Top Sellers
2-5/8" x 1-1/2" Euro Utility Hinge from WEST MARINE
Stamped utility hinge with 1/2" offset from TACO. Made of marine grade 304 stainless steel with polished finish, non-corrosive utility hinge is ideal for hatches, cabinets, and doors inside and outside the boat. Measures 2-5/8" x 1-1/2" x .
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
110V AC Automatic Bilge Pump from RULE INDUSTRIES
The 1800gph pumping capacity and extra-long 24' power cord make this pump great for boats with shore power or protecting basements from flooding during wet weather. Motor and durable housing will last for years on the boat or in the home. 5/8" garden hose adapter. gph: 1800. Draw: 1. 1A@110V AC. Built-In Switch: Yes. Material: Plastic. Dimensions: 7-3/4" x 4-3/4". Port Size: 1-1/8".
|
|
|
5/16" Wire Rope Clamp from SEADOG
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.
|
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
Teak Plugs - 3/8" from SEAFIT
Use these teak plugs to cover screw heads or fill small holes for a beautiful smooth finish to your installation. Sizes: 1/4" 5/8" 5/16" 3/8" 1/2" 1".
|
Ring Style Car RC-125 from FORESPAR
Separates the up/down and side-to-side motions of the pole to make a bind-free, strong attachment. Shackles are supplied for uphaul/downhaul lines. Stainless steel cheeks, aluminum body and plastic liners. Ring Style Car RC-125 Although a screw-pin stop is supplied, this car is designed to be used with uphaul/downhaul blocks shackled to the bails at each end. Ring ID: 1 5/8". Investment cast stainless steel with plastic liners to reduce friction. Fits UXP and UTR pole end fittings.
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Vertical Hand Pump Faucet, Chrome Over Brass from FYNSPRAY
Fynspray Vertical Hand Pump Faucet Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. Chrome over brass. 1"diameter tube . Fits 1/2"–5/8" hose .
|
Telescopic Tiller Extension 29" - 48" from RONSTAN
Ronstan tiller extensions feature fluted anodized aluminum tubing for durability and rigidity and a tapered, non-slip Hyperlon grip with ball end. The Urethane universal joint can be removed without tools. Adjustable-length versions feature a fast-action adjustable shaft for additional versatility. 4732913 Aluminum Fixed 24” RF3128 5/8"Tubing Dia. , 1"Grip Dia. , 24"L, 5. 3Lbs. 1133131 Lightweight Aluminum 33” RF3129 5/8"Tubing Dia. , 1"Grip Dia.
|
Gusher MKIII Cabinet-Mount Foot Pump, Right-Handed from WHALE PUMPS
This surface-mounted pump can be placed inside or outside a locker. Discharges on each stroke and self-primes (to 7' max. height). Offered in “Right” and “Left” configurations to suit installation clearance requirements. For freshwater or saltwater. gpm: 4. 3 . Dimensions: 5-1/8"H x 5"W x 3-5/8"L (excludes 4-1/8" foot pedal) .
|
Brass-Bristle Brush from SEAFIT
Solid brass bristles won't rust or corrodeLarge, plastic utility brush has solid brass bristles that won’t rust or corrode. Brass bristles are slightly softer than stainless steel and are therefore less intrusive to surfaces. Molded plastic handle provides solid, controlled grip. Bristles: 5/8"D. Overall length: 8 1/2". Molded plastic handle provides solid, controlled grip. 5/8"L bristles.
|
Rim Latch Sets - Reverse Bevel with Flush Strike from PERKO
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
|
|
5, 8"H from WORTHINGTON, 5" OD from WORTHINGTON, 1, 2OD from WORTHINGTON
|
|
Home -> Plumbing -> Fittings & Valves->Cast Bronze Threaded Nipples, NPT
Bronze plumbing fittings.
Part No: PN-1000
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Cast Bronze Threaded Nipples, NPT
Bronze plumbing fittings.
