Top Sellers
Marine Silicone Sealant, Clear, 10oz. Tube from WEST MARINE
Use wherever a flexible, removable seal is required A specially-formulated marine silicone that won’t sag, shrink or turn yellow. Can be used above and below the waterline wherever a flexible, removable seal is required. Excellent for bedding deck fittings and hardware that you may want to remove at some time. Also good for insulating between dissimilar metals to prevent galvanic corrosion. Formulation: One-part silicone sealant . Bonds to non-oily woods, metal, fiberglass, glass, plastics .
|
Marine Whistle from WEST MARINE
Keep this powerful, rugged and reliable whistle attached to your PFD. Made for the marine environment, from noncorroding, high-impact plastic. No metal parts.
|
G. O'Day 222/Santana 525,Length 47", Height at tip 2 1/4", Width at butt 1 1/2", Width at tip 2" from WEST MARINE
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Cant find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
|
Life Jacket Organizer Bag from WEST MARINE
Keep extra lifejackets contained & easy to find Keep your life jackets readily accessible and protect them from damage while not in use with our bright, sturdy storage bag. We use hook-and-loop closures because zippers in a marine environment tend to freeze-up when least convenient. The fabric is heavy-duty fiber-reinforced vinyl, plainly marked for instant identification in an emergency. Accommodates 4–6 adult life jackets (depending on style).
|
Lube Tube Adapter for Yamaha, Nissan, Tohatsu, Honda (2-50hp) from WEST MARINE
Marine lower unit drain, flush and fill tool. Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefishier lower units. Quick, easy and clean way to change marine lower unit gear lube. For use with all 8- and 10-oz.
|
Marine Structural Filler - Quart from WEST MARINE
Great for fiberglass and sheet metal ding repairsFiberglass filler with long strand reinforcing fibers for fiberglass and sheet metal repairs. Water-resistant. Hardener included. Great for quick and easy ding repair on fibergalss surfboards, sailboards, canoes and runabouts. Formulation: Polyester putty . Recommended Usage: Fiberglass and sheet metal repairs . Color: White.
|
Required Waste/Oil Garbage Placards from WEST MARINE
Get ready for a Coast Guard inspection with required plaquesCoast Guard regulations require these plaques to be displayed on any boat 26' feet and over with an enclosed engine compartment. Adhesive backing. Easy to apply. White text on black background.
|
Halyard Kit, 1/8" Wire Dia., 3/8" Line Dia., 40' Wire Length, 40' Line Length from WEST MARINE RIGGING
Convenient, do-it-yourself kits offer an economical way to replace old halyards We offer these kits for those who want to replace their old halyards or install new low-stretch halyards. Made of the highest quality 7x19 oil-free stainless wire and New England Ropes premium white Sta-Set yacht braid. Comes with a Flemish eye at the rope end, and a thimble and sleeve, but no shackle. Rope Type: Sta-Set Yacht Braid . Shackle: Flemish eye splice, sleeve and thimble, no shackle .
|
Sail Ties, Blue 5FT from WEST MARINE
Sail ties with a clever twistOur premium-quality tubular nylon webbing ties have a clever twist: a sewn loop at one end, with a twist that keeps the eye open so it’s easy to thread even with cold hands. Tie a simple slip knot and you’re done! Color-coded so you can quickly select the size you need.
|
Gel Coat - White, Gallon from WEST MARINE
Ideal for application of several layers, with no sanding between layers required. Use to fill gouges, chips, scrapes and deep scratches in the fiberglass gel coat. Use with PVA Curing Agent (Model 593774) to achieve full cure. Waxed Gel Coat: Superior quality isophthalic finish (non-laminating) gel coat that cures to a hard, resilient and glossy surface. Superior-quality non-laminating finish gel coat cures to a hard, resilient and glossy surface. Use to touch up worn or scratched gel coat.
|
|
|
Engine Winterizing Kit from WEST MARINE
Winterize your outboard or sterndrive with this convenient kitUses your existing flusher and a garden hose to winterize your outboard or sterndrive engine, even while it’s on the trailer. Kit includes a five-gallon jug, hose fittings and instructions for winterizing. You supply five gallons of nontoxic antifreeze for each engine. Complete instructions are included.
|
Cabinet Handle, Stainless Steel Bar 7" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
|
Adaptor Fitting for Suzuki & Honda Lower Units from WEST MARINE
Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefisher lower units Fits standard quart plastic bottles. Flexible hose gets to hard-to-reach fill plugs.
|
Port Runner Folding Bike from WEST MARINE
Reliable portside transport that's super easy to stow! Our exclusive 20" bike is ideal for reliable portside transport. The distance between the dock and the grocery store is not always shortor flatand that's why this bike has a chrome-plated steel derailleur and six big sprockets for climbing inclined streets. Stows small for space economy and features a convenient luggage rack to make errands easier. 28lbs. Gears: Six . Drive Train Components: Shimano RD-TX30 .
|
|
from WEST MARINE, Blue from WEST MARINE, White from WEST MARINE
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents
Specifically formulated for use with West Marine bottom and topside paintsDesigned for surface prep and thinning of West Marine bottom paint and topside paint. Quart. Thins West Marine topside and bottom paints.
Part No: 4111212008
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables
Versatile 12" x 24" table mounts conveniently next to your barbecue to add precious workspace. A 6" Sunbrella Pacific blue wind screen, supported by four stainless-steel upright, protects against wind and spray. Features guard rails and a stainless towel/utensil rack. Table Function: Food Service Material: UV Stabilized High-Density Polyethylene Mount Required: Magma Single Mount (ref.
