Mustang Rearming Kit for Models MD3031 and MD3032 from MUSTANG
Rearming kits are easy to use and will keep your inflatable PFD up to date with replacement CO2 cylinders, bobbins and green inflator pins. Regular maintenance can reduce the possibility of premature inflation.

Ocean Mate I™ SOLAS Vest, Standard from STEARNS
Ocean Mate™ I Type I flotation device complies with SOLAS 83 requirements. Minimum of 18 lb. buoyancy (child). Reversible offshore PFD designed for quick donning . 3M Scotchlite Reflective Material SOLAS-grade 6755 on panels . Stackable for easy storage . Heavy-duty stainless steel hardware with an attached SOLAS whistle . Light storage pocket .

West Marine/Stearns PFD Rearming Kit from WEST MARINE
West Marine/Stearns PFD Rearming Kit Style: Manual. Cylinder Weight: 16g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin. PFD Brands Commonly Used With*: West Marine/Stearns PFD. Inflator Number: 840. *The term "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.

Type I Commercial Life Vest, Child, Under 90lb. from KENT
Designed to extend survival time in rough waters, these vests represent an excellent value in commercial safety gear. Capable of turning an unconscious person to a vertical or slightly backward position in the water. Sturdy, durable foam flotation won’t waterlog. Adjustable strap for a snug fit. USCG-approved and is required on commercial craft. USCG Type: I. Intended Use: Commercial. Features: Reflective patches. Buoyancy: Adult: 23lb. Flotation Material: Polyethylene foam.

Gelcoat Restoration Kit from MEGUIARS
Everything you need to rejuvinate and protect your boat's gelcoatAssortment of Meguiar’s fiberglass maintenance products to clean, polish and protect badly oxidized fiberglass. Contains one 16oz. container each of #56 Pure Wax, #49 Heavy-Duty Oxidation Remover and #45 Boat Polish. Complete gelcoat restoration system for your boat.

304 Stainless-Steel Hose Clamp, 3-1/8" to 4", SAE Size 56 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .

Potable Water Holding Tank, 3 Gal. from TODD ENTERPRISES
1520) requirements. Standard Tanks feature a multiple port arrangement that enables use as a sanitation holding tank or for potable water storage. They include two 1 1/2" fill/drain ports and two 1/2" vent/supply ports. Designed for waste storage, each includes two 1 1/2" ports for inlet and drain and one 1/2" vent port. Both Standard and Heavy-Duty Tanks feature threaded NPT ports that are molded in to eliminate stress cracks and leaks. One year warranty.

Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".

ARS-5 Advanced Regulator from BALMAR
Simply select one of five preset program choices based on battery type, and the belt size setting that matches your alternator’s drive belt width and alternator output rating. Battery settings include standard and deep-cycle flooded, gel, AGM, and Optima programs. When used with MC-TS-A and MC-TS-B alternator and battery temperature sensors, the ARS-5 ensures even greater charging performance, as well as critical protection for your alternator and batteries. Controls a single alternator only.

5"L T20 Snap Shackle, 31/32" Opening, 31/32" Bail, 10,000lb. MWL from TYLASKA
S. -made shackles offer race-ready high performance, one-handed operation and they can be snapped open under load. Large bail size ideal for additional sheets, spinnakers and other multi-line applications. They have a breaking strength of 5,000 lbs and weigh just 2. 2 ounces in the standard bail configuration. Ideal for J-24s, Mumm 30s and similar boats. Tylaska T8 Snap Shackles are perfect for applications requiring high strength and low weight. 5 ounces in the standard bail configuration.

12V Blaster Washdown Pump, 3.5 GPM from SHURFLO
Blast the grimiest decks clean with one of these durable freshwater/saltwater pumps. Positive-displacement three/four chamber diaphragm design is self-priming up to 6' and can run dry without damage. Include 3/4" and 5/8" garden hose adapters. Pro Blaster features higher capacity and a seamless motor shell for enhanced protection in saltwater environments. Suitable for mounting in wet locations. Include fittings and Blaster spray nozzle. Switch Type: Sealed 45psi pressure switch .

Motor Mate Lifting Davit from FORESPAR
The unit stores in its own 31" (787. Comes with tackle and will lift anything from the dinghy to the cockpit (or vice-versa) up to 100 lbs. Great for the dinghy motor, but also good for scuba tanks, ice, duffel bags, groceries, etc. The Motor Mate uses a Railfast® mounted ring on the rail and a "toe" on the cockpit coaming directly under the rail. Lightweight, portable, compact . Ideal for lifting outboard motors, sea bags, scuba gear . Lifting capacity: 100 lbs.

Pro Baitmaster™ Heavy-Duty Livewell Pump from SHURFLO
The fast and easy way to change your oil With a sealed switch and splash-proof "Shurcote II" seamless motor shell, this pump thrives in wet environments, such as continuous-duty live well (tanks under 35 gallons) or wash down applications. It features a run-dry capability and is designed to not overheat with extended use. Switch Type: Sealed 45 psi pressure switch . Material: Glass-reinforced nylon body and base-plate . Port Sizes: 1/2" NPS male . Dimensions: 5. 4"H x 5.

mi6 Tactical LED Flashlight from DR. LED
State-of-the-art three watt US made high-flux LEDs provide the most lumen per watt in LED technology. Construction is beautifully machined aluminum with a tough gray anodized surface. We guarantee that you will love this flashlight as much as you love your favorite Leatherman tool, or Myerchin rigging knife, or Makita driver-drill. We do recommend that you carry an extra set of batteries, however, since you'll be tempted to show it off so often that you'll need a refill set before you know it.