Part No: PN-500
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Cast Bronze Threaded Nipples, NPT
Bronze plumbing fittings.
Part No: PN-2000
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Cast Bronze Threaded Nipples, NPT
Bronze plumbing fittings.
Part No: PN-750
|
|
|
|
Chrome-plated or plain bronze body with 316 stainless fittings. Working load should not exceed 40% of tensile strength.
Part No: 12TFBJB
|
|
|
|
Chrome-plated or plain bronze body with 316 stainless fittings. Working load should not exceed 40% of tensile strength.
Part No: 38TFBJB
|
|
|
|
Chrome-plated or plain bronze body with 316 stainless fittings. Working load should not exceed 40% of tensile strength.
Part No: 14TFBJB
|
|
|
|
Chrome-plated or plain bronze body with 316 stainless fittings. Working load should not exceed 40% of tensile strength.
Part No: 58TFBJB
|
|
|
|
Chrome-plated or plain bronze body with 316 stainless fittings. Working load should not exceed 40% of tensile strength.
Part No: 516TFBJB
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Bronze Wool Pads, Fine
The advantages of steel wool without the rustUse in place of steel wool. (Unlike steel wool, bronze wool will not leave particles behind that turn to rust and stain your boat!) Three-pack.
Part No: 35010
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Bronze Wool Pads, Fine
The advantages of steel wool without the rustUse in place of steel wool. (Unlike steel wool, bronze wool will not leave particles behind that turn to rust and stain your boat!) Three-pack.
Part No: 35000
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Bronze Wool Pads, Fine
The advantages of steel wool without the rustUse in place of steel wool. (Unlike steel wool, bronze wool will not leave particles behind that turn to rust and stain your boat!) Three-pack.
Part No: 35005
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Anchor Rollers
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
Part No: 66840064
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils -> Power Tilt/Trim
**Brush-Power Trim|**Brush-Power Trim.
Part No: 18-6255
|
|
|
|
Stylish, brushed aluminum rod storage racks feature slotted rod holders to lock in reels for safe, secure transport. Each holder is 12" long, with a 1. 9" dia.
Part No: F31-3003BSA-1
|
|
|
|
Stylish, brushed aluminum rod storage racks feature slotted rod holders to lock in reels for safe, secure transport. Each holder is 12" long, with a 1. 9" dia.
Part No: F31-3004BSA-1
|
|
|
|
Home -> Cabin & Galley -> Stoves & Propane System->Rust-Free Aluminum LPG Gas Cylinders
High-strength, marine alloy construction. Contains the new Overfill Protection Device to assure expansion room for temperature changes. Lightweight and maintenance-free. New external QCV thread on valve allows use with appliances which use this new connector.
Part No: 299889
|
|
|
|
Home -> Cabin & Galley -> Stoves & Propane System->Rust-Free Aluminum LPG Gas Cylinders
High-strength, marine alloy construction. Contains the new Overfill Protection Device to assure expansion room for temperature changes. Lightweight and maintenance-free. New external QCV thread on valve allows use with appliances which use this new connector.
Part No: 299891
|
|
|
|
Home -> Cabin & Galley -> Stoves & Propane System->Rust-Free Aluminum LPG Gas Cylinders
High-strength, marine alloy construction. Contains the new Overfill Protection Device to assure expansion room for temperature changes. Lightweight and maintenance-free. New external QCV thread on valve allows use with appliances which use this new connector.
Part No: 299474
|
|
|
|
Home -> Cabin & Galley -> Stoves & Propane System->Rust-Free Aluminum LPG Gas Cylinders
High-strength, marine alloy construction. Contains the new Overfill Protection Device to assure expansion room for temperature changes. Lightweight and maintenance-free. New external QCV thread on valve allows use with appliances which use this new connector.
Part No: 299473
|
|
|
|
Home -> Cabin & Galley -> Stoves & Propane System->Rust-Free Aluminum LPG Gas Cylinders
High-strength, marine alloy construction. Contains the new Overfill Protection Device to assure expansion room for temperature changes. Lightweight and maintenance-free. New external QCV thread on valve allows use with appliances which use this new connector.
