Top Sellers
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
|
|
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
|
|
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
|
Transom Drain Tube & Plug from MOELLER
This nylon drain tube won't rot, bend or mildew, fits flush to your transom, and allows water to drain when your vessel is trailered. A rubber O-ring makes a watertight seal. Can be loosened with a flat-head screwdriver. Fits 1 1/8'' openings. Mounted with rivets or #8 fasteners.
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
|
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
|
Nauta 9 Gallon Flexible Fuel Tank from IMTRA CORPORATION
Flexible gasoline tanks won't rust, don't rattle, are easy to tie down, easy to carry, and won't scrape your boat. The Nauta 9-Gallon flexible fuel tank features comfortable, molded carrying handles and rugged 840-denier nylon construction. Fitted with a 1 1/2'' pivoting fill and a capped and 1/4'' NPT hose barb. Measures 28 1/2'' x 17 1/2'' x 6 1/2''.
|
|
|
|
|
Potable Water Holding Tank, 3 Gal. from TODD ENTERPRISES
1520) requirements. Standard Tanks feature a multiple port arrangement that enables use as a sanitation holding tank or for potable water storage. They include two 1 1/2" fill/drain ports and two 1/2" vent/supply ports. Designed for waste storage, each includes two 1 1/2" ports for inlet and drain and one 1/2" vent port. Both Standard and Heavy-Duty Tanks feature threaded NPT ports that are molded in to eliminate stress cracks and leaks. One year warranty.
|
|
1-1, Drain Fitting, 2" Straight, Drain Fitting, 62gpm, 4" Flange, 8" Flange
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
910
920
930
940
950
960
970
980
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1,000
1,001
1,002
1,003
1,004
1,005
1,006
1,007
1,008
1,009
1,010
1,011
1,012
1,013
1,014
1,020
1,030
1,040
1,050
1,060
1,070
1,080
1,090
1,100
1,200
1,260
|
|
|
Home -> Plumbing -> Freshwater Systems->Prefilters
These polyester prefilter cartridges help filter out larger sediment to ease the demands placed on your watermaker.
Part No: 8012861
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Quick Change Filter Kit
No more "boat water" taste! Enjoy great tasting, healthy, clean water on your boat or RV. Filters chlorine, sediment, lead and cysts. Features easy installation and a no-mess, disposable, quick-twist carbon block filter that you can change in seconds. Kit includes head, cartridge, winterizing diverter, fittings and mounting hardware. Filter is 12"H x 2. 5"W. One year warranty. Ensures drinking water tastes good and is safe to drink.
Part No: RV-QDH1-A
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Replacement Parts for West Marine Pressure Water Pumps
Replacement parts for West Marine pressure water pumps Pump Head Replacement, 2. 4 GPM Water Pressure System Pump . Pump Head Replacement, 3. 4 GPM Water Pressure System Pump . Pump Head Replacement, 5. 0 GPM Water Pressure System Pump . Pump Head Replacement, 3. 4 GPM Wash Down Pump . Water Pressure System Pump Switch Assembly . Wash Down Pump Switch Assembly . Water Pressure System and Wash Down Quick-Connect 1/2", 3/8" Hose .
Part No: 09-46938
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Freshwater Pumps->Sensor Max VSD Water Pumps
Versatile pumps feature variable speed control, solid state pressure sensor and nearly silent operation with no cycling. Controls pressure by changing motor speed and speeds up as demand increases. Self priming to 10' and able to run dry without damage. No accumulator tank needed. Operates on 12V or 24V DC. Switch Type: Pressure sensor controlled with no pressure switch . Self-Prime: 10' . Material: Glass-filled polypropylene . Port Sizes: 1/2" hose or 1/2" Qest thread .
Part No: 32755-0000
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Shower Sump System
Shower pump turns itself on and off automaticallyA full-capacity shower drain system with automatic activation. Includes a clear, screw-down cover for easy inspection, removable strainer for easy cleaning, and an internal check valve to prevent back siphoning. 800gph capacity. Consists of a bilge pump, Rule-A-Matic float switch and an enclosing sump.
Part No: 98A-24
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Sink Drain Fittings
1-1/4" Straight, 3/4" Hose, Plastic.
Part No: 907013
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Sink Drain Fittings
null.
Part No: 907014
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Sink Drain Fittings
null.
Part No: 907000
|
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Sink Drain Fittings
null.
Part No: 907027
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Sink Drain Fittings
null.
Part No: 907022
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Sink Drain Fittings
null.
Part No: 907017
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Sink Drain Fittings
2" Straight, 1-1/2" NPT, Plastic.
Part No: 907015
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Stainless Steel Drain Fittings
Designed to fit 2-1/16" drain openings, these fittings feature mirror-polished, 304 stainless steel flanges. The slight downward slant of the Low-Profile 90° drain’s hose barb promotes better drainage and unlike some others, it fits standard 1"ID hose.
