Top Sellers
Calibrated Resin Pump Set from MAS EPOXY
For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers.
|
Cetol Marine Light - Quart from INTERLUX
Enhances and protects the natural beauty of interior and exterior woodSemi-transparent finish prevents weathering and repels water. just wash wood thoroughly and apply. Three coats are recommended for the first application, followed by annual touchups. Marine Light is more translucent than Marine. If a gloss finish is desired, either may be overcoated with Marine Gloss. Quart. Long-lasting adhesion and protection from UV rays and weathering. Flexible, breathable, translucent finish; Quarts.
|
Micron CSC Antifouling Paint, Red, Quart from INTERLUX
Haul and relaunch without loss of performance The innovative copper-copolymer formula of Micron CSC provides a controlled release of antifouling biocide at the paint surface, which means that the longevity of the coating is related to the amount of paint applied. Can be applied over most paints in good condition. Micron CSC will not lose its effectiveness when hauled out of the water for extended periods of time (such as winter storage). Type: Copolymer . 2% Cuprous Oxide . Additives: None .
|
Brightside Pre-Kote Primer - Gray, Quart from INTERLUX
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.
|
Chris Craft Stain #573 - Pint from INTERLUX
Chris Craft Stain - Pint Fills grain while staining wood, reducing the number of coats of varnish needed. May also be used on bare mahogany planking before applying primer or sanding surfacer.
|
Adaptor Fitting for Suzuki & Honda Lower Units from WEST MARINE
Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefisher lower units Fits standard quart plastic bottles. Flexible hose gets to hard-to-reach fill plugs.
|
Fiberglass Cleaner and Wax - Quart from SEAPOWER MARINE PROD
Cleans and waxes in one easy stepCleans, waxes, seals and protects the fiberglass surface. Contains the finest Carnauba waxes and silicones and removes surface oxidation, residue, dock marks, grease and dirt while leaving behind a durable high-gloss finish. Excellent for hand or machine use. Quart.
|
Nauta 9 Gallon Flexible Fuel Tank from IMTRA CORPORATION
Flexible gasoline tanks won't rust, don't rattle, are easy to tie down, easy to carry, and won't scrape your boat. The Nauta 9-Gallon flexible fuel tank features comfortable, molded carrying handles and rugged 840-denier nylon construction. Fitted with a 1 1/2'' pivoting fill and a capped and 1/4'' NPT hose barb. Measures 28 1/2'' x 17 1/2'' x 6 1/2''.
|
Orpine Boat Soap, Quart from ORPIN
Fresh pine scent!Replaces musty mildew odors with a pleasant fresh pine scent. Just one ounce in three gallons of fresh or saltwater will clean a 45'L boat. Biodegradable. Biodegradable.
|
Teak Care - Brightener, Quart from STARBRITE
Clean, brighten and protect your teak in three easy stepsBeautiful teak in three easy steps! Kit contains three pint-sized bottles, one each of Cleaner to remove stains and weathering; Brightener to highlight the natural grain and enhance color; and Oil to seal and protect wood from weather and UV damage. Individual, quart-sized bottles are also available. Cleaner chemically roots out stains, including ugly black mildew stains. Brightener restores teak's lustrous hue.
|
Fiberglass Boat Cleaner 920 1/2 Gallon from COLLINITE
Removes rust, exhaust, oil, grease, and oxidation stains from fiberglass. Restores the original color quickly without hard rubbing or buffing, leaves a chemically clean surface to which waxes can bond. Use with fiberglass boat wax or heavy-duty paste Fleetwax . Made in U. S. A.
|
High Gloss Gelcoat Compound Gallon from 3M PRODUCTS
Leaves a high gloss finish without wheel or swirl marksRemove fine scratches from production gel coat. Unique formulation reduces slinging while buffing and leaves a high gloss finish without wheel or swirl marks. Contains no wax or silicone.
|
|
|
Methyl Ethyl Ketone Solvent - Quart from KLEAN STRIP
A strong cleanup solvent—very effective for epoxiesMEK has characteristics similar to acetone, but is 30% slower evaporating.
|
Star Brite Instant Hull Cleaner, Gallon from STARBRITE
Formulated extra strong to get the job doneSimply spray or wipe on. Removes scum, algae and rust stains from fiberglass, metal and painted surfaces without rubbing. Extremely strong cleaner, avoid contact with galvanized metal. Removes scum, algae and rust stains. For use on fiberglass, metal and painted surfaces. Avoid contact with galvanized metal.
