Top Sellers
T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
T-Top Boat Cover, Center-Line Length 19'5" to 20'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
Ultra Blue Three-Strand Line, 1/4" Dia., 1,700lb. Breaking Strength from SAMSON ROPE
Ultra-strong line outlasts polypro two to one Made from bi-polymer olefin fiber, ultra-strong Ultra Blue is 30%–35% stronger than polypropylene and has more than twice the wear life. UV light resistance is excellent, it is easy to grip and it floats.
|
Snap-On Cable Cover, 1/4" Wire Dia. from DAVIS INSTRUMENTS
White vinyl cable covers in 6' lengths. Tubes split down length and install in seconds.
|
33C Red Jacket Cable, 18' from TELEFLEX
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
|
4300BC TFX Cable - 20' from TELEFLEX
TfXtreme's unique design assures smoothness and efficiency–with hardly any lost motion–even in the longest and most complex cable routings! This means superior feel at the control, in any boat–performance that had been considered "impossible". TfXtreme achieves the "impossible". Patent-pending splined core to achieves the impossible–easy movement and minimum lost motion.
|
3/16" AmSteel-Blue Rope, Red from SAMSON ROPE
AmSteel-Blue is a 12-strand braided rope utilizing Parallay design with our proprietary blue Samthane coating with Dyneema® SK-75 fiber. This rope yields the maximum in strength-to-weight ratio and is stronger than wire rope constructions—yet it floats. Superior flex, fatigue and wear resistance. Stronger than AmSteel. Much stronger than steel. Very low stretch. Easily spliced. Superior flex.
|
Cabin Hatch/Vent from LEWMAR
Designed to fit Lewmar hatches or to be mounted on deck, this vent features a built-in gasketed bung that makes it 100% watertight. The trim piece is available for thru-deck installations. Includes mounting screws. Type: Passive vent . Material: Acrylic composite . Dimensions: 2-1/4"H x 6-3/4" Dia. . Cutout Size: 3" .
|
Hatch Riser Arm for 20" x 20" Hatch from TAYLOR
Replacement arms for Taylor hatches from 1987 to the present. Universal arms can be left or right.
|
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
|
Screen Kit Hinge from LEWMAR
Allows the aluminum framed screen included with Lewmar Trim and Screen Kits to be hinged for easier access to the hatch.
|
|
|
45lb. CQR Anchor, Boats 32'–58', 40-5/8"L x 14"W x 17"H from LEWMAR
The legendary Lewmar plow anchor stays put, won't breakA favorite among bluewater cruisers for its strength and performance in a wide range of bottom conditions. Excellent penetration in sand, weeds, rocks and mud. Trouble-free anchor roller stowage. Attach a trip line to the eye on the horn for easy break-out. Hinged shank prevents breakout during wind shifts. Forged steel construction. Lifetime warranty against breakage. Material: Galvanized Steel . Application: Sand, Rock and Grass .
|
Automatic Generator Starter (AGS) from XANTREX
AGS works in conjunction with the MS2000 Inverter/Charger, Xantrex System Control Panel and your generator to ensure your house batteries always remain charged. The AGS can start your generator based on battery voltage, state of battery charge, or thermostat level. Programmable quiet times ensure the AGS does not start your generator at inappropriate times. LEDs display AGS status. 3. 8"H x 5. 8"W x 1.
|
AC 36-Position Circuit Breaker Panel, 27 Circuit Breakers, 14-3/4" x 11-1/4" from BLUE SEA SYSTEMS
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions. Digital Multimeter.
|
|
from LEWMAR, Blue from TAYLOR, 5h)'' from ICOM, Cable from XANTREX
|
|
These covers are designed to fit over bow rails, medium to high walk-through or one-piece windshields and other low-profile accessories. Outboard model covers come complete with a bound-in-motor hood. Covers are patterned to ft most V-hull runabouts with open or closed bows.
Part No: 71724
|
|
|
|
These Seaward ranges were rated #1 by Practical Sailor and Powerboat Reports. They feature stainless-steel construction and fuel lines, AGA approved thermocouple valves that shut off in case burners are extinguished, and piezo electric ignition that needs no electrical hookup. Safety clips secure range tops to eliminate rattling. Thermostatically-controlled 8000 Btu ceramic oven maintains steady temperature, distributes heat evenly, makes cleaning easy and conserves fuel. Built to ANSI Z. 21.
Part No: 2172-2001
|
|
|
|
Assorted styles to fit your needs.
Part No: 607010
|
|
|
|
Aluminum alloy sheave and dual Torlon® ball bearing races for higher working loads. Sheave: Anodized aluminum alloy . Ball Bearings: Torlon® Sheave Size: 2 3/8" (60mm) . Line Dia. : 7/16" max. . Cheek Material/Finish: Anodized aluminum alloy .
