Top Sellers
Calibrated Resin Pump Set from MAS EPOXY
For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers.
|
Cetol Marine Light - Quart from INTERLUX
Enhances and protects the natural beauty of interior and exterior woodSemi-transparent finish prevents weathering and repels water. just wash wood thoroughly and apply. Three coats are recommended for the first application, followed by annual touchups. Marine Light is more translucent than Marine. If a gloss finish is desired, either may be overcoated with Marine Gloss. Quart. Long-lasting adhesion and protection from UV rays and weathering. Flexible, breathable, translucent finish; Quarts.
|
VC-Offshore - Baltoplate Gray, Gallon from INTERLUX
Used by performance boatsVC Offshore combines superior antifouling performance with a super smooth low friction surface for the performance conscious boater. This high-strength, vinyl antifouling paint, fortified with Teflon® yields a hard, very smooth finish for maximum durability, reduced friction and increased performance. High copper loading fights fouling on performance boats in saltwater. Can be used in fresh, salt and brackish waters. Should not be applied over non-vinyl bottom paints.
|
Micron CSC Antifouling Paint, Red, Quart from INTERLUX
Haul and relaunch without loss of performance The innovative copper-copolymer formula of Micron CSC provides a controlled release of antifouling biocide at the paint surface, which means that the longevity of the coating is related to the amount of paint applied. Can be applied over most paints in good condition. Micron CSC will not lose its effectiveness when hauled out of the water for extended periods of time (such as winter storage). Type: Copolymer . 2% Cuprous Oxide . Additives: None .
|
Brightside Pre-Kote Primer - Gray, Quart from INTERLUX
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.
|
Chris Craft Stain #573 - Pint from INTERLUX
Chris Craft Stain - Pint Fills grain while staining wood, reducing the number of coats of varnish needed. May also be used on bare mahogany planking before applying primer or sanding surfacer.
|
Adaptor Fitting for Suzuki & Honda Lower Units from WEST MARINE
Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefisher lower units Fits standard quart plastic bottles. Flexible hose gets to hard-to-reach fill plugs.
|
Fiberglass Cleaner and Wax - Quart from SEAPOWER MARINE PROD
Cleans and waxes in one easy stepCleans, waxes, seals and protects the fiberglass surface. Contains the finest Carnauba waxes and silicones and removes surface oxidation, residue, dock marks, grease and dirt while leaving behind a durable high-gloss finish. Excellent for hand or machine use. Quart.
|
Nauta 9 Gallon Flexible Fuel Tank from IMTRA CORPORATION
Flexible gasoline tanks won't rust, don't rattle, are easy to tie down, easy to carry, and won't scrape your boat. The Nauta 9-Gallon flexible fuel tank features comfortable, molded carrying handles and rugged 840-denier nylon construction. Fitted with a 1 1/2'' pivoting fill and a capped and 1/4'' NPT hose barb. Measures 28 1/2'' x 17 1/2'' x 6 1/2''.
|
Orpine Boat Soap, Quart from ORPIN
Fresh pine scent!Replaces musty mildew odors with a pleasant fresh pine scent. Just one ounce in three gallons of fresh or saltwater will clean a 45'L boat. Biodegradable. Biodegradable.
|
Teak Care - Brightener, Quart from STARBRITE
Clean, brighten and protect your teak in three easy stepsBeautiful teak in three easy steps! Kit contains three pint-sized bottles, one each of Cleaner to remove stains and weathering; Brightener to highlight the natural grain and enhance color; and Oil to seal and protect wood from weather and UV damage. Individual, quart-sized bottles are also available. Cleaner chemically roots out stains, including ugly black mildew stains. Brightener restores teak's lustrous hue.
|
Fiberglass Boat Cleaner 920 1/2 Gallon from COLLINITE
Removes rust, exhaust, oil, grease, and oxidation stains from fiberglass. Restores the original color quickly without hard rubbing or buffing, leaves a chemically clean surface to which waxes can bond. Use with fiberglass boat wax or heavy-duty paste Fleetwax . Made in U. S. A.