|
|
Quart from INTERLUX, Gallon from INTERLUX
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
850
860
870
880
890
900
910
920
930
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
980
990
1,000
1,010
1,020
1,030
1,040
1,050
1,100
1,200
1,260
|
|
|
Home -> Fishing -> Trolling Motors -> Trolling Motors, Stern->Varimax Great White Digital Saltwater Series
Anglers will be quick to recognize the rugged functional styling of the VariMAX highlighted by the intuitive push/pull, forward and reverse speed adjustments. The BluVis Function Display shows direction (forward/reverse), precise speed settings, and 10 levels of battery voltage when turned off. Fish 3. 5 times longer, fish at exactly the speed you want, and fish more quietly. Perfect for all-day fishing expeditions, VariMAX delivers over 3-times the battery life of traditional 5-speed motors.
Part No: 966180830
|
|
|
|
Home -> Fishing -> Trolling Motors -> Trolling Motors, Stern->Varimax Great White Digital Saltwater Series
Anglers will be quick to recognize the rugged functional styling of the VariMAX highlighted by the intuitive push/pull, forward and reverse speed adjustments. The BluVis Function Display shows direction (forward/reverse), precise speed settings, and 10 levels of battery voltage when turned off. Fish 3. 5 times longer, fish at exactly the speed you want, and fish more quietly. Perfect for all-day fishing expeditions, VariMAX delivers over 3-times the battery life of traditional 5-speed motors.
Part No: 966180840
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Barrier Coats
Excellent for use under VC17m and VC17m Extra This epoxy stops moisture from penetrating gel coat, wood or other porous surfaces. Whether sprayed (air or airless), rolled or brushed, the self-leveling characteristics provide a super-smooth surface for subsequent bottom paints. It can be applied at temperatures as low as 40°F, dries quickly and requires no sanding between coats, making it a great system for the do-it-yourself owner. 0 mils dry, 3. 1 mils wet . Drying Time: To touch: 2 to 6 hrs.
Part No: YEA729KIT/L
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->VC® 17m Extra with Biolux™
Teflon® additive reduces hull friction and drag and increases performance VC17m Extra’s thin film yields a super smooth racing finish that would normally take days of tiresome sanding. Now that’s easy! VC17m Extra contains metallic copper and Biolux Slime blocking technology to protect your boat from zebra mussels, teredo worms, weed, algae and slime fouling. Recommended Usage: Inland lakes, low fouling salt water areas; trailerables, dry-stored, racing boats; fiberglass, wood and steel hulls .
Part No: YBA406KIT/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->VC® 17m Extra with Biolux™
Teflon® additive reduces hull friction and drag and increases performance VC17m Extra’s thin film yields a super smooth racing finish that would normally take days of tiresome sanding. Now that’s easy! VC17m Extra contains metallic copper and Biolux Slime blocking technology to protect your boat from zebra mussels, teredo worms, weed, algae and slime fouling. Recommended Usage: Inland lakes, low fouling salt water areas; trailerables, dry-stored, racing boats; fiberglass, wood and steel hulls .
Part No: YBA405KIT/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->VC® 17m Extra with Biolux™
Teflon® additive reduces hull friction and drag and increases performance VC17m Extra’s thin film yields a super smooth racing finish that would normally take days of tiresome sanding. Now that’s easy! VC17m Extra contains metallic copper and Biolux Slime blocking technology to protect your boat from zebra mussels, teredo worms, weed, algae and slime fouling. Recommended Usage: Inland lakes, low fouling salt water areas; trailerables, dry-stored, racing boats; fiberglass, wood and steel hulls .
Part No: YBA407KIT/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents
Formulated for use with VC 17M Specially formulated as a thinner and equipment cleaner for VC 17m. Will also re-dissolve any VC 17m, VC 18, or VC liquid Speed that has dried in the roller tray. DO NOT USE with VC Tar, VC Tar2, VC Performance Epoxy or VC Underwater Epoxy.
