Top Sellers
Spring Loaded Ring Pull, Square 2 x 2 3/8" from WEST MARINE
Spring-loaded ring immediately returns to flush when released. Type 304 stainless steel . Size: 2 x 2 3/8" .
|
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
|
|
Shower/Mixer Faucet Combo from SHURFLO
This shower mixer has a water conservation button built-in to the handle. Chrome-plated with an easy grip handle, ceramic disc valves and 72" retractable hose. Includes flexible 1/2" NPT connection hoses for easy installation. Material: Brass . Dimensions: 6"H x 6-3/8"W x 7-1/4"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" . Cutout Size: 2-1/2". Manufacturer's Documents Installation Guidelines.
|
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
Off/1/All/2 Battery Switch, 380 Continuous Amps, 850 Intermittent Amps from PERKO
For high-amperage applications like diesel engine starters, large inverters and windlasses. Reinforced polycarbonate body, 1/2"dia. brass terminal connections and an alternator field disconnect. Alt. Field Disc. : Yes . Switch Material: Reinforced Polycarbonate. Terminal Material/Size: Brass 1/2"dia. . Switch Dimensions: 5-1/4"sq. x 3-3/8"H .
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
|
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
5/16" Wire Rope Clamp from SEADOG
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.
|
|
1, 1-1, from RONSTAN, 16"-1, 2-1, 8"H from WORTHINGTON, 5" OD from WORTHINGTON
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Ports->Rectangular Ports
Laminated safety glass. Hinges contain adjusting screws for gasket compression. Flange and finish ring drilled for wood screws (not meant to be bolted together). Spigots are sloped for drainage. Includes fitted bug screen. Cutout radius: 1-1/4". Latches: Bronze dogs and studs (bronze ports) or bronze stud with black bakelite knob (stainless ports). Hinges: Non-locking, 180° . Material: Highly polished bronze or 304 stainless steel. Included Accessories: Fitted bug screen .
Part No: 132112
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Snap Shackles->Fixed Bail Snap Shackles
Economy shackles for use where you don’t need them to swivel. Stainless models are 15-5PH. Bronze models are forged with stainless pins. NOTE: Functional load is the point at which snap shackles distort beyond usability but before they break.
Part No: RF6002
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Fixed Bail Snap Shackles
Economy shackles for use where you don’t need them to swivel. Stainless models are 15-5PH. Bronze models are forged with stainless pins. NOTE: Functional load is the point at which snap shackles distort beyond usability but before they break.
Part No: RF6000
|
|
|
|
Home -> Electronics -> Fishfinders -> Transducers and Accessories->Sonar Accessories
Included are: New Portable Transducers: mount on the transom or side of almost any wood, aluminum, or fiberglass boat and are for use at trolling speeds only New Trolling Motor Mount Transducers: designed to mount on to the body of most trolling motors AD-STM Trolling Motor Adaptor: Adapter hardware for attaching high speed sensor to trolling motor Other Thru-hull and transom mount transducers and hardware kits Temperature and speed sensors Transducer switches.
Part No: 710166-1
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Cast Bronze Threaded Nipples, NPT
Bronze plumbing fittings.
Part No: PN-1500
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Cast Bronze Threaded Nipples, NPT
Bronze plumbing fittings.
Part No: PN-1250
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Cast Bronze Threaded Nipples, NPT
Bronze plumbing fittings.
Part No: PN-1000
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Cast Bronze Threaded Nipples, NPT
Bronze plumbing fittings.
Part No: PN-500
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Cast Bronze Threaded Nipples, NPT
Bronze plumbing fittings.
Part No: PN-2000
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Cast Bronze Threaded Nipples, NPT
Bronze plumbing fittings.
Part No: PN-750
|
|
|
|
Chrome-plated or plain bronze body with 316 stainless fittings. Working load should not exceed 40% of tensile strength.
Part No: 12TFBJB
|
|
|
|
|
Chrome-plated or plain bronze body with 316 stainless fittings. Working load should not exceed 40% of tensile strength.
Part No: 38TFBJB
|
|
|
|
|
Chrome-plated or plain bronze body with 316 stainless fittings. Working load should not exceed 40% of tensile strength.
