The Original Doel-Fin Hydrofoil from DAVIS INSTRUMENTS
Get your boat on a plane quickly by increasing the lift generated by the engine. They also allow you to go more slowly while still remaining on a plane, so fuel consumption is decreased. The injection-molded tenite polypropylene fins install easily on the cavitation plate of most outboards from 5 hp and up . Includes Mounting hardware .

SE Sport 300 Hydrofoil, White, 40 to 350HP Engine Capacity from SPORT MARINE TECHNOL
Especially good for deck boats and pontoon boats Adding this hydrofoil gives you a whole new level of control. Corner tighter, defeat cavitation and prop blow out. The patented sleek shape is rated the fastest hydrofoil plate in its class by independent testing. Narrow footprint translates to less resistance drag in the water for greater speed and lower rpm. Maintains top end speed smoothly and pops you out of the hole quicker. Turn a sluggish deck/pontoon boat into a sharp-turning machine.

SE Sport 300 Hydrofoil, Black, 40 to 350HP Engine Capacity from SPORT MARINE TECHNOL
Especially good for deck boats and pontoon boats Adding this hydrofoil gives you a whole new level of control. Corner tighter, defeat cavitation and prop blow out. The patented sleek shape is rated the fastest hydrofoil plate in its class by independent testing. Narrow footprint translates to less resistance drag in the water for greater speed and lower rpm. Maintains top end speed smoothly and pops you out of the hole quicker. Turn a sluggish deck/pontoon boat into a sharp-turning machine.

4" Atlas Hydraulic Jack Plate from T-H MARINE
T-H Marine introduces the next generation in jack plate design, built for the heaviest and most powerful V6 engines on the market today, even the big four strokes. Its innovative high-tech engineered polymer rod and slot lifting design guarantees trouble-free action. This plate also features the newest concept in one-piece hydraulics from the most respected name in hydraulic design, providing the best of all worlds: Speed and self-contained lifting action.

Water Impeller Repair Kit from MERCURY MARINE
Water Impeller Repair Kit for 4hp to 8hp.

AC3000 Auto Trim Tab Control from BENNETT MARINE
Automatic controls for your Bennett Trim Tab system Give your trim tab system real smarts! The Auto Tab Control dials in the perfect running attitude. Just turn it on and it does the rest. Constantly monitors your boat's position and uses your trim tabs to maintain a perfect cruising attitude. Saves fuel and creates the perfect ride .

Solenoid Valve, Red Wire from BENNETT MARINE
Installation and replacement parts for Bennett Trim Tabs.

Anode Kit - 818298Q 1 from MERCURY MARINE
Mercury/MerCruiser Anodes and Anode Kit - VPN - - Description - - Fits - A 31640Q 4 Trim Tab Anode Fits most Mercury/Mariner outboards 35 hp. & above and all MerCruiser except Bravo. & above and all MerCruiser except Bravo. C 806189Q 1 Trim Cylinder Anode Fits Alpha One Gen II drives. D 806190Q 1 Trim Cylinder Anode Fits Bravo I, II, III, X, XR, XZ and Blackhawk drives. F 826134Q Side Pocket Anode Fits Mercury/Mariner 30-300hp outboards, Force 90 & 120hp 1995 and newer outboards.

Mercury/Mercruiser 76214Q5 New Style Flat Trim Tab Zinc Anode from MERCURY MARINE
Mercury/Mariner 35-300 hp Force 90 & 120 hp 1995 and newer Mercruiser Alpha one generation II Bravo I, II & III.

Transom Trim Control from T-H MARINE
Weatherproof tilt control switch can be installed anywhere on the boat, such as back by the motor for more convenience. Can adjust trim or jack plates.

Johnson/Evinrude, motor only, for 2-wire systems, 90–225hp (1991–1999) from SIERRA
Tilt/Trim Motors, Outboard Applications.

Cabin Hatch/Vent from LEWMAR
Designed to fit Lewmar hatches or to be mounted on deck, this vent features a built-in gasketed bung that makes it 100% watertight. The trim piece is available for thru-deck installations. Includes mounting screws. Type: Passive vent . Material: Acrylic composite . Dimensions: 2-1/4"H x 6-3/4" Dia. . Cutout Size: 3" .

Teak Bulkhead Molding - 2 1/4" Radius, Inside Corner, 5/8"H x 71 3/16"W with 3/4" Gap from SEATEAK
Assorted Teak Finish Trim Moldings.

Power Trim & Steering Fluid, 32oz. from QUICKSILVER
A universal hydraulic fluid designed to mix with all hydraulic fluids, protect seals and hoses, and prevent foaming, oxidation and corrosion.

Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.