Prop Removal Kit from NATIONAL PRODUCTS
PRO-PULL Kits let you quickly remove 3- and 4-blade propellers from inboard shafts with a 3/4'' to 1 1/8'' diameter. The tool is made of heat-treated steel and features fine-thread screws for tremendous pulling force with very little effort. Kit also includes: Prop nut wrench, stainless cotter pin, brass prop-shaft key. Brass nylock prop nut, waterproof grease, and a rustproof carrying case.

Pro-Pull Tool Only from NATIONAL PRODUCTS
PRO-PULL Kits let you quickly remove 3- and 4-blade propellers from inboard shafts with a 3/4'' to 1 1/8'' diameter. The tool is made of heat-treated steel and features fine-thread screws for tremendous pulling force with very little effort. Kit also includes: Prop nut wrench, stainless cotter pin, brass prop-shaft key. Brass nylock prop nut, waterproof grease, and a rustproof carrying case.

Yanmar 2 or 3 Series Engine, Dual Foot (3.15") Mounting, 70mA, 60-70-SR-IG Alternator from BALMAR
Alternator/regulator/temp sensor packages pre-matched to your engine! Save money and avoid guesswork with a pre-matched combination of high-output alternator, smart multi-stage ARS-5 regulator and temperature sensing module to match your Yanmar, Volvo or Atomic 4 engine. The YP-70 package (for 2- or 3-Series Yanmar engines) features Balmar's Smart Ready internally regulated Model 60-70-SR-IG alternator, advanced ARS-5 regulator with wiring harness and MC-TS-A alternator temperature sensor.

Flex Trim - Black 1/4" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.

Flex Trim - White 1/4" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.

3 Way 4" Speakers from DUAL
5 1/4" Black 3-WAY 100 Watt Indoor/outdoor Loudspeakers, constructed from water resistant materials. 50 watts RMS/ 100 watts max . 4-6 ohms . 100-20,000 Hz . 8-1/4" H x 5-1/4" W x 5-1/4" D . 2. 8 lbs each . Weather resistant ABS enclosure. 4" Polyelite woofer with PVA surround. 40 mm polypropylene cone midrange.

3/4" Bronze Intake Strainer, 2-1/8" Max. Hull Thickness, 3" x 4" Strainer Size from CONBRACO
Discourages air locks in your water-intake lines at high speeds. Keeps water flowing at low speeds and debris out at any speed. Includes integral thru-hull fitting. Marine UL-listed.

Bulkhead Lamp from PERKO
Molded white plastic bulkhead light will accommodate screw socket type bulbs to 40 watts. For systems to 50V. Uses standard household-base 12V bulbs (not included). Dimensions: 4-1/2" x 3-1/4".

Removable Post Bumper, 8-1/2" x 3-1/4" Cross Section from TAYLOR
Portable protection that stays in place better than fenders. Polyester webbing and Delrin buckles permit quick attachment to threatening posts at unprotected and unfamiliar docks. 3'L. Material: Polyester fabric/closed-cell foam . Attachment Method: Polyester webbing, delrin buckles . Cross Section: D-shape . Shock Absorption Mechanism: Foam padding .

AQ-CD-3B - AM/FM/CD/MP3 Multi-Environment Media Center, Black from AQUATABS
Designed for users with multiple digital audio playback requirements with an emphasis on iPod and XM Mini Tuner fexibility in different Audio Zones. Includes the ability to playback CD, MP3 recorded audio/video media. It also incorporates full iPod and XM mini tuner user interface ability and can transmit via RF all user interfaces to up to three compatible fush-mount controllers. Switchable USA/Euro. 18 FM Presets (FM-1, FM-2, FM-3). iPod® UI (User Interface). Dot Matrix Low Heat Read Out.

HS Shaft Seal - 1 1/2" x 3" x 8 1/2" from PSS SHAFT SEAL
.

Shaft Bearing - 2 1/2"ID; 3 1/8"OD; 10"L from MORSE BEARINGS
Rubber-lined naval brass sleeve bearings adapt equally well to strut and stern-tube mounts. External brass shells are machined and polished to provide easy fitting. Specially formulated oil- and chemical-resistant nitrile rubber is securely bonded to the shell. Sleeve bearings are usually installed by light press fitting.

Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.

Flex Trim - White 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.

Prop Puller for Shafts 1" to 1-1/2", 3/4" Min Clearance from NATIONAL PRODUCTS
Removes two-, three-, most four- and and some five-bladed propellers with shafts from 1"–3"dia. Forked-end slips behind the prop hub even when clearance is tight. A recess on the shaft end prevents slippage. High-strength steel.