Top Sellers
HD 5,000lb. Drop-Leg Trailer Jack from FULTON
HD 5,000lb. Drop-Leg Trailer Jack Heavy-duty fixed-mount with a 5,000lb. capacity and a corrosion-resistant zinc finish.
|
|
|
40ST Chrome ELS Winch, 43'/min.:15'/min. Line Speed; 43A:135A Draw@12V DC from LEWMAR
Electric winches operate at the touch of a button and provide a full manual two-speed override when you want it. The ELS Series use a solid-state control box that runs the winch at high speed and slows it down as the load increases. Quiet running and easy to install, these winches provide efficient operation and are suitable for genoa sheets on boats 30'–36', and for main halyards on boats 40'–46'. Both series include the winch, drive unit, motor, deck switch, control box and circuit breaker.
|
Transom Adapter for Bracket from FULTON
Lets you remove your outboard bracket and outboard for security and less stress and fatigue on the transom while trailering. A locking device helps theft-proof motor and bracket. Heavy-duty marine-grade aluminum with stainless steel mounting bolts supplied. For Adjustable Brackets above (Models 380321 & 389866).
|
Circlips, Package of Five (5) from LEWMAR
Spares Kit, Single-Speed Winches For all single-speed winches less than 11 years old, includes 4 pawls, 4 pawl springs, 4 circlips. . Spares Kit, Two-Speed Winches For all two-speed and self-tailing winches to 16ST-66ST. Includes 2 circlips, 8 pawls, 12 pawl springs, 3 keys, 8 gear spindle sleeves, 2 collets . Spares Kit, Three-Speed Winches For all three-speed nonself-tailing winches to 65. Includes 4 circlips, 8 pawls, 18 pawl springs, 4 plungers, 6 plunger springs, 2 closing rings .
|
|
|
Wincher, 2.25IN TO 2.75IN from WATSKI
Winchers are rubber disks that fit over the top of your non-self-tailing winches to make them perform like self-tailers. Loading up the winch drums until the line contacts the underside of the Wincher creates friction which allows the line to self-tail. A rope groove holds line reasonably securely around the top of the winch. Practical Sailor Magazine suggests Winchers for halyard winches, but not sheet winches, although we have many comments from customers who swear by them.
|
Winch Service Kit from HARKEN
Contains 10 pawls and 10 springs.
|
|
|
Windex 10 Sport Wind Indicator from DAVIS INSTRUMENTS
Easy to remove for trailering In winds as light as 2/10th knots the sapphire suspension bearing allows the Windex to seek wind direction. No other wind vane in the world is as sensitive to extreme light air and small puffs, or as responsive when the breeze picks up. For small boats and dinghies. Includes a 10" vane, adjustable tacking tabs and glass reinforced polycarbonate J-Base for side, top or front of mast mounting. Stands only 9. 25" tall and weighs 1.
|
Inflatable Boat Antifouling Paint from PETTIT
Water-based, multi-season ablative antifouling paint. For hard- or soft-bottom inflatables. Cleans up with water. Black. Quart. Type: Copolymer Ablative. Recommended Usage: PVC or Hypalon; trailered boats. Biocide: CuOx 41%. Additives: No. Compatibility: With all other antifouling paints in good condition except VC-17. Number of Coats Recommended: Two.
|
Engine Winterizing Kit from WEST MARINE
Winterize your outboard or sterndrive with this convenient kitUses your existing flusher and a garden hose to winterize your outboard or sterndrive engine, even while it’s on the trailer. Kit includes a five-gallon jug, hose fittings and instructions for winterizing. You supply five gallons of nontoxic antifreeze for each engine. Complete instructions are included.
|
Arrow Style Windvane from RONSTAN
Small boat wind indicators feature quality construction at a fraction of the price of other windvanes, so they are a great choice for junior sailors who might be rough on the equipment. Ronstan's new vanes are balanced for accuracy and molded in UV-stabilized nylon. The aluminum shaft can be removed from the mast bracket for trailering or security. Both the Pennant and Arrow style indicators include adjustable tacking angle arrows.
|
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
Stainless Strap Hinge, 2 5/8 inch from WEST MARINE
Type 304 electro-polished. Gauge: 0. 060 stainless steel. Drilled and countersunk for #8 fasteners (not included). Sold in pairs. ShWt .
|
|
Trailer Winch Stand from FULTON, 2x20 from FULTON, Trailer Winch Strap
|
|
Home -> Trailer & Parts -> Trailer Lighting
Submersible LED Light Bar fits all major trailer brandsSubmersible LED Identification Light Bar for trailers over 80". Specifically designed to fit America's leading trailer brands. Features three diodes encased in unique single polycarbonate lens and integrated mounting holes on 8" centers. Includes separate lead and ground wires . Ooperates from 9–16V DC. Red.
