Top Sellers
2-5/8" x 1-1/2" Euro Utility Hinge from WEST MARINE
Stamped utility hinge with 1/2" offset from TACO. Made of marine grade 304 stainless steel with polished finish, non-corrosive utility hinge is ideal for hatches, cabinets, and doors inside and outside the boat. Measures 2-5/8" x 1-1/2" x .
|
|
|
Clamp-On Rod Holder - 1 1/4"ID Horizontal, Gold from WEST MARINE
Silver or gold tubes are anodized for long life in the marine environment. Fabricated from cold drawn aluminum with no unsightly weld seams. Available in aluminum schedule pipe sizes 3/4" thru 1 1/4" in horizontal and vertical models. If using stainless steel tube, please go down 1/4" in size. Type:Clamp on. # of Rods:One. Material:Aluminum. Lining:White vinyl. Diameter:Rod holder is 1 5/8" ID. Mount:Clamp on.
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
|
|
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
Transom Drain Tube & Plug from MOELLER
This nylon drain tube won't rot, bend or mildew, fits flush to your transom, and allows water to drain when your vessel is trailered. A rubber O-ring makes a watertight seal. Can be loosened with a flat-head screwdriver. Fits 1 1/8'' openings. Mounted with rivets or #8 fasteners.
|
CP Bronze Strap Hinge - 1.125" H x 6" W from PERKO
Chrome plated bronze. Pin Height: 1-1/8" by 6" open width. Each hinge requires six #10 fasteners.
|
CP Zinc Elbow Catch from PERKO
Chrome-plated zinc with stainless steel spring. . Measures: 1 1/8" x 9/16" . Requires #6 RH screws (Not included).
|
Rim Latch Sets - Reverse Bevel with Flush Strike from PERKO
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
|
Surface-Mount Titan Bilge Pump from WHALE PUMPS
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".
|
Vertical Plunger Galley Pump, White from FYNSPRAY
Affordable, quality plastic pump with European styling. Vertical plunger action, with a 4" spout. Material: Chrome. Capacity: 58 strokes/gal. Dimensions: 4"H. Cutout Size: 1 1/4". Clearance 9".
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
|
1, 1-1, Brass Wood Screws, Pack of 100 from FASCO FASTENERS, #10 x 1-1
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Offset 1/2" 2 3/4'' long x 2 1/8'' wide Countersunk for #8 fasteners Sold in pairs.
Part No: 60718
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Barb-Fuel 1/4Fnp x 1/8Mnpt Brs|Barb-Fuel 1/4Fnp x 1/8Mnpt Brs.
Part No: 033417-10
|
|
|
|
Home -> Fishing -> Fishing Accessories
A quality scale with corrosion-resistant brass body and easy-to read increments. Should be in every tackle box. Useful for setting reel drags or weighing the Big One. The 8-1/2 body and cylindrical shape allow easy storage in a tackle box or tackle drawer on your boat.
Part No: 2012
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Self-Close Flat Hinges
Self closing flat hinges. Self-closing mechanism has heavy-duty stainless springs on a high-impact nylon cam, providing smooth, quiet closing action.
Part No: H62-2750BR-1W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Self-Closing Offset Hinges
Self-closing mechanism has heavy-duty stainless springs on a high-impact nylon cam, providing smooth, quiet closing action.
Part No: H62-2751BR-1W
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Brass Slotted Flat Head Wood Screws, 8 x 1-1/2"
Package of 6.
Part No: 086A
|
|
|
|
Home -> Interior, Flags & Gifts -> Clocks, Barometers, & Lamps -> Brass, Miscellaneous
Great aboard or at home! Accurate thermometer is a handsome addition to boat or home. 8"H thermometer reads temperature in °F and °C. Solid brass case and bracket. Solid brass case. Reads in Fahrenheit and Celsius. 8"H.