Part No: V172/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->VC-Offshore Antifouling Bottom Paint
Used by performance boatsVC Offshore combines superior antifouling performance with a super smooth low friction surface for the performance conscious boater. This high-strength, vinyl antifouling paint, fortified with Teflon® yields a hard, very smooth finish for maximum durability, reduced friction and increased performance. High copper loading fights fouling on performance boats in saltwater. Can be used in fresh, salt and brackish waters. Should not be applied over non-vinyl bottom paints.
Part No: R3950/1
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->VC-Offshore Antifouling Bottom Paint
Used by performance boatsVC Offshore combines superior antifouling performance with a super smooth low friction surface for the performance conscious boater. This high-strength, vinyl antifouling paint, fortified with Teflon® yields a hard, very smooth finish for maximum durability, reduced friction and increased performance. High copper loading fights fouling on performance boats in saltwater. Can be used in fresh, salt and brackish waters. Should not be applied over non-vinyl bottom paints.
Part No: V118/1
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->VC-Offshore Antifouling Bottom Paint
Used by performance boatsVC Offshore combines superior antifouling performance with a super smooth low friction surface for the performance conscious boater. This high-strength, vinyl antifouling paint, fortified with Teflon® yields a hard, very smooth finish for maximum durability, reduced friction and increased performance. High copper loading fights fouling on performance boats in saltwater. Can be used in fresh, salt and brackish waters. Should not be applied over non-vinyl bottom paints.
Part No: V116/1
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->VC-Offshore Antifouling Bottom Paint
Used by performance boatsVC Offshore combines superior antifouling performance with a super smooth low friction surface for the performance conscious boater. This high-strength, vinyl antifouling paint, fortified with Teflon® yields a hard, very smooth finish for maximum durability, reduced friction and increased performance. High copper loading fights fouling on performance boats in saltwater. Can be used in fresh, salt and brackish waters. Should not be applied over non-vinyl bottom paints.
Part No: V117/1
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->VC Performance Epoxy with Teflon®
Teflon® adds lubricity and eases wet sanding and burnishing. VC Performance Epoxy's hard, stain-resistant finish is also ideal for rack-stored and trailered boats or boats that are kept in the water not requiring antifouling protection. VC Performance Epoxy has no antifouling or foul release properties. Recommended Usage: Dry-stored or trailerable boats; gel coat, epoxy, or metal hulls; racing boats . Additives: Teflon® . Number of Coats Recommended: Three/four, as needed . Coverage: 50sq.
Part No: V127KIT/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Bottom Paint & Coatings->VC Performance Epoxy with Teflon®
Teflon® adds lubricity and eases wet sanding and burnishing. VC Performance Epoxy's hard, stain-resistant finish is also ideal for rack-stored and trailered boats or boats that are kept in the water not requiring antifouling protection. VC Performance Epoxy has no antifouling or foul release properties. Recommended Usage: Dry-stored or trailerable boats; gel coat, epoxy, or metal hulls; racing boats . Additives: Teflon® . Number of Coats Recommended: Three/four, as needed . Coverage: 50sq.
Part No: V127KIT/2
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil
Teflon® additive reduces hull friction and drag and increases performance VC17m Extra’s thin film yields a super smooth racing finish that would normally take days of tiresome sanding. Now that’s easy! VC17m Extra contains metallic copper and Biolux Slime blocking technology to protect your boat from zebra mussels, teredo worms, weed, algae and slime fouling. Recommended Usage: Inland lakes, low fouling salt water areas; trailerables, dry-stored, racing boats; fiberglass, wood and steel hulls .
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil
Teflon® additive reduces hull friction and drag and increases performance VC17m Extra’s thin film yields a super smooth racing finish that would normally take days of tiresome sanding. Now that’s easy! VC17m Extra contains metallic copper and Biolux Slime blocking technology to protect your boat from zebra mussels, teredo worms, weed, algae and slime fouling. Recommended Usage: Inland lakes, low fouling salt water areas; trailerables, dry-stored, racing boats; fiberglass, wood and steel hulls .
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil
Teflon® additive reduces hull friction and drag and increases performance VC17m Extra’s thin film yields a super smooth racing finish that would normally take days of tiresome sanding. Now that’s easy! VC17m Extra contains metallic copper and Biolux Slime blocking technology to protect your boat from zebra mussels, teredo worms, weed, algae and slime fouling. Recommended Usage: Inland lakes, low fouling salt water areas; trailerables, dry-stored, racing boats; fiberglass, wood and steel hulls .
