Top Sellers
Medium Trapeze Harness, 5'7"–5'10" Wearer Height, 38"–40" Wearer Chest Size from GILL INTERNATIONAL
Worn by many top sailors around the world, the spreader bar on this harness positions the weight over the hips, reducing painful pressure points and increasing comfort during long periods in the harness. Features the RWO “QRH” pushbutton Quick Release Hook for safer trapezing. Includes multiple adjustment points and a padded lumbar support.
|
Aquatech Boots, Black, 7 from GILL
2mm double-lined neoprene boots are idea for dinghy and small boat performance sailing and offer protection and secure footing in demanding conditions. They feature a wraparound, non- marking natural rubber sole for improved grip, flatlocked seams for comfort and an adjustable strap for maximum support. .
|
Black 3-Strand Nylon, 7/16'' Diameter, 5300lb. Breaking Strength from NEW ENGLAND ROPES
Dramatic resistance to damaging internal and external abrasion Combining premium nylon fiber with a high-quality marine coating and New England Ropes superior manufacturing processes produces line that is five times more abrasion-resistant wet than any other nylon line. You can actually feel this critical performance advantage when you handle the supple line. Stretch: 16% at 15% of breaking strength. *Approximately 10–15% less strength than White Premium Three-Strand Nylon.
|
Cabinet Handle, Stainless Steel Bar 7" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
|
Framed Tackle Backpack from CALCUTTA OFFSHORE BA
Carry tackle on your back and leave your hands free Designed with a durable internal frame, breathable foam back support and padded shoulder straps to make carrying heavier loads of fishing gear easier. Features: Fold-out lure storage pockets. Waterproof pouch system. Padded horizontal security pocket . 10" sink compartment.
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Walker Bay 10, 9'8" Length, 4'9" Beam, 126lb., 449lb. Capacity (up to 3 people) from WALKER BAY BOATS
Bolt in the seats, break out the oars (or optional sail kit or motor) and you’re ready to cast off. Boats include exclusive Hydro-Curve Oars. Application: Rowing, motoring or sailing . Hull Material: High Impact Polypropylene . Construction: High-pressure injection molded . Hull Shape: Round bottom lapstrake-style . Standard Hardware: Oars, oar locks, seats, stainless bow eye, Wheel in the Keel™ . Available Accessories: Sail kits, RID kits, Bimini boat cover . Warranty: 10 years limited.
|
500gph 12V Bilge Pump, 1.9A Draw at 12V DC, 3/4" Port, 4"H x 2-3/8"W from RULE INDUSTRIES
An internal computer chip cycles these pumps on every 2. 5 minutes, then quickly shuts them down if no water is detected. Built-in strainer bases snap off to make cleaning easy. Completely submersible, rust-proof, corrosion-proof and ignition-protected. Three-way wiring enables connection to a switch for manual override or indicator light. Small 500gph pump is designed to handle spray and rainwater. Built-In Switch: Yes, cycles every 2. 5 min.
|
Climate Gear Tool Bag from CUSTOM LEATHER CRAFT
Soft tool bag resists weather, won't skid More practical than a rigid tool box, this bag easily stores in the odd-shaped nooks and crannies of boats. The tough tarpaulin construction is enhanced by a polyester bottom with rubber strips to keep it from siding across your deck! Features: Large internal compartment with 12 tool loops . External compartment with weather-resistant zipper. Includes: Carpet-bag-style handles . Dimensions: 14"L x 12 1/2"W x 11"H.
|
Capstan 1000 Rope Winch from POWERWINCH
Versatile system uses an easy to operate foot switch to retrieve anchors or fishing pots or provide power assistance on limited crew sailboats. Solid, 1-piece, machined capstan features aluminum housing with stainless steel internal shafts and hardware. Deck mounted design saves space for rope locker. Mounting template included. Pulling Power: 1000lbs. Speed Up: 40'/min. Boat size: to 55' . Rope Type: 3-strand nylon. Draw: 27A @12v. Measure 6 5/16"H x 8"W x 10 9/16"L.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Crab Pot Puller from ENDURANCE MARINE
This powerful workhorse makes hauling prawn and crab pots quick and easy. Designed for high-speed retrieval with a robust 1. The heavy-gauge, marine-grade aluminum frame is powder coated for corrosion-resistance and can handle loads up to 150lb. The included foot control switch provides safety, ease of use and allows both hands free to bail line. Engineered to mount on the Scotty downrigger mount #1023, Model 435050, found on page 922. Stainless-steel internal shafts, fasteners and hardware.
