Top Sellers
Medium Trapeze Harness, 5'7"–5'10" Wearer Height, 38"–40" Wearer Chest Size from GILL INTERNATIONAL
Worn by many top sailors around the world, the spreader bar on this harness positions the weight over the hips, reducing painful pressure points and increasing comfort during long periods in the harness. Features the RWO “QRH” pushbutton Quick Release Hook for safer trapezing. Includes multiple adjustment points and a padded lumbar support.
|
Aquatech Boots, Black, 7 from GILL
2mm double-lined neoprene boots are idea for dinghy and small boat performance sailing and offer protection and secure footing in demanding conditions. They feature a wraparound, non- marking natural rubber sole for improved grip, flatlocked seams for comfort and an adjustable strap for maximum support. .
|
Deluxe Windshield Washer Kit from AFI
Install your own windshield washer systemFits new or existing AFI Deluxe wiper arm and blade sets, with all the parts to outfit two wiper arms. The kit includes a 3 liter water tank with mounting bracket (8. 5"H x 7"W x 4. 5"D), 12V pump motor and 16' below deck clear tubing, 6' above deck black tubing, clips and sprayer fittings. You supply wiring, an in-line 3A fuse and On-Off momentary switch.
|
Premium 4-Cycle Heavy-Duty SAE 15W40 Engine Oil, Gallon from WEST MARINE
An excellent choice for all 4-cycle inboard diesel and gasoline engines operating in all conditions. Clean-burning formula meets or exceeds both industry and factory performance specifications. Powerful additives allow for dependable engine service.
|
PAR-Max 4 Water-System Pump, 12V from JABSCO
Flow rate: 16. 3 Litres/min (4. 3 gallons/min) Self-priming from dry up to 2. 4m (7. 8ft) Smooth flow. Dry running capability. Soft noise absorbing mounts. Snap-fit port fittings. Corrosion resistant materials. Meets USCG Regulation 183. 410 and ISO 8846 MARINE (ignition protection).
|
Stainless-Steel Compact Electric Horn - Double from AFI
Mini Twin Electric Horn Excellent for use in the marine environment. totally seal sound units have type 304 stainless cover, diaphragm and mounting brackets. Material: 304 stainless cover & horn diaphragm. Loudness dB: 106 dB. Approvals: ABYC for boats up to 20 meters. Dimensions: 3"L x 8"W x 1 3/4"H. Power Requirements: 12V. Draw: 3A @ 12V (max. 6A). Fundamental frequency: 490±20/440±20.
|
12 Volt White Dual Trumpet Mini Air Horn from AFI
White epoxy powder-coated finish over solid brass. Noncorrosive Lexan® diaphragm. 12vDC. . Draws 20 amps max. Includes compressor, air tubing, fittings, and hardware. 5" W x 3-3/4"H x 9-1/2" L.
|
Compact Horn w/ Black Cover 10023 from AFI
Stainless steel diaphragm and mounting bracket . Black polypropylene cover . Dimensions: 4 inches L x 3-3/4 inches W x 2-3/4 inches H . Maximum amp draw: 4 Amps . dB(A) rating: 108 at one meter Fundamental frequency: 350±15 .
|
Drop-In Hidden Horn from AFI
Designed for easy installation, this hidden horn mounts from the outside. Compact in size, but capable of 107db loudness. Comes with both black and white snap-on ASA plastic grilles. A weatherproof fabric liner lets sound through, but keeps water out. Prewired for 12V installation. Material: ABS plastic . Loudness dB: 107dB . Design Standards: Meets ABYC specs for boats up to 12 meters . Dimensions: 2"H x 3-3/8"W x 3-1/4"D . Power Requirements: 12 Volts .
|
Outboard Oil - SAE 10W-40 from WEST MARINE
With a higher number of performance-boosting additives than automotive oil, this synthetic blend meets and exceeds the needs of high-performance outboards. It's special formula protects outboards from friction damage and engine wear. Outstanding viscosity at low temperatures. Greater detergency. Resists engine build up. Exceeds all 4-stroke outboard requirements.
|
Synthetic Blend 4-Cycle Engine Oil, Quart from QUICKSILVER
Recommended for gasoline and diesel-powered stern-drive and inboard engines that require FC-W Certified, SAE 25W-40 oil.
|
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
|
Flush Kit For 2- & 4-Stroke Outboards from MERCURY MARINE
Fits Mercury/Mariner 4 and 5hp 2-stroke outboards and 4, 5 and 6hp 4-stroke outboards.
|
|
|
Diamond Pad Eye 3-1/4" from SUNCOR
Diamond Pad Eyes. Heavy-Duty, one-piece precision casting.
|
|
4" from AFI, L from GILL, M from GILL, 2X from GILL, S from GILL, XL from GILL
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Teak & Starboard->Teak Winch Pads
.
