Top Sellers
|
|
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
Rim Latch Sets - Reverse Bevel with Flush Strike from PERKO
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
|
|
|
CP Zinc Cupboard Catch from PERKO
Chrome-plated zinc. . Supplied with box strike. . Measures: 1 1/2"W x 1 7/8"L . Requires #6 fasteners (not included). Made in USA.
|
Whale Swim 'N' Rinse Transom Shower from WHALE PUMPS
Whale Swim 'N' Rinse Transom Shower Add the convenience of a hot and cold shower to your transom. The easy-to-install shower connects directly to the Whale Quick Connect 15 mm freshwater system. Durable, ABS plastic housing with cover hides the shower when not in use. 7' retracting hose . Water conservation control on the handset . Base plate: 6-1/2" x 11-1/2" . Allow 3-1/2" behind surface .
|
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
|
CP Zinc Sliding Window Stop from PERKO
Chrome-plated zinc with plastic cover on stopping plate. . Base measures 3/4"W x 1 7/8"L. . Requires #8 fasteners (not included). . Stopping plate length: 1 1/2'' . Made in U. S. A.
|
RailLight™ Clamp-On Solar-Powered Light from SIMPLY BRILLIANT
Solar-Powered Sol Lights™ RailLight™ charges all day and shines all night! Clamp this solar-powered portable light to any railing, coaming, stanchion, step, ladder or dock box for up to eight hours of light with just an eight hour charge of sunlight. Coated stainless steel finish resists corrosion. Comes with two clamps: one for round railings up to 1-1/4", and a transom clamp for up to 2" thickness. Dual 700mA rechargeable and replaceable NiCad batteries.
|
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
|
|
2" from CORONA, 1-1, Cobra from SIERRA, Mar from SIERRA
|
|
Home -> Electronics -> Radars -> Radar Accessories->Power Mount & Power Mount Plus Accessories
*Universal mounts fit Furuno, JRC/Northstar, Koden, Lowrance, Sitex, Simrad, Nobeltec, Maptech 12–20" domes and 24" Lowrance domes.
Part No: LTB
|
|
|
|
Home -> Electronics -> Radars -> Radar Accessories->Radar Mast/Pole Mounts & Accessories
This application will fit most radomes and requires some assembly. Choose the top plate that fits your brand of antenna (each top accepts LTB option): Raymarine top plate (Model 5436290) Universal* top plate (Model 5436308) Garmin top plate (Model 6966022) . Choose secondary support: Two 48" stainless-steel struts with brackets and hardware (Model 5436324) One 48" stainless-steel strut and one rail stand-off for 1" rail and mounting hardware (Model 5436316).
Part No: RM-3U-TOP
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars->Spinnaker Sleeve
Recreational sailors can now enjoy spinnaker sailing as it allows one person to hoist a kite on his or her own terms and decide exactly when to let it fly. You’ll never have to “pack” your spinnaker again. With the ATN Spinnaker Sleevee, you can fly the spinnaker, gennaker, MPS, mizzen staysail (any free Luff sail) with ease and confidence. There are three different sizes of ATN Spinnaker Sleeve, which correspond to the boat length and range of luff lengths of the spinnaker (or other sail).
Part No: SS 55
|
|
|
|
Home -> Seating & Covers -> Seating
Comfortable and contemporary flip-up bolster seat is ideal for the sophisticated center console boater. The Tracy Helm Chair features heavy-duty tufted upholstery and a unique flip-up mechanism allows the chair to function as a leaning post. High-gloss finish resists the saltwater environment.
Part No: 40-1045
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs -> Fishing and Specialized Charts->Fishing Hot Spots® Charts
Each Fishing Hot Spots® map is thoroughly researched, the information verified and cartography done digitally, with the most current and accurate GIS tools, to ensure an easy-to-read, accurate and affordable map. It's the map successful anglers have asked for by name for more than two decades. Maps come in a variety of sizes and formats. Each body of water is carefully scrutinized and input is gathered from local experts and consumers as to what needs to be part of the product.
Part No: MD0103
|
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs -> Fishing and Specialized Charts->Fishing Hot Spots® Charts
Each Fishing Hot Spots® map is thoroughly researched, the information verified and cartography done digitally, with the most current and accurate GIS tools, to ensure an easy-to-read, accurate and affordable map. It's the map successful anglers have asked for by name for more than two decades. Maps come in a variety of sizes and formats. Each body of water is carefully scrutinized and input is gathered from local experts and consumers as to what needs to be part of the product.
Part No: MD0102
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs->Waterproof Compact ChartKits
Waterproof, Compact ChartKits with Digital Charts and Software Waterproof Compact ChartKits are made for easy, in-hand use and built to handle the weather. At half the size of the original ChartKit, each title covers approximately one-third the area of a full-size version. These titles are printed on tough, tear-resistant plastic pages that are also totally waterproof. S. titles include FREE Companion Charts for the region which may be downloaded to your PC. Waterproof, tear-resistant pages .
Part No: CCK041-01
|
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs -> Fishing and Specialized Charts->Fishing Hot Spots® Charts
Each Fishing Hot Spots® map is thoroughly researched, the information verified and cartography done digitally, with the most current and accurate GIS tools, to ensure an easy-to-read, accurate and affordable map. It's the map successful anglers have asked for by name for more than two decades. Maps come in a variety of sizes and formats. Each body of water is carefully scrutinized and input is gathered from local experts and consumers as to what needs to be part of the product.
Part No: DE0103
|
|
|
|
Upper Gear Housing Seal Kit.