|
High Gloss Gelcoat Compound Gallon from 3M PRODUCTS
Leaves a high gloss finish without wheel or swirl marksRemove fine scratches from production gel coat. Unique formulation reduces slinging while buffing and leaves a high gloss finish without wheel or swirl marks. Contains no wax or silicone.
|
|
|
Methyl Ethyl Ketone Solvent - Quart from KLEAN STRIP
A strong cleanup solvent—very effective for epoxiesMEK has characteristics similar to acetone, but is 30% slower evaporating.
|
|
Quart from INTERLUX, Gallon from INTERLUX, L from BERN UNLIMITED
|
|
Home -> Ventilation -> Air Conditioning & Cooling->Breathe Easy Air Filters
Breathe Easy Air Filters feature electrostatically charged fibers that attract and retain micro-particles in the air. They have been found to be eight times more effective than ordinary slide-in mesh screen air conditioning filters at capturing airborne micro-particles not visible to the eye. They are easy to install for all types of air conditioners. Selection is simple. Measure the width and height of the evaporator face of your air conditioner and refer to the sizes listed.
Part No: 235000602
|
|
|
|
Home -> Ventilation -> Air Conditioning & Cooling->Breathe Easy Air Filters
Breathe Easy Air Filters feature electrostatically charged fibers that attract and retain micro-particles in the air. They have been found to be eight times more effective than ordinary slide-in mesh screen air conditioning filters at capturing airborne micro-particles not visible to the eye. They are easy to install for all types of air conditioners. Selection is simple. Measure the width and height of the evaporator face of your air conditioner and refer to the sizes listed.
Part No: 235000601
|
|
|
|
Home -> Boats & Motors -> Dinghies
Offered as a complete package, the Breeze 8 is fun and safe and a great way to learn to sail! Features include an easy-to-handle, compact sailing rig with high-aspect sail design for better performance in light air. The angled boom affords more head room and the inflated PVC tube increases the stability and safety of the boat. An outer nylon cover protects the tube from abrasion and harmful UV light. Hull Shape: Round bottom lapstrake style . Length: 9' . Beam: 5'8" . Weight: 99lb.
Part No: 30307
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Breeze-Booster Hatch Ventilating System
Catch the breeze! Funnel the slightest breeze into your boat. Self-supporting system is simple to install in just two steps on power or sail boats and is an efficient way to ventilate your cabin through hatches and portlights. Made of durable ripstop nylon and fiberglass bows with all parts assembled.
Part No: SMALL-BL
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Breeze-Booster Hatch Ventilating System
Catch the breeze! Funnel the slightest breeze into your boat. Self-supporting system is simple to install in just two steps on power or sail boats and is an efficient way to ventilate your cabin through hatches and portlights. Made of durable ripstop nylon and fiberglass bows with all parts assembled.
Part No: MEDIUM-BL
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Breeze-Booster Hatch Ventilating System
Catch the breeze! Funnel the slightest breeze into your boat. Self-supporting system is simple to install in just two steps on power or sail boats and is an efficient way to ventilate your cabin through hatches and portlights. Made of durable ripstop nylon and fiberglass bows with all parts assembled.
Part No: LARGE-BL
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Breeze-Booster Hatch Ventilating System
Catch the breeze! Funnel the slightest breeze into your boat. Self-supporting system is simple to install in just two steps on power or sail boats and is an efficient way to ventilate your cabin through hatches and portlights. Made of durable ripstop nylon and fiberglass bows with all parts assembled.
Part No: PORT-BL
|
|
|
|
Home -> Electronics -> Global Positioning Systems->DSM250 Multi-Function Color Display
Maretron’s DSM250 is a high-resolution sunlight viewable color display that allows easy interpretation of NMEA 2000® instrument and navigation data through custom display configurations, featuring an easy-to-use five-key illuminated keypad. The DSM250 will directly connect with any NMEA 2000® network and display any or all information captured throughout the vessel. Various audio and visual alarms are also programmable. Its compact waterproof housing will provide years of reliable performance.