Part No: 29901612
|
|
|
|
Assorted styles to fit your needs.
Part No: 607019
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-114-214
|
|
|
|
Ace Mesh Shrimp-Smelt or Minnow Net Bow: 16" diameter. Handle: 37"–66".
Part No: ACM-16-6-2PC
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
|
|
|
|
Designed for use with SW and PS inverter/chargers, the SWRC is a full-function remote control with backlit LCD display. The remote control comes with a standard 25’ (7. 5 m) cable or a 50’ optional (15 m) cable.
Part No: SWRC/50FT
|
|
|
|
12 Volt LED Length Overall: 1-7/8" Width: 9/16" Screw Size: #6.
Part No: 0145DP0NYN
|
|
|
|
CLAMP ON ROD HOLDER .
Part No: 88161
|
|
|
|
1 1/4IN HORIZONTAL MOUNT.
Part No: 88164-1
|
|
|
|
Bows moounted in bow sockets are the sure and easy way to keep a boat cover taut and free from water-collecting pockets. Sockets can be mounted on any rail system or anywhere on deck wall. Rubber gasket provides snug fit for fiberglass bows. Super strong and flexible, will not take a “set”. Cut to desired length. Incude rubber end covers to grab socket.
Part No: 925
|
|
|
|
Silk screened black letter on a 10" x 16" white nylon pennant. . Use with the pulpit staff. . Made in U. S. A. . Ship 0. 5 lbs.
Part No: 33309
|
|
|
|
RN9YC Spark plug with copper core design.
Part No: 99M RN9YC
|
|
|
|
Replacement outboard starter, fits: Mercury 1999-UP 2. 5 DFI . 1996-1999 200 HP V6 DFI . 1998-Up 225 HP V6 DFI . 1999-Up 3. OL V6 .
Part No: 5381
|
|
|
|
Requires 2 9015-G gaskets per plate.
Part No: 8124
|
|
|
|
Print on Demand Nautical ChartsAccurate and up-to-date, charts include latest notice to mariners corrections, NIMA and NOAA's safety updates. . Charts are printed after your order is placed, ensuring that you receive the most up-to-date information. . Approved by NOAA, meets USCG carriage requirements, SOLAS compliant and a replacement for traditional NOAA paper charts. . Distinctive graphics and vibrant colors provide easy readability under varying light conditions.
Part No: 14908 POD
|
|
|
|
Our full line of VHF replacement batteries from models past and present.
Part No: BP-186
|
|
|
|
HINGES, IGLOO MARINE SERIES.
Part No: 24012
|
|
|
|
Exhaust Manifold Mounting Kit Mercruiser GM Small Block V8 305-350cu. in.
Part No: 18-8520
|
|
|
|
Replacement cover gasket for various Mercury outboards; replaces OEM #27-96278.
Part No: 18-2808-9
|
|
|
|
Temperature, false-trip-free, AC/DC breakers For use with either AC or DC current. Magnetic circuit breakers are temperature-stable. A false-trip free mechanism prevents breaker from being held with contacts closed during overload. Switch Type: Toggle . Voltage Compatibility: AC, DC . Safety Features: Temperature stable, false-trip free. Housing Material: Plastic Housing . Dimensions: 2" x 1. 64" x . 75" . Terminal Type: Screw .
Part No: 551530
|
|
|
|
You know they’re down there the deep dwellers the huge saltwater monsters that break trolling lines and records! Find out just how to bag ‘em with instructional video hints.
Part No: F3975DVD
|
|
|
|
You know they’re down there the deep dwellers the huge saltwater monsters that break trolling lines and records! Find out just how to bag ‘em with instructional video hints.
Part No: F9331DVD
|
|
|
|
Print on Demand Nautical Charts Accurate and up-to-date, charts include latest notice to mariners corrections, NIMA and NOAA's safety updatesCharts are printed after your order is placed, ensuring that you receive the most up-to-date informationApproved by NOAA, meets USCG carriage requirements, SOLAS compliant and a replacement for traditional NOAA paper chartsDistinctive graphics and vibrant colors provide easy readability under varying light conditions.
Part No: 16083 POD
|
|
|
|
Includes software CD, memory cartridge and USB peripheral device for connecting your C-cartridges to the computer. System requirements: Windows 95/98/2000/ME/XP, 8MB RAM (32MB for 2000, ME and XP), 4MB available disk space, VGA display, one available USB port View contours, soundings, port information, marina information, tide data . Create and change routes, measure distances, edit waypoints and marks . Enables transfer of saved trip plans to C-MAP memory card for use in your chart plotter .
Part No: Mplanner XX
|
|
|
|
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
Part No: 40220
|
|
|
|
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
Part No: 40410
|
|
|
|
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
Part No: 74207OB
|
|
|