|
Cabinet Handle, Stainless Steel Bar 13" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
|
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
ADJ 7-15-DL Whisker Pole, 83"/9lb. Collapsed Length/Weight, 202" Max. Working Length, 2" Tubing Diameters from FORESPAR
These telescoping whisker poles are heavy-duty two-section and three-section aluminum spars which can be extended to lengths up to 17' and securely locked in position by an internal twist lock device. Poles feature self-latching Ultra Series™ fittings on the inboard and outboard ends. Aluminum tubing. End Fitting Inboard: UPX. End Fitting Outboard: UPX.
|
|
7 from GILL INTERNATIONAL, Handle from SEADOG, 10 from GILL INTERNATIONAL
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks
For mounting ladders on poly, teak or fiberglass swim platforms. Mounts underneath and includes a top backing plate. Use with spacer and face plate included with ladder. Stainless steel. Bracket: 3. 18''W x 9. 75''L. Top plate: 3''W x 7.
Part No: 99182:01
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Transom Seals & Kits
Also includes other high-wear items like the gimbal bearings.
Part No: 18-8206
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains -> Drive Train Parts->Transom Seals & Kits
Also includes other high-wear items like the gimbal bearings.
Part No: 18-8212
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils
The transom on some pontoon boats are inset with an aluminum lip along the sides. To conveniently mount the PT-130 to this type transom, this transom spacer is available.
Part No: 13032
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks
Molded from super-strong glass-reinforced plastic.
Part No: 227260-1
|
|
|
|
Home -> Engine Systems -> Motor Mounts -> Motor Mounts
High-quality, cast aluminum plate mounts in the splashwell with your motor's mounting bolts. Distributes the stress and weight of the motor to protect the transom.
Part No: TSP-1-DP
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils
Weatherproof tilt control switch can be installed anywhere on the boat, such as back by the motor for more convenience. Can adjust trim or jack plates.
Part No: TTC-1-DP
|
|
|
|
Home -> Engine Systems -> Motor Mounts -> Motor Mounts
Cast-aluminum construction wedges allow full contact between the engine bracket and transom, protecting the transom even in rough waters. Fit newer model OMC and Mercury engines, and bolt-on engines with factory-installed tilt and trim.
Part No: TW-2-DP
|
|
|
|
Home -> Fishing -> Fishing Accessories -> Rod Holders
Maximize on-board rod storage with this transom-mount rod rackIt mounts directly on the transom, thus freeing up gunwales and decks, while providing storage for up to three rods. Durable brushed aluminum finish is designed to withstand the rigors of prolonged use in saltwater conditions. Patent-pending spline technology lets you lock in the desired angle for the rack, which can be adjusted during easy, bolt-down installation to fit the boat’s transom.
Part No: F31-3503BSA-1
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Replacement Parts for Perko 0493-Series Raw Water Strainers
Replacement Gaskets, Strainer Baskets & Bolts for 0493-Series Strainers.
Part No: 049300499C
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->Transparent Duct Tape
Duct tape for repairs that actually look good! Transparent duct tape ends the eyesore of conventional duct tape repairs. It is as strong as conventional heavy-duty duct tape and may be used for the same repairs. Tears easily by hand crosswise or lengthwise, is water and UV resistant, and is easily separated from itself when adhesive sides come in contact. Adheres to a wide range of materials, including plastic, wood, glass, metal, vinyl and rubber. General purpose fixit tape. Width: 1.
Part No: 2120-A
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->Transparent Duct Tape
Duct tape for repairs that actually look good! Transparent duct tape ends the eyesore of conventional duct tape repairs. It is as strong as conventional heavy-duty duct tape and may be used for the same repairs. Tears easily by hand crosswise or lengthwise, is water and UV resistant, and is easily separated from itself when adhesive sides come in contact. Adheres to a wide range of materials, including plastic, wood, glass, metal, vinyl and rubber. General purpose fixit tape. Width: 1.
Part No: 83358
|
|
|
|
Home -> Fishing -> Fishing Accessories->Replacement Part Kits and Spare Parts
Replacement parts for Scotty Downriggers.
Part No: 750
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers
The cleat has an in-built pulley that offers a compact solution for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock that is easy to release is required. The sailor's preferred choice for adjusting trapeze lines.
Part No: C253
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Molded nylon trapeze handle has a contoured safety grip and a wire guide to prevent hand contact with wire. Blue.
Part No: PNP171BLU
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Includes an integral height adjustment block with ball bearing sheave. Weighs 2. 5oz.
Part No: RF17
|
|
|
|
Home -> Shoes & Boots -> Waterproof Boots -> Dinghy Boots->Trapeze/Dinghy Boots
This is the boot chosen by the US Sailing team’s dinghy racing crews. A wraparound natural rubber sole provides an enhanced grip. The uppers are snug-fitting 5mm stretch neoprene with reinforcements in the heel, toe and instep areas. Nylon zippers make them easy to put on and take off. A Velcro secured strap at the top ensures that they won’t come off when you least expect it.