Part No: T10-306
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fenders->Third Mate Fenders
We created this simple, less expensive fender for those of us (the vast majority) who don't hang our fenders horizontally. We eliminated one eye, and constructed our fender with premium vinyl that is soft, flexible and durable. The construction process yields an extremely uniform wall thickness with ribs to minimize roll. Offers the same protection as higher-priced fenders. A needle valve permits precise pressure regulation.
Part No: 431017
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fenders->Third Mate Fenders
We created this simple, less expensive fender for those of us (the vast majority) who don't hang our fenders horizontally. We eliminated one eye, and constructed our fender with premium vinyl that is soft, flexible and durable. The construction process yields an extremely uniform wall thickness with ribs to minimize roll. Offers the same protection as higher-priced fenders. A needle valve permits precise pressure regulation.
Part No: 31017
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fenders->Third Mate Fenders
We created this simple, less expensive fender for those of us (the vast majority) who don't hang our fenders horizontally. We eliminated one eye, and constructed our fender with premium vinyl that is soft, flexible and durable. The construction process yields an extremely uniform wall thickness with ribs to minimize roll. Offers the same protection as higher-priced fenders. A needle valve permits precise pressure regulation.
Part No: 431018
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fenders->Third Mate Fenders
We created this simple, less expensive fender for those of us (the vast majority) who don't hang our fenders horizontally. We eliminated one eye, and constructed our fender with premium vinyl that is soft, flexible and durable. The construction process yields an extremely uniform wall thickness with ribs to minimize roll. Offers the same protection as higher-priced fenders. A needle valve permits precise pressure regulation.
Part No: 31018
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fenders->Third Mate Fenders
We created this simple, less expensive fender for those of us (the vast majority) who don't hang our fenders horizontally. We eliminated one eye, and constructed our fender with premium vinyl that is soft, flexible and durable. The construction process yields an extremely uniform wall thickness with ribs to minimize roll. Offers the same protection as higher-priced fenders. A needle valve permits precise pressure regulation.
Part No: 431019
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fenders->Third Mate Fenders
We created this simple, less expensive fender for those of us (the vast majority) who don't hang our fenders horizontally. We eliminated one eye, and constructed our fender with premium vinyl that is soft, flexible and durable. The construction process yields an extremely uniform wall thickness with ribs to minimize roll. Offers the same protection as higher-priced fenders. A needle valve permits precise pressure regulation.
Part No: 31019
|
|
|
|
**Thrd. Stud, 1/2-20, 3/8 Cab. |**Thrd.
Part No: S038012
|
|
|
|
**Thrd. Stud, 1/4-28, 1/4 Cab. |**Thrd.
Part No: S014014
|
|
|
|
**Thrd. Stud, 5/8-18, 3/8 Cab. |**Thrd.
Part No: S038058
|
|
|
|
**Thrd. Stud,1/2-20, 5/16 Cab. |**Thrd.
Part No: S516012
|
|
|
|
**Thrd. Stud,3/8-24, 5/16 Cab. |**Thrd.
Part No: S516038
|
|
|
|
**Thrd. Stud,5/16-24, 1/4 Cab. |**Thrd.
Part No: S014516
|
|
|
|
**Thrd. Stud,5/8-18, 7/16 Cab. |**Thrd.
Part No: S716058
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Stainless Threaded Rods
Type 18-8 stainless steel.
Part No: 33606E
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Stainless Threaded Rods
Type 18-8 stainless steel.
Part No: 33602E
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Stainless Threaded Rods
Type 18-8 stainless steel.
Part No: 33604E
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Stainless Threaded Rods
Type 18-8 stainless steel.
Part No: 33603E
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses -> Scrub Brush Kits, Accessories->Threaded Adapter
Use your threaded accessories with your Shurhold poleAdapters are designed especially for the SHURHOLD line of products. Threaded Adapter works with most internally-threaded products. Curved Adapter adds a 30° angle to any Shur-Lok equipped accessories. Two holes at the end provide for 180° rotation.
Part No: 101
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses -> Scrub Brush Kits, Accessories->Deck Brush Accessories
Designed to fit the handles of our Admiral- and Captain-Series Deck Brushes. All have positive-locking, pushbutton, quick-connector sockets that prevent accessories from rotating when in use.
Part No: 040034
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Stainless Threaded Rods
Type 18-8 stainless steel.
Part No: 33601E
|
|
|
|
Home -> Cordage -> Rigging Products->Threaded Swage Studs
Sealoc Swage Stud|SEALOC SWAGE STUD.
Part No: RF1510-0604
|
|
|
|
Home -> Cordage -> Rigging Products->Threaded Swage Studs
Sealoc Swage Stud|SEALOC SWAGE STUD.
Part No: RF1512M-0404
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Sealant-Threadlocker 262|**Sealant-Threadlocker 262.
Part No: 37478
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Sealants
**Sealant-Threadlocker 242|**Sealant-Threadlocker 242.
Part No: 37477
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Sealant-Threadlckr-222|**Sealant-Threadlckr-222.
Part No: 38653
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Sealants
**Sealant-Threadlocker|**Sealant-Threadlocker.
Part No: 37701
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Sealant-Threadlocker|**Sealant-Threadlocker.
Part No: 37643
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Sealant-Threadlocker 271|**Sealant-Threadlocker 271.
Part No: 37479
|
|
|