25W-40 oil.
Part No: 858056Q01
|
|
|
|
|
Home -> Engine Systems -> Engine Lubrication->Synthetic Blend 4-Cycle Engine Oil
Recommended for gasoline and diesel-powered stern-drive and inboard engines that require FC-W Certified, SAE 25W-40 oil.
Part No: 858055Q01
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses->Mop Heads
Need a mop? Here are four from which you may select!People, like mops, aren't all alike—so here are four different mops, one of which is bound to suit your individual mopping style and needs! Traditionalists prefer the poodle-style cotton shag, while modernists tend towards synthetic-strips. They are expressly designed for use with Shurhold poles and are part of Shurhold's "One Pole Does it All" system. The Cotton (poodle-style) String Mop is an all-purpose mop.
Part No: 113
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Furling Accessories
Tall rigs may require an additional extrusion for headstay lengths greater than our standard lengths. Kit includes one full length extrusion, one torque joint for connection of extrusions, bearing liners, and rivets. 6' Long. 3lb. 10oz.
Part No: 1100-10
|
|
|
|
Home -> Engine Systems -> Steering Systems->SeaStar Inboard Hydraulic Cylinders
Replacement cylinders for SeaStar hydraulic two-line inboard steering, boats to 50'.
Part No: HC5318
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Battcar Batten Traveler Systems, System A Components
Add a lazy jack system, and raising or lowering your mainsail becomes a single person operation. Battcar systems also improve sailing performance, because they do not require the sail to be cut flat, or reduce the size of the roach, as with other systems. They make mainsail handling safer, by allowing you to raise or lower the sail with practically no effort at all, even with the sail powered up. At the inboard end of every batten, special ball bearing or slider Battcars move along the track.
Part No: 3802
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Battcar Batten Traveler Systems, System A Components
Add a lazy jack system, and raising or lowering your mainsail becomes a single person operation. Battcar systems also improve sailing performance, because they do not require the sail to be cut flat, or reduce the size of the roach, as with other systems. They make mainsail handling safer, by allowing you to raise or lower the sail with practically no effort at all, even with the sail powered up. At the inboard end of every batten, special ball bearing or slider Battcars move along the track.
Part No: 3803
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Battcar Batten Traveler Systems, System A Components
Add a lazy jack system, and raising or lowering your mainsail becomes a single person operation. Battcar systems also improve sailing performance, because they do not require the sail to be cut flat, or reduce the size of the roach, as with other systems. They make mainsail handling safer, by allowing you to raise or lower the sail with practically no effort at all, even with the sail powered up. At the inboard end of every batten, special ball bearing or slider Battcars move along the track.
Part No: 3829
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Battcar Batten Traveler Systems, System A Components
Add a lazy jack system, and raising or lowering your mainsail becomes a single person operation. Battcar systems also improve sailing performance, because they do not require the sail to be cut flat, or reduce the size of the roach, as with other systems. They make mainsail handling safer, by allowing you to raise or lower the sail with practically no effort at all, even with the sail powered up. At the inboard end of every batten, special ball bearing or slider Battcars move along the track.
Part No: 3811
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Battcar Batten Traveler Systems, System A Components
Add a lazy jack system, and raising or lowering your mainsail becomes a single person operation. Battcar systems also improve sailing performance, because they do not require the sail to be cut flat, or reduce the size of the roach, as with other systems. They make mainsail handling safer, by allowing you to raise or lower the sail with practically no effort at all, even with the sail powered up. At the inboard end of every batten, special ball bearing or slider Battcars move along the track.
Part No: 3812
|
|
|