Part No: S00-0104-UP-R
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Stainless Steel Sinks and Basins
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
Part No: S64-1515-UM-D
|
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Stainless Steel Sinks and Basins
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
Part No: S44-1831-UM-D
|
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Stainless Steel Sinks and Basins
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
Part No: S24-1400-UM-D
|
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Stainless Steel Sinks and Basins
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
Part No: S14-2700-UM-D
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Twist Deck Shower
A refreshing departure from deck shower designs of the past, the innovative Twist offers simple operation in a space-saving, ergonomic design. Spray holes are located in the soft-body handle and a twist of the wrist is all you need to initiate water flow or mix hot with cold. Material: High-impact, glass-filled polypropylene and Nitrile . Dimensions: Side Mount: 4-3/4"dia. x 7-1/2"H (Requires 6"D clearance); Top Mount: 2-5/16"dia. x 7-1/2"D . 2' .
Part No: DS0005
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Watermaker Protection System and Filters
This system can be easily installed to your watermaker inlet line to prevent gas and oil pollution. Even the slightest amount of oil or gas can irreparably damage a watermakers reverse osmosis membranes causing them to cease function. Using infused filters, this system captures all hydrocarbon pollution before it can enter the reverse osmosis matrix. A clean filter can remove 100% of oil, gas, diesel and other hydrocarbons from your water intake.
Part No: 8-WP-1
|
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Watermaker Protection System and Filters
This system can be easily installed to your watermaker inlet line to prevent gas and oil pollution. Even the slightest amount of oil or gas can irreparably damage a watermakers reverse osmosis membranes causing them to cease function. Using infused filters, this system captures all hydrocarbon pollution before it can enter the reverse osmosis matrix. A clean filter can remove 100% of oil, gas, diesel and other hydrocarbons from your water intake.
Part No: 8-MRO
|
|
|
|
Home -> Plumbing -> General Purpose Pumps
110V AC Flexible Impeller Pump Similar to Water Puppy DC pumps, but for use with shore power or AC power from your genset. Self-priming and portable. Accepts optional vacuum switch to shut off the pump automatically if unattended preventing dry running. Removable end cover enables easy impeller service Includes neoprene impeller and grounded power cord Not ignition protected—do not use when flammable vapors are present 26 Gpm 1" NPT Weight 35.
Part No: 6050-0003
|
|
|
|
Home -> Plumbing -> General Purpose Pumps
Designed for use as a washdown pump and/or livewell tank pump, this 12V pump delivers water at 7–10psi. Advanced safety features include anti-airlock and ignition protection. Heavy-duty construction, with double-insulated motor. Can run dry without damage. Must be mounted below the waterline. Application: Washdown, livewell circulation, general non-self-priming uses. gpm: 63 (3800 GPH). Port Sizes: 1-1/2" barb inlet and outlet. Dimensions: 5-1/4"H x 8-1/2"W.
Part No: 17A
|
|
|
|
Home -> Plumbing -> General Purpose Pumps
110V AC Flexible Impeller Pump Similar to Water Puppy DC pumps, but for use with shore power or AC power from your genset. Accepts optional vacuum switch to shut off the pump automatically if unattended preventing dry running. Removable end cover enables easy impeller service Includes neoprene impeller and grounded power cord Not ignition protected—do not use when flammable vapors are present Not intended for continuous duty 3. 4Gpm 3/8" Port NPT garden hose Weight 5lb.
Part No: 12210-0001
|
|
|
|
Home -> Plumbing -> General Purpose Pumps
Jabsco Flexible Impeller Pumps Corrosion-resistant bronze pumps driven by an external power source (usually the engine) are ideal for engine cooling, washdown, circulation and many general purpose onboard or dockside applications. The shafts are installed with permanently lubricated ball bearings for long life in heavy-duty service.
Part No: 7420-1001
|
|
|
|
Home -> Plumbing -> General Purpose Pumps
Dual Head Pump Service Kits for Models 7013378 and 7013386.
|
|
|
|
Home -> Plumbing -> General Purpose Pumps
Service Kit for Sensor Max VSD Water Pump.
Part No: 18920-9043
|
|
|
|
Home -> Plumbing -> General Purpose Pumps
Nitrile Replacement Impeller for Wakeboard & Boat Ballast Pump.
Part No: 6303-0023
|
|
|
|
Home -> Plumbing -> General Purpose Pumps
Fits the Jabsco flexible impeller pedestal pump 6400, 7420, 6590, 11870, 18330, 18370-Series.
Part No: 816-0000
|
|
|
|
Home -> Plumbing -> General Purpose Pumps
Step up to extreme cleaning with this seven gallon per minute, high pressure washdown system. The powerful spray makes cleaning your boat or dock faster and easier than ever. With complete instructions and an included main breaker, this washdown system can be installed on almost any size boat. For many years, Jabsco PAR MAX washdown pumps have been the preferred system for cleaning marine vessels, making it an industry standard. Includes 25' hose coil . Voltage: 24V DC. Strainer: Included .
Part No: 52900-0094
|
|
|
|
Home -> Plumbing -> General Purpose Pumps
These kits allow periodic repair and replacement of the diaphragm or the valves in the above lever pumps.
Part No: 282
|
|
|