Part No: 18-2673
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains -> Drive Train Parts
Our distribution centers stock a huge selection of parts so we can deliver the parts you need quickly—even overnight! Our conveniently located stores across the country have the most frequently needed tune-up and repair kits in stock. For help determining the correct parts, or to order the exact replacement parts you need, call our toll-free number 1-800-BOATING (1-800-262-8464), or visit any of our stores. The following pages list our most popular Sierra replacement parts.
Part No: 18-2648
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
Upper Gearcase Dipstick Gasket Replaces OEM #0315189.
Part No: 18-0939
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Freshwater Pumps->Extreme Series & Aqua King Pressure Water Pump Replacement Parts
Extreme Series & Aqua King Pressure Water Pump Replacement Parts.
Part No: 94-706-01
|
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Freshwater Pumps->Extreme Series & Aqua King Pressure Water Pump Replacement Parts
Extreme Series & Aqua King Pressure Water Pump Replacement Parts.
Part No: 94-670-01
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools->Light Assemblies for Navigator Bulkhead-Mount Compass
Light Assemblies ONLY for Navigator Bulkhead-Mount Compass.
Part No: NV-0045XSP
|
|
|
|
Home -> Plumbing -> Fittings & Valves->ARG-Series Strainer Parts & Repair Kits
ARG-Series Strainer Parts & Repair Kits Baskets: Stainless steel or nylon. Sight glass.
Part No: 2-238
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->ARG-Series Strainer Parts & Repair Kits
ARG-Series Strainer Parts & Repair Kits Baskets: Stainless steel or nylon. Sight glass.
Part No: 2-228
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Medium-Duty Pintles
Typical installations use one with a short pin and one with a long pin. Pin diameter: 1/2". All require #10 RHMS.
Part No: 80-56
|
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Medium-Duty Pintles
Typical installations use one with a short pin and one with a long pin. Pin diameter: 1/2". All require #10 RHMS.
Part No: 80-46
|
|
|
|
Home -> Engine Systems -> Engine Parts
Replacement for Mercury/Mariner Outboard #46-60366A1.
Part No: 18-3507
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
For 100-245 Stringer Unit (1968-72) Replaces 981799 Contains: One (1) Upper Gearcase Gasket (18-0939) - OE #315189. Four (4) Oil Seals (18-2073) - OE #981268. One (1) Rubber Seal (18-3111) - OE #907774. Two (2) Washers (18-4248) - OE #311598. Four (4) O-Rings (18-7103) - OE #308624. One (1) O-ring (18-7107) - OE #313175. One (1) O-Ring (18-7121) - OE #308621. One (1) O-Ring (18-7134) - OE #303059. One (1) O-Ring (18-7146) - OE #554545. Two (2) O-Rings (18-7198) - OE #308626.
Part No: 18-2666
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting
Controls ON-OFF and light rotation speed. Provides optimum voltage for brightest performance. Can perform up to six different duties; controls searchlights, winches, and other devices. 12/24V, for RCL-50/100 Series. Includes 8-ea. in-line connectors, but no coaxial cable. 2. 8" x 3. 0" x 1. 6". Application: XRCiZ rotates and moves light assembly every 30 days, keeping bearing surfaces free of corrosion .
Part No: 1927.3
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Repair and Service Kits, Spare Parts
Parts service and repair kits for Whale Water Systems Units.
Part No: AK9003
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->Urethane Bristle Brushes
Chisel-formed all-natural china bristle Nickel-plated ferrules.
Part No: 3052112
|
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->Urethane Bristle Brushes
Chisel-formed all-natural china bristle Nickel-plated ferrules.
Part No: 305225
|
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->Urethane Bristle Brushes
Chisel-formed all-natural china bristle Nickel-plated ferrules.
Part No: 30522
|
|
|
|
Home -> Sailboat -> Tiller & Rudder->Aluminum Battlestick Tiller Extension Accessories
Accessories for Aluminum Battlestick Tiller Extensions.
Part No: RF3133
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting
Provides a 2nd station switch. Includes two-way splitter 15’ coax cable and four F type connectors. Three mounting options: surface mount (cutout: 2 3/4" x 3 5/8" x 1 3/8"). flush mount (2 3/4" x 3 3/4" x 1/2") .
Part No: 9282.3
|
|
|
|
Home -> Interior, Flags & Gifts -> Flags & Staffs -> U.S./Yacht Ensign Flags->U.S. Flags
Hoist 'em high and proud! Durable nylon flags are made for marine use. Sewn flags feature embroidered or sewn stars and double-stitched stripes for added strength. Made in the U. S. A. The rule for sizing ensigns and yacht ensigns is one inch of length (of the fly) for every foot of boat length, flown on a staff that is twice as high as the hoist of the flag.
Part No: 921
|
|
|
|
|
Home -> Interior, Flags & Gifts -> Flags & Staffs -> U.S./Yacht Ensign Flags->U.S. Flags
Hoist 'em high and proud! Durable nylon flags are made for marine use. Sewn flags feature embroidered or sewn stars and double-stitched stripes for added strength. Made in the U. S. A. The rule for sizing ensigns and yacht ensigns is one inch of length (of the fly) for every foot of boat length, flown on a staff that is twice as high as the hoist of the flag.
Part No: 8436
|
|
|
|
Dive rated to 200m. Watches feature precise quartz motion and rotating dive bezel. Glow-in-the-dark hour marks and watch hands help you read in low-light situations. On the two stainless-steel watches, the date is displayed on the right of the face with a special magnified mineral lens. Available in three face styles: Red U. S. Marine Corps insignia with eagle and globe Blue U. S. Navy insignia with eagle and galleon Black U. S.
Part No: 50444
|
|
|