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil
Teflon® additive reduces hull friction and drag and increases performance VC17m Extra’s thin film yields a super smooth racing finish that would normally take days of tiresome sanding. Now that’s easy! VC17m Extra contains metallic copper and Biolux Slime blocking technology to protect your boat from zebra mussels, teredo worms, weed, algae and slime fouling. Recommended Usage: Inland lakes, low fouling salt water areas; trailerables, dry-stored, racing boats; fiberglass, wood and steel hulls .
|
|
|
|
Home -> Electronics -> Global Positioning Systems->BlueChart g2 Vision, Canada West, SD Card
All the new Garmin plotters feature a worldwide basemap that, when optional Vision cards are added, offers the high-detail charting of BlueChart g2, plus high-resolution satellite imagery, above and below the water 3D perspective, auto guidance technology, aerial photographs for real-world reference and coastal roads with points of interest. Enhanced details include: High-resolution satellite imagery, when overlaid on the chart, offers unparalleled situational awareness.
Part No: 010-C0700-00
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers
Our most affordable ice box conversion systems! Cooling volumes up to approx. 2. 8 cu. ft. with 2” of insulation/3. 5 cu. ft. with 3” of insulation. Dimensions: 11. 8”L (300 mm) x 9. 65”W (245mm) x 3.
Part No: VD-01
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers
Our most affordable ice box conversion systems! Cooling volumes up to approx. 1 cu. ft. with 2” of insulation/1. 75 cu. ft. with 3” of insulation. Dimensions: 10. 82”L (275 mm) x 8. 46”W (215mm). Weight: approx.
Part No: VD-02
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers
Cooling volumes up to approx. 4. 5 cu. ft. with 2” of insulation/6 cu. ft. with 3” of insulation. Dimensions: 14. 76”L (375 mm) x 10. 03”W (255 mm) x 3. 9"D (100 mm).
Part No: VD-04
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers -> Refrigeration Conversion
Cooling volumes up to approx. 4. 5 cu. ft. with 2” of insulation/6 cu. ft. with 3” of insulation. Dimensions: 14. 76”L (375 mm) x 13. 77”W (350mm) x 1” Thick (25mm). Weight: approx.
Part No: VD-05
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers
Our most affordable ice box conversion systems! Cooling volumes up to approx. 3. 5 cu. ft. with 2" of insulation/4. 5 cu. ft. with 3" of insulation. Provides a freezer compartment for ice making. Dimensions: 10. 03"L (255mm) x 8.
Part No: VD-07
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers
Cooling volumes up to approx. 5. 6 cu. ft. with 2” of insulation/6. 3 cu. ft. with 3” of insulation. Dimensions: 17. 71”L (450 mm) x 10. 63”W (270mm) x 16.
Part No: VD-08
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers
Especially well suited for use in high ambient temperatures and for large volume boxes. Cooling volumes up to approx. 7 cu. ft. with 2” of insulation/8. 9 cu. ft. with 3” of insulation. High-performance forced air evaporator with fan. Dimensions: 8. 66”L (220 mm) x 10.
Part No: VD-15
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers
For top-loading iceboxes Cooling volumes up to approx. 9 cu. ft. with 3” of insulation Dimensions: 10” L x 6” W x 11” H Weight: approx. 4lb.
Part No: VD-150
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers->Waeco Horizontal Evaporators
For front-loading iceboxes Cooling volumes up to approx. 9 cu. ft. with 3” of insulation Dimensions: 10” L x 6” W x 11” H Weight: approx. 4lb.
Part No: VD-151
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers
Cooling volumes up to approx. 15 cu. ft. with 3” of insulation Dimensions: 15” L x 12” W x 6” D Weight: approx. 5lb.
Part No: VD-152
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers->Waeco Horizontal Evaporators
For front-loading iceboxes Cooling volumes up to approx. 9 cu. ft. with 3” of insulation Dimensions: 10” L x 6” W x 11” H Weight: approx. 4lb.
Part No: VD-153
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers
Suitable for a medium to small sized freezer, this power plate evaporator has a cooling capacity of a 6cu. ft. freezer with 4" of insulation. Includes 15' of copper tubeset thermostat assembly and an installation kit. 11. 25"H x 19"L x 1.
Part No: VD-160
|
|
|