Part No: 299494
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents
A slow drying solvent to ease brushing and facilitate the flow of specified paint coatings. It is recommended in various topside systems for removing sanding residue from fiberglass and wood surfaces.
Part No: Y333/QTCA
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts
**BrushSet-Starter|**BrushSet-Starter.
Part No: 18-5717
|
|
|
|
Home -> Fishing -> Fishing Accessories
Used alone—or with its matching harness—the Brute Buster offers exceptional comfort and support for anglers in the 50-100 lb. line class.
Part No: 30900
|
|
|
|
Home -> Fishing -> Fishing Accessories->Brute Buster Harness™
Standing up, or sitting down, the Brute Buster Harness from Braid offers rugged, adjustable support when fighting gamefish in the 50-100 lb. Durable ballistic nylon, over a rugged plastic frame, disperses pressure over a wide area of the mid and lower back, to lessen strain and increase power. Easily adjusted on each side. Wide support area reduces strain on back. Made of the highest quality components to stand the rigors of true big game fishing. One of two sizes accommodates every angler.
Part No: 30975
|
|
|
|
Home -> Fishing -> Fishing Accessories->Brute Buster Harness™
Standing up, or sitting down, the Brute Buster Harness from Braid offers rugged, adjustable support when fighting gamefish in the 50-100 lb. Durable ballistic nylon, over a rugged plastic frame, disperses pressure over a wide area of the mid and lower back, to lessen strain and increase power. Easily adjusted on each side. Wide support area reduces strain on back. Made of the highest quality components to stand the rigors of true big game fishing. One of two sizes accommodates every angler.
Part No: 30950
|
|
|
|
These snaps hooks feature bronze construction with swivel eyes. Working loads not available from mfr. Ship 0.
Part No: S-1121P
|
|
|
|
Home -> Fishing -> Reels -> Spinning Reels->Baitrunner Spinning Reels
Featuring new spinning reel technology and a modern, compact design, Shimano has re-launched its proven Baitrunner series, with a secondary drag system that allow baits to swim free with the bail closed. Propulsion Line Management System: Propulsion Spool Lip, S-Arm Cam, SR One-Piece Bail Wire, Power Roller III. S-Concept: S-Rotor, S-Arm Cam, Direct Drive Mechanism (Thread-In Handle Attachment), Oversized Septon Grips for Power and Comfort, WP Drag (Waterproof Drag). Machined Aluminum Handle.
Part No: BTR4000D
|
|
|
|
Home -> Fishing -> Reels -> Spinning Reels->Baitrunner Spinning Reels
Featuring new spinning reel technology and a modern, compact design, Shimano has re-launched its proven Baitrunner series, with a secondary drag system that allow baits to swim free with the bail closed. Propulsion Line Management System: Propulsion Spool Lip, S-Arm Cam, SR One-Piece Bail Wire, Power Roller III. S-Concept: S-Rotor, S-Arm Cam, Direct Drive Mechanism (Thread-In Handle Attachment), Oversized Septon Grips for Power and Comfort, WP Drag (Waterproof Drag). Machined Aluminum Handle.
Part No: BTR6000D
|
|
|
|
Home -> Fishing -> Reels -> Spinning Reels->Baitrunner Spinning Reels
Featuring new spinning reel technology and a modern, compact design, Shimano has re-launched its proven Baitrunner series, with a secondary drag system that allow baits to swim free with the bail closed. Propulsion Line Management System: Propulsion Spool Lip, S-Arm Cam, SR One-Piece Bail Wire, Power Roller III. S-Concept: S-Rotor, S-Arm Cam, Direct Drive Mechanism (Thread-In Handle Attachment), Oversized Septon Grips for Power and Comfort, WP Drag (Waterproof Drag). Machined Aluminum Handle.
Part No: BTR8000D
|
|
|