Part No: DSM250-01
|
|
|
|
Home -> Electronics -> Global Positioning Systems->DSM250 Multi-Function Color Display
Maretron’s DSM250 is a high-resolution sunlight viewable color display that allows easy interpretation of NMEA 2000® instrument and navigation data through custom display configurations, featuring an easy-to-use five-key illuminated keypad. The DSM250 will directly connect with any NMEA 2000® network and display any or all information captured throughout the vessel. Various audio and visual alarms are also programmable. Its compact waterproof housing will provide years of reliable performance.
Part No: DSM250-02
|
|
|
|
Home -> Electronics -> Global Positioning Systems->DSM250 Multi-Function Color Display
Maretron’s DSM250 is a high-resolution sunlight viewable color display that allows easy interpretation of NMEA 2000® instrument and navigation data through custom display configurations, featuring an easy-to-use five-key illuminated keypad. The DSM250 will directly connect with any NMEA 2000® network and display any or all information captured throughout the vessel. Various audio and visual alarms are also programmable. Its compact waterproof housing will provide years of reliable performance.
Part No: DSM250-03
|
|
|
|
Home -> Sailboat -> Rigging Products
Bright red and blue polypropylene covers look great and provide UV-protection.
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories->Women's Brighton Helmet
The Brentwood is the lightest-weight, lowest-profile action sports helmet available. Check it out. Note: Zipmold hard foam meets ASTM F 2040, CPSC and EN 1078 standard for bike and skate. . Weight: 12. 5 oz.
Part No: WW2BHMBKL
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories->Women's Brighton Helmet
The Brentwood is the lightest-weight, lowest-profile action sports helmet available. Check it out. Note: Zipmold hard foam meets ASTM F 2040, CPSC and EN 1078 standard for bike and skate. . Weight: 12. 5 oz.
Part No: WW2BHMBKM
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories->Women's Brighton Helmet
The Brentwood is the lightest-weight, lowest-profile action sports helmet available. Check it out. Note: Zipmold hard foam meets ASTM F 2040, CPSC and EN 1078 standard for bike and skate. . Weight: 12. 5 oz.
Part No: WW2BHMBKS
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories->Women's Brighton Helmet
The Brentwood is the lightest-weight, lowest-profile action sports helmet available. Check it out. Note: Zipmold hard foam meets ASTM F 2040, CPSC and EN 1078 standard for bike and skate. . Weight: 12. 5 oz.
Part No: WW2BHMBKXS
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories->Women's Brighton Helmet
The Brentwood is the lightest-weight, lowest-profile action sports helmet available. Check it out. Note: Zipmold hard foam meets ASTM F 2040, CPSC and EN 1078 standard for bike and skate. . Weight: 12. 5 oz.
Part No: WW2BHMCL
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories->Women's Brighton Helmet
The Brentwood is the lightest-weight, lowest-profile action sports helmet available. Check it out. Note: Zipmold hard foam meets ASTM F 2040, CPSC and EN 1078 standard for bike and skate. . Weight: 12. 5 oz.
Part No: WW2BHMCM
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories -> Watersport Accessories->Women's Brighton Helmet
The Brentwood is the lightest-weight, lowest-profile action sports helmet available. Check it out. Note: Zipmold hard foam meets ASTM F 2040, CPSC and EN 1078 standard for bike and skate. . Weight: 12. 5 oz.
Part No: WW2BHMCS
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories->Women's Brighton Helmet
The Brentwood is the lightest-weight, lowest-profile action sports helmet available. Check it out. Note: Zipmold hard foam meets ASTM F 2040, CPSC and EN 1078 standard for bike and skate. . Weight: 12. 5 oz.
Part No: WW2BHMCXS
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Topside Paint->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4258/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4259/1
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4259/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4207/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4316/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4233/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4248/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4990/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4217/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4208/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4190/QT
|
|
|