Part No: 60467
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Teak & Starboard->Teak Winch Pads
.
Part No: 60468
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Teak & Starboard->Teak Winch Pads
.
Part No: 60469
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Teak & Starboard->Teak Winch Pads
.
Part No: 60473
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Teak & Starboard->Teak Winch Pads
.
Part No: 60474
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Teak & Starboard->Teak Winch Pads
.
Part No: 60476
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Finish Trim Moldings
Assorted Teak Finish Trim Moldings.
Part No: 60841
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Finish Trim Moldings
Assorted Teak Finish Trim Moldings.
Part No: 60840
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Oils & Sealers->Premium Teak Oil
Penetrates and protects your teakA special blend of linseed and tung oils. Penetrates even moist wood to create an attractive sheen and easy-to-clean protective finish. Reduces mildew build-up. For all interior and exterior hardwoods. 16. 9oz. Penetrates even moist wood. Special blend of linseed and tung oils. Reduces mildew build up. For all interior and exterior hardwoods. 16.
Part No: YMA016/1L
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Hull Gard® Inflatable Vinyl Fenders
Hull Gard Fenders stay put and won't roll out of position! The finest utility fender on the market, and a good choice for light duty in protected waters, Hull Gard features a unique oval design which prevents the fender from rolling out of position. The Hull Gard combines unsurpassed softness and superior strength to provide the maximum protection available from a utility fender.
Part No: 91024
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Hull Gard® Inflatable Vinyl Fenders
Hull Gard Fenders stay put and won't roll out of position! The finest utility fender on the market, and a good choice for light duty in protected waters, Hull Gard features a unique oval design which prevents the fender from rolling out of position. The Hull Gard combines unsurpassed softness and superior strength to provide the maximum protection available from a utility fender.
Part No: 91022
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Hull Gard® Inflatable Vinyl Fenders
Hull Gard Fenders stay put and won't roll out of position! The finest utility fender on the market, and a good choice for light duty in protected waters, Hull Gard features a unique oval design which prevents the fender from rolling out of position. The Hull Gard combines unsurpassed softness and superior strength to provide the maximum protection available from a utility fender.
Part No: 91023
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Hull Gard® Inflatable Vinyl Fenders
Hull Gard Fenders stay put and won't roll out of position! The finest utility fender on the market, and a good choice for light duty in protected waters, Hull Gard features a unique oval design which prevents the fender from rolling out of position. The Hull Gard combines unsurpassed softness and superior strength to provide the maximum protection available from a utility fender.
Part No: 91028
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats->Tear Repair Kit
See-thru patch forms an instant bond for repairing holes and tearsRepair holes and tears instantly on almost any surface with this elastic peel-and-stick, see-thru patch. Unique adhesive forms an extreme bond that stretches and recovers without pulling off. Protects against abrasion, moisture, salt water, UV sunlight and extreme temperatures. Choose from two types: Type A for use on hypalon, canvas, rubber, neoprene, most plastics, nylon, non-oiled leather and metal surfaces. .
Part No: WM-BOX-A-100
|
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats->Tear Repair Kit
See-thru patch forms an instant bond for repairing holes and tearsRepair holes and tears instantly on almost any surface with this elastic peel-and-stick, see-thru patch. Unique adhesive forms an extreme bond that stretches and recovers without pulling off. Protects against abrasion, moisture, salt water, UV sunlight and extreme temperatures. Choose from two types: Type A for use on hypalon, canvas, rubber, neoprene, most plastics, nylon, non-oiled leather and metal surfaces. .
Part No: WM-BOX-B-100
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware->Tea Brewing Tumbler with Infuser Basket
Screw Top Tea Mug, with a stainless steel tea basket. An easy to use lid to seal in the warmth and great for all types of tea. Clear double walled insulation. Portable for travel anywhere. Designed to keep liquids hot or cold. Plastic sip lid with strainer under drip free stainless lid. Brews loose tea in minutes.
Part No: MC-3272TB6
|
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware->Tea Brewing Tumbler with Infuser Basket
Screw Top Tea Mug, with a stainless steel tea basket. An easy to use lid to seal in the warmth and great for all types of tea. Clear double walled insulation. Portable for travel anywhere. Designed to keep liquids hot or cold. Plastic sip lid with strainer under drip free stainless lid. Brews loose tea in minutes.