Part No: GM-2805B-SUB
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers
Makes your trailer virtually theft-proof, whether it's on or off the car. Solid cast and heat treated for toughness.
Part No: 00900-40
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
2" (51mm) Solid Brass Trailer Hitch Coupler Lock Solid brass body . Case hardened steel shackle . Lock design protects shackle from cutting and sawing . Precision pin tumbler mechanism resists picking .
Part No: 605DAT
|
|
|
|
Home -> Interior, Flags & Gifts -> Clocks, Barometers, & Lamps
A classic best seller, the Trawler lamp uses a circular wick to provide an extremely bright circle of light, even in large cabins aboard. (Also available in a smaller size) Hanging bail and built-in smoke bell. Polished brass with a lacquer finish. White enamel shade underside for best light reflection. Large 33. 8 oz. oil or kerosene reservoir burns 30 hours. Round wick burner.
Part No: 8201/O
|
|
|
|
Home -> Electrical -> Interior Lighting -> Led Interior Lights->Saturn Ring Recessed LED Light Trim Rings
Brass and chrome trims for Saturn Ring Recessed LED Lights.
Part No: 8001160
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Brass Phillips Oval Head Screws - Bulk Packs
Brass screws are intended for brass fittings and decorative use.
Part No: 3385
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Brass Wood Screws, Phillips Flat Head, Bulk Packs
Brass screws are intended for brass fittings and decorative use.
Part No: 2746
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Brass Wood Screws, Phillips Flat Head, Bulk Packs
Brass screws are intended for brass fittings and decorative use.
Part No: 2745
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Brass Wood Screws, Phillips Flat Head, Bulk Packs
Brass screws are intended for brass fittings and decorative use.
Part No: 2747A
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Brass Wood Screws, Phillips Flat Head, Bulk Packs
Brass screws are intended for brass fittings and decorative use.
Part No: 2744
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Brass Wood Screws, Phillips Flat Head, Bulk Packs
Brass screws are intended for brass fittings and decorative use.
Part No: 3455A
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Brass Wood Screws, Phillips Flat Head, Bulk Packs
Brass screws are intended for brass fittings and decorative use.
Part No: 2748A
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Brass Wood Screws, Phillips Flat Head, Bulk Packs
Brass screws are intended for brass fittings and decorative use.
Part No: 2838A
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Brass Wood Screws, Phillips Flat Head, Bulk Packs
Brass screws are intended for brass fittings and decorative use.
Part No: 3289
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Brass Wood Screws, Phillips Flat Head, Bulk Packs
Brass screws are intended for brass fittings and decorative use.
Part No: 3279
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Brass Wood Screws, Phillips Flat Head, Bulk Packs
Brass screws are intended for brass fittings and decorative use.
Part No: 3036
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Brass Wood Screws, Phillips Flat Head, Bulk Packs
Brass screws are intended for brass fittings and decorative use.
Part No: 3451
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Brass Wood Screws, Phillips Flat Head, Bulk Packs
Brass screws are intended for brass fittings and decorative use.
Part No: 3364
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Brass Wood Screws, Phillips Flat Head, Bulk Packs
Brass screws are intended for brass fittings and decorative use.
Part No: 2739
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Brass Wood Screws, Phillips Flat Head, Bulk Packs
Brass screws are intended for brass fittings and decorative use.
Part No: 2698
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Brass Wood Screws, Phillips Flat Head, Bulk Packs
Brass screws are intended for brass fittings and decorative use.
Part No: 2738
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Brass Wood Screws, Phillips Flat Head, Bulk Packs
Brass screws are intended for brass fittings and decorative use.
Part No: 2743
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Brass Wood Screws, Phillips Flat Head, Bulk Packs
Brass screws are intended for brass fittings and decorative use.
Part No: 2742
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Brass Wood Screws, Phillips Flat Head, Bulk Packs
Brass screws are intended for brass fittings and decorative use.
Part No: 3180A
|
|
|