Part No: 49242-5
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Wheels & Tires
Trailer Keeper foils would-be trailer thieves by temporarily disabling one trailer wheel. Unique Lug Latch fits single, tandem and tri-axle trailers and wheels with 4, 5, or 6 lugs. Hardened, heavy-gauge steel. Easy to use. Simple installation requires no cutting or drilling.
Part No: TK100 0100
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Pipe-Light Trailer Lights
Convenient Trailer Lights insert onto your existing 2" PVC trailer guide-ons for fast, easy installation. Pipe-Lights last longer and offer better visibility because they are higher up than standard trailer lights and they don't get submerged during launching and loading. Amber reflective tape on light housing aids in backing trailer at night. Each kit contains one pair of Pipe-Lights with 10' wire leads and wire connectors for easy installation.
Part No: 1019
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories
Insulation Displacement Connectors. Use with 18-16 gauge wire. Moisture resistant. no cutting or stripping.
Part No: 03816NA
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lights, Wiring
Protects against dirt and corrosion when plug is not in use.
Part No: 3E-A7300
|
|
|
|
Home -> Engine Systems -> Engine Parts
16 GA,4 Pole - 24" Ready-Wired #M241120.
Part No: WH10220
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers
Hot-dipped galvanized steel carrier mounts to frame or tongue. Adjusts for frames up to 4"H x 3"W. Holds 4- or 5-lug wheels. Includes two sizes of U-bolts and all needed hardware.
Part No: 27310G
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Trailer Brakes/Axles->Replacement Trailer Springs
Heavy duty steel with 9/16"ID nylon bushings. All are slipper type, except the double eye springs.
Part No: 81197
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Replacement Trailer Springs
Heavy duty steel with 9/16"ID nylon bushings. All are slipper type, except the double eye springs.
Part No: 81196
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Replacement Trailer Springs
Heavy duty steel with 9/16"ID nylon bushings. All are slipper type, except the double eye springs.
Part No: 81198
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Replacement Trailer Springs
Heavy duty steel with 9/16"ID nylon bushings. All are slipper type, except the double eye springs.
Part No: 81199
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Replacement Trailer Springs
Heavy duty steel with 9/16"ID nylon bushings. All are slipper type, except the double eye springs.
Part No: 81194
|
|
|
|
Home -> Engine Systems -> Engine Lubrication
Protects bearings against salt air, saltwater and atmospheric chemical corrosion. For wheel bearings (including disc brake wheel bearings), swivel hinges, pins, winches and anchor chain reels. Lubricates and protects bearings. Great for wheel bearings, swivel hinges, pins, and winches. Avaialble in two 3oz. cartridges, 14oz. cartridge, 1lb. can or 5. 2oz.
Part No: 3704715
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Wheels & Tires->Trailer Wheel Lug Nuts & Bolts
Replacement lug nuts and bolts for your trailer wheels. Sets of 5. 1/2"-20 nuts. 1/2"-20 x 1.
Part No: 11062A
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Wheels & Tires->Trailer Wheel Lug Nuts & Bolts
Replacement lug nuts and bolts for your trailer wheels. Sets of 5. 1/2"-20 nuts. 1/2"-20 x 1.
Part No: 11052A
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks->Manual Trailer Winches
Economical manual winches for smooth, easy trailer loadingThese economical manual winches are designed with just the right mechanical advantage for smooth, easy loading of your vessel onto its trailer. They feature a corrosion-resistant, zinc-plated finish, high-carbon steel gears, heavy-duty ribs to help maintain proper alignment, a full-length drum bushing and oil-impregnated shaft bushings. The 2,600lb. model features two speeds: fast, for quick retrieval, and slow, for heavier loads.