Part No: BLACK-10
|
|
|
|
Home -> Shoes & Boots -> Waterproof Boots -> Dinghy Boots->Trapeze/Dinghy Boots
This is the boot chosen by the US Sailing team’s dinghy racing crews. A wraparound natural rubber sole provides an enhanced grip. The uppers are snug-fitting 5mm stretch neoprene with reinforcements in the heel, toe and instep areas. Nylon zippers make them easy to put on and take off. A Velcro secured strap at the top ensures that they won’t come off when you least expect it.
Part No: BLACK-11/12
|
|
|
|
Home -> Shoes & Boots -> Waterproof Boots -> Dinghy Boots->Trapeze/Dinghy Boots
This is the boot chosen by the US Sailing team’s dinghy racing crews. A wraparound natural rubber sole provides an enhanced grip. The uppers are snug-fitting 5mm stretch neoprene with reinforcements in the heel, toe and instep areas. Nylon zippers make them easy to put on and take off. A Velcro secured strap at the top ensures that they won’t come off when you least expect it.
Part No: BLACK-13
|
|
|
|
Home -> Shoes & Boots -> Waterproof Boots -> Dinghy Boots->Trapeze/Dinghy Boots
This is the boot chosen by the US Sailing team’s dinghy racing crews. A wraparound natural rubber sole provides an enhanced grip. The uppers are snug-fitting 5mm stretch neoprene with reinforcements in the heel, toe and instep areas. Nylon zippers make them easy to put on and take off. A Velcro secured strap at the top ensures that they won’t come off when you least expect it.
Part No: BLACK-7
|
|
|
|
Home -> Shoes & Boots -> Waterproof Boots->Trapeze/Dinghy Boots
This is the boot chosen by the US Sailing team’s dinghy racing crews. A wraparound natural rubber sole provides an enhanced grip. The uppers are snug-fitting 5mm stretch neoprene with reinforcements in the heel, toe and instep areas. Nylon zippers make them easy to put on and take off. A Velcro secured strap at the top ensures that they won’t come off when you least expect it.
Part No: BLACK-7/8
|
|
|
|
Home -> Shoes & Boots -> Waterproof Boots -> Dinghy Boots->Trapeze/Dinghy Boots
This is the boot chosen by the US Sailing team’s dinghy racing crews. A wraparound natural rubber sole provides an enhanced grip. The uppers are snug-fitting 5mm stretch neoprene with reinforcements in the heel, toe and instep areas. Nylon zippers make them easy to put on and take off. A Velcro secured strap at the top ensures that they won’t come off when you least expect it.
Part No: BLACK-9
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Hatch Accessories->HATCHshades
**RAILSHADE SIZE 65 WHITE.
Part No: RSH-65-W
|
|
|
|
The seaworthy solution to handling trash aboard Resin frame with hinged cover mounts on any smooth surface with three suction cups or can be permanently mounted with screws. Holds standard grocery bags or plastic kitchen bags. Get one for the galley and one for the cockpit. Easy-to-mount resin frame.
Part No: 2132-8
|
|
|
|
The seaworthy solution to handling trash aboard Resin frame with hinged cover mounts on any smooth surface with three suction cups or can be permanently mounted with screws. Holds standard grocery bags or plastic kitchen bags. Get one for the galley and one for the cockpit. Easy-to-mount resin frame.
Part No: 2132-1
|
|
|
|
Home -> Cabin & Galley -> Bedding & Drapery -> Sleeping Bags, Bedrolls->TravaSak Sleep System
.
Part No: 162BI
|
|
|
|
Home -> Cabin & Galley -> Bedding & Drapery -> Sleeping Bags, Bedrolls->TravaSak Sleep System
.
Part No: 164BI
|
|
|
|
Home -> Cabin & Galley -> Bedding & Drapery -> Sleeping Bags, Bedrolls->TravaSak Sleep System
.
Part No: 164SI
|
|
|
|
Home -> Cabin & Galley -> Bedding & Drapery -> Sleeping Bags, Bedrolls->TravaSak Sleep System
.
Part No: 164TI
|
|
|
|
Home -> Boats & Motors -> Outboard Motors->Travel 401 Electric Outboards
A rechargeable lithium-manganese high-performance battery connects to the head of the motor, eliminating the need for heavy batteries and cumbersome connections. It is easy to charge with the included 110V AC charger and lasts up to two hours depending on conditions and energy demand. Due to its unique folding mechanism, the Travel breaks down quickly to pack into the included waterproof carry bag for easy storage. A perfect choice for smaller boats including tenders, dinghies and daysailors.
Part No: 1108
|
|
|