Part No: MC-3272TC
|
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware->Tea Brewing Tumbler with Infuser Basket
Screw Top Tea Mug, with a stainless steel tea basket. An easy to use lid to seal in the warmth and great for all types of tea. Clear double walled insulation. Portable for travel anywhere. Designed to keep liquids hot or cold. Plastic sip lid with strainer under drip free stainless lid. Brews loose tea in minutes.
Part No: MC-3272TR6
|
|
|
|
Home -> Electrical -> Flashlights & Batteries
You couldn't ask for a better compact flashlight! This light provides the highest power-to-weight ratio of any light in its class. Compare it to C and D cell lights that are 3 or 4 times larger and heavier, you won't find a light that out-shines the TEC 40. Halogen bulb lasts approximately 30 hours before it needs replacing . Twist-activated switch won't accidentally turn and waste batteries .
Part No: T40-OM-NY
|
|
|
|
Home -> Clothing Accessories -> Hats, Watches, & Accessories->Tech Sailing Hat
Look stylish while keeping your head protected during those long periods outdoors in this specially designed, six-panel West Marine boating cap with UPF 50+ protection. Made of 100% quick-drying performance-based polyester, this hat includes mesh crown vents for increased circulation, quick adjustable Velcro® back closure, pre-curved visor, low profiled/unstructured front and a Coolmax® sweatband to wick away moisture. One size fits most.
Part No: WMBCAP1-DKGRY
|
|
|
|
|
Home -> Clothing Accessories -> Hats, Watches, & Accessories->Tech Sailing Hat
Look stylish while keeping your head protected during those long periods outdoors in this specially designed, six-panel West Marine boating cap with UPF 50+ protection. Made of 100% quick-drying performance-based polyester, this hat includes mesh crown vents for increased circulation, quick adjustable Velcro® back closure, pre-curved visor, low profiled/unstructured front and a Coolmax® sweatband to wick away moisture. One size fits most.
Part No: WMBCAP1-KAKI
|
|
|
|
Home -> Casual Apparel -> Shorts
**XXL-Khaki Tech Sail Shorts|**XXL-Khaki Tech Sail Shorts.
Part No: 1642KXXXL
|
|
|
|
|
Home -> Casual Apparel -> Shorts
**L-Khaki Tech Sail Shorts|**L-Khaki Tech Sail Shorts.
Part No: 1642KXL
|
|
|
|
|
Home -> Casual Apparel -> Shorts
**M-Khaki Tech Sail Shorts|**M-Khaki Tech Sail Shorts.
Part No: 1642KXM
|
|
|
|
|
Home -> Casual Apparel -> Shorts
**S-Khaki Tech Sail Shorts|**S-Khaki Tech Sail Shorts.
Part No: 1642KS
|
|
|
|
|
Home -> Casual Apparel -> Shorts
**XL-Khaki Tech Sail Shorts|**XL-Khaki Tech Sail Shorts.
Part No: 1642KXXL
|
|
|
|
|
Home -> Casual Apparel -> Shorts
**XS-Khaki Tech Sail Shorts|**XS-Khaki Tech Sail Shorts.
Part No: 1642KXS
|
|
|
|
Home -> Clothing Accessories -> Hats, Watches, & Accessories
Low profile, close fit stays on your head when the wind kicks up. Fast-wicking, quick-drying performance make it ideal for any water-related activity. Tightly-woven nylon with a water-resistant finish and UPF-50+ sun protection. Elastic Velcro® adjustment. Imported. Silver Gray.
Part No: 136SG
|
|
|
|
Home -> Shoes & Boots -> Sandals & Water Socks -> Socks & Accessories->Technical Trainer Socks
Lightweight and highly breathable socks with Coolmax content to help keep your feet dry Cushioned under heel, ball and toes for comfort and protection from blisters . Low height makes them ideal for use with the Decktech or Gripper Shoe.
Part No: SILVER-L
|
|
|
|
|
Home -> Shoes & Boots -> Sandals & Water Socks -> Socks & Accessories->Technical Trainer Socks
Lightweight and highly breathable socks with Coolmax content to help keep your feet dry Cushioned under heel, ball and toes for comfort and protection from blisters . Low height makes them ideal for use with the Decktech or Gripper Shoe.
Part No: SILVER-M
|
|
|