Part No: T1100Z0101
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks->Manual Trailer Winches
Economical manual winches for smooth, easy trailer loadingThese economical manual winches are designed with just the right mechanical advantage for smooth, easy loading of your vessel onto its trailer. They feature a corrosion-resistant, zinc-plated finish, high-carbon steel gears, heavy-duty ribs to help maintain proper alignment, a full-length drum bushing and oil-impregnated shaft bushings. The 2,600lb. model features two speeds: fast, for quick retrieval, and slow, for heavier loads.
Part No: T1500Z0101
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Trailer Winches->Manual Trailer Winches
Economical manual winches for smooth, easy trailer loadingThese economical manual winches are designed with just the right mechanical advantage for smooth, easy loading of your vessel onto its trailer. They feature a corrosion-resistant, zinc-plated finish, high-carbon steel gears, heavy-duty ribs to help maintain proper alignment, a full-length drum bushing and oil-impregnated shaft bushings. The 2,600lb. model features two speeds: fast, for quick retrieval, and slow, for heavier loads.
Part No: T1801Z0101
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Trailer Winches->Manual Trailer Winches
Economical manual winches for smooth, easy trailer loadingThese economical manual winches are designed with just the right mechanical advantage for smooth, easy loading of your vessel onto its trailer. They feature a corrosion-resistant, zinc-plated finish, high-carbon steel gears, heavy-duty ribs to help maintain proper alignment, a full-length drum bushing and oil-impregnated shaft bushings. The 2,600lb. model features two speeds: fast, for quick retrieval, and slow, for heavier loads.
Part No: T2605Z0101
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Trailer Winches
Designed to quickly and permanently mount your trailer with bolt-through plate for trailer tongues to 3" x 3". For convenient launch and retrieval, plus added security while towing. Corrosion-resistant solid steel construction. Reliable, smooth-rolling gears. 900 lb. load capacity - use with Model 382087. Mounting hardware included. Requires no drilling.
Part No: WS900 0101
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks
2"W x 20"L strap has a 10,000lb. breaking strength and a 4,000lb.
Part No: WS20HD0600
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lights, Wiring
Secure wire to trailer frame, preventing wire fatigue and possible wire damageTrailer Wire Frame Clips,10Pc.
Part No: TX-CLIP
|
|
|
|
Home -> Engine Systems -> Engine Parts
Volvo 3847547 Fits: Volvo SX-A, DPS-A (2007-Up).
Part No: 18-9096
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Trailering Clips
Clip onto the extended ram of the outdrive tilt cylinder to take the pressure off while trailering. OMC fits all Cobra Sterndrives. Mercruiser fits AlphaOne/Gen II and Bravo. Sold in pairs.
Part No: 18-9099
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Mercury Ob Repair Parts
Fits MC-I, R, MR, Alpha, Bravo and Blackhawk.
Part No: 817019Q2
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Jackets & Fleece->Transat Snug Vest
Crew vest with yacht club style that provides extra weather protection. An instant classic. Features: 2-layer SprayTech construction. Fleece lined collar and body. Hand pockets.
Part No: WHITE-L
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Jackets & Fleece->Transat Snug Vest
Crew vest with yacht club style that provides extra weather protection. An instant classic. Features: 2-layer SprayTech construction. Fleece lined collar and body. Hand pockets.
Part No: WHITE-M
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Jackets & Fleece->Transat Snug Vest
Crew vest with yacht club style that provides extra weather protection. An instant classic. Features: 2-layer SprayTech construction. Fleece lined collar and body. Hand pockets.
Part No: WHITE-S
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Jackets & Fleece->Transat Snug Vest
Crew vest with yacht club style that provides extra weather protection. An instant classic. Features: 2-layer SprayTech construction. Fleece lined collar and body. Hand pockets.
Part No: WHITE-XL
|
|
|
|
Home -> Electronics -> Fishfinders -> Transducers and Accessories->Sonar Accessories
Included are: New Portable Transducers: mount on the transom or side of almost any wood, aluminum, or fiberglass boat and are for use at trolling speeds only New Trolling Motor Mount Transducers: designed to mount on to the body of most trolling motors AD-STM Trolling Motor Adaptor: Adapter hardware for attaching high speed sensor to trolling motor Other Thru-hull and transom mount transducers and hardware kits Temperature and speed sensors Transducer switches.
Part No: 720003-1
|
|
|