|
|
Plumbing->Fittings & Valves->Maxxflow Angled and Straight Drains
Maxxflow Drains provide maximum sink, shower or deck drainage Fits sizes from 1" to 1 1/2" hoses Flush head allows complete drainage Available with either screen or basket style traps to catch waste particles before clogs occur 100 degree angled (elbow drains) in 1" and 1 1/8' drain considerably faster then standard 90 degree elbows Complete assembly includes nut Fits marine sanitation hose
Part No: 14059
|
|
|
|
|
Maxxflow Drains provide maximum sink, shower or deck drainage Fits sizes from 1" to 1 1/2" hoses Flush head allows complete drainage Available with either screen or basket style traps to catch waste particles before clogs occur 100 degree angled (elbow drains) in 1" and 1 1/8' drain considerably faster then standard 90 degree elbows Complete assembly includes nut Fits marine sanitation hose
Part No: 14058
|
|
|
|
|
Maxxflow Drains provide maximum sink, shower or deck drainage Fits sizes from 1" to 1 1/2" hoses Flush head allows complete drainage Available with either screen or basket style traps to catch waste particles before clogs occur 100 degree angled (elbow drains) in 1" and 1 1/8' drain considerably faster then standard 90 degree elbows Complete assembly includes nut Fits marine sanitation hose
Part No: 14049
|
|
|
|
|
Plumbing->Fittings & Valves->Maxxflow Angled and Straight Drains
Maxxflow Drains provide maximum sink, shower or deck drainage Fits sizes from 1" to 1 1/2" hoses Flush head allows complete drainage Available with either screen or basket style traps to catch waste particles before clogs occur 100 degree angled (elbow drains) in 1" and 1 1/8' drain considerably faster then standard 90 degree elbows Complete assembly includes nut Fits marine sanitation hose
Part No: 14060
|
|
|
|
Sailboat->Downwind Poles & Cars->Pole End Fittings & Tub->Spinnaker Pole Ends
Designed for maximum strength and lateral latch support under extreme loads. All-plastic body and metal latch. Well-rounded openings allow for free movement of the guy. The angled latch and hook allow for easy attachment to either sheet or mast eye.
Part No: R4220
|
|
|
|
Hardware for mounting biminis, including a universal mount for use when mounting on a flat surface isn't possible.
Part No: 99W 11833
|
|
|
|
|
Hardware for mounting biminis, including a universal mount for use when mounting on a flat surface isn't possible.
Part No: 99W 11829
|
|
|
|
|
Hardware for mounting biminis, including a universal mount for use when mounting on a flat surface isn't possible.
Part No: 11830
|
|
![1]( "1")
|
|
Ball-and-socket bases allow blocks to articulate so they lead fairly from any direction to any direction. Stanchion base mounts to any 7/8" or 1"dia. stanchion Small and Medium use #10 FHMS.
Part No: 097
|
|
![1]( "1")
|
|
Lightweight, low-friction blocks with hi-load composite bearings carry wire halyards and control line cascades. Side load balls minimize friction from twisting or unfair leads on 304. 300s have thrust washers. Blocks open to allow passage of swaged wire.
Part No: 302
|
|
|
|
Sailboat->Traveler, Tracks & Vang
Part No:
|
|
![1]( "1")
|
|
Lightweight, low-friction blocks with hi-load composite bearings carry wire halyards and control line cascades. Side load balls minimize friction from twisting or unfair leads on 304. 300s have thrust washers. Blocks open to allow passage of swaged wire.
Part No: 466
|
|
|
|
Cordage->Rigging Products->Norseman Cones For 1x19 Wire
Cones for 1x19 wire (cones for 7-Strand and Dyform available only through Special Order).
Part No: NCC-06
|
|
|
|
Provides abrasion protection for wire and cable. Allows leads in and out at any point for easy installation. Self-extinguishing in accordance with UL 94v.2 and ABYC recommendations. Rated for temps 40°F to 170°F.:Provides abrasion protection for wire and cable.
Part No: 453906
|
|
|
|
|
Electrical->Switches, Fuses & Accessories->Split Loom
Provides abrasion protection for wire and cable. Allows leads in and out at any point for easy installation. Self-extinguishing in accordance with UL 94v.2 and ABYC recommendations. Rated for temps 40°F to 170°F.:Provides abrasion protection for wire and cable.
Part No: 453901
|
|
|
|
Assorted packs of stainless-steel cotter pins.
Part No: 1188MP
|
|
|
|
|
Assorted packs of stainless-steel cotter pins.
Part No: 1184MP
|
|
|
|
|
Assorted packs of stainless-steel cotter pins.
Part No: 1185MP
|
|
|
|
Engine Systems->Engine Parts->Exhaust, Manifolds->Hotshield Fiberglass Tape
This insulating fiberglass tape is the proper way to contain the heat radiated by hot manifolds, exhaust pipes and mufflers. Simply wrap the tape around the manifold, exhaust pipe or muffler, and secure with locking wire. 10 feet of.041" stainless steel locking wire included.
Part No: 20010
|
|
|
|
Cordage->Rigging Products->Stainless-Steel Thimbles
Very strong type 316 stainless steel.
Part No: C0123-0001-W
|
|
|
|
Prevent damaging ice formation around your boat’s hull with a 1/2hp or 3/4hp energy efficient Ice Eater. Motor housing is constructed of corrosion-resistant, stainless steel (304) and has a bronze endbell. Motor is matched with a permanent-split capacitor to ensure quick, high-torque and smooth operation from the single-phase induction motor.
Part No: P500/115/25
|
|
|
|
Anchor & Docking->Chain & Shackles
Part No:
|
|
|
|
Cordage->Running Rigging By The Foot->Running Rigging->Yale Vizzion Line
A great choice for where you need higher strength and lower stretch than all-polyester lines. Vizzion eliminates creep and won't pick up water. Features special Vectran polymer core for minimal stretch and tri-strand, abrasion-resistant polyester filament sleeve.
Part No: 99M 7067932R
|
|
|
|
Nylon Male Pipe to Hose Fittings
Part No: 99W 94-181-00
|
|
|
|
|
Nylon Male Pipe to Hose Fittings
Part No: 99W 139889
|
|
|
|
|
Nylon Male Pipe to Hose Fittings
Part No: 99W 29128-000
|
|
|
|
Assorted fittings, adapters, plugs, splicers & spares for Seafit Plugs
Part No: 99W 139968
|
|
|
|
|
Assorted fittings, adapters, plugs, splicers & spares for Seafit Plugs
Part No: 99W 139987
|
|
|
|
Used to grab a link of chain, so the load can be taken up on a length of nylon line. This takes the load off the windlass and provides some shock absorption as the boat moves in waves. As strong as the equivalent size Proof Coil chain.
Part No: 440242445
|
|
|
|
Galvanized drop forged steel with Monel cotter pin.
Part No: SWVLJE1/2CWM
|
|