Part No: 14TFBJB
|
|
|
|
|
Chrome-plated or plain bronze body with 316 stainless fittings. Working load should not exceed 40% of tensile strength.
Part No: 58TFBJB
|
|
|
|
|
Chrome-plated or plain bronze body with 316 stainless fittings. Working load should not exceed 40% of tensile strength.
Part No: 516TFBJB
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Bronze Wool Pads, Fine
The advantages of steel wool without the rustUse in place of steel wool. (Unlike steel wool, bronze wool will not leave particles behind that turn to rust and stain your boat!) Three-pack.
Part No: 35010
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Bronze Wool Pads, Fine
The advantages of steel wool without the rustUse in place of steel wool. (Unlike steel wool, bronze wool will not leave particles behind that turn to rust and stain your boat!) Three-pack.
Part No: 35000
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Bronze Wool Pads, Fine
The advantages of steel wool without the rustUse in place of steel wool. (Unlike steel wool, bronze wool will not leave particles behind that turn to rust and stain your boat!) Three-pack.
Part No: 35005
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Anchor Rollers
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
Part No: 66840064
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils
**Brush-Power Trim|**Brush-Power Trim.
Part No: 18-6255
|
|
|
|
Stylish, brushed aluminum rod storage racks feature slotted rod holders to lock in reels for safe, secure transport. Each holder is 12" long, with a 1. 9" dia.
Part No: F31-3003BSA-1
|
|
|
|
|
Stylish, brushed aluminum rod storage racks feature slotted rod holders to lock in reels for safe, secure transport. Each holder is 12" long, with a 1. 9" dia.
Part No: F31-3004BSA-1
|
|
|
|
Home -> Cabin & Galley -> Stoves & Propane System -> Propane Systems->Rust-Free Aluminum LPG Gas Cylinders
High-strength, marine alloy construction. Contains the new Overfill Protection Device to assure expansion room for temperature changes. Lightweight and maintenance-free. New external QCV thread on valve allows use with appliances which use this new connector.
Part No: 299889
|
|
|
|
|
Home -> Cabin & Galley -> Stoves & Propane System -> Propane Systems->Rust-Free Aluminum LPG Gas Cylinders
High-strength, marine alloy construction. Contains the new Overfill Protection Device to assure expansion room for temperature changes. Lightweight and maintenance-free. New external QCV thread on valve allows use with appliances which use this new connector.
Part No: 299891
|
|
|
|
|
Home -> Cabin & Galley -> Stoves & Propane System -> Propane Systems->Rust-Free Aluminum LPG Gas Cylinders
High-strength, marine alloy construction. Contains the new Overfill Protection Device to assure expansion room for temperature changes. Lightweight and maintenance-free. New external QCV thread on valve allows use with appliances which use this new connector.
Part No: 299474
|
|
|
|
|
Home -> Cabin & Galley -> Stoves & Propane System -> Propane Systems->Rust-Free Aluminum LPG Gas Cylinders
High-strength, marine alloy construction. Contains the new Overfill Protection Device to assure expansion room for temperature changes. Lightweight and maintenance-free. New external QCV thread on valve allows use with appliances which use this new connector.
Part No: 299473
|
|
|
|
|
Home -> Cabin & Galley -> Stoves & Propane System -> Propane Systems->Rust-Free Aluminum LPG Gas Cylinders
High-strength, marine alloy construction. Contains the new Overfill Protection Device to assure expansion room for temperature changes. Lightweight and maintenance-free. New external QCV thread on valve allows use with appliances which use this new connector.
Part No: 299494
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents
A slow drying solvent to ease brushing and facilitate the flow of specified paint coatings. It is recommended in various topside systems for removing sanding residue from fiberglass and wood surfaces.
Part No: Y333/QTCA
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**BrushSet-Starter|**BrushSet-Starter.
Part No: 18-5717
|
|
|
|
Home -> Fishing -> Fishing Accessories -> Fishing Belts
Used alone—or with its matching harness—the Brute Buster offers exceptional comfort and support for anglers in the 50-100 lb. line class.
Part No: 30900
|
|
|
