Zinc, 3 3/4" dia., 1/2" thickness from CANADA METALS
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.

Zinc, 1"shaft x 2 1/8"dia. x 2 1/8"L from CANADA METALS
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.

Zinc Grouper Anode from CANADA METALS
Supplements your boat's existing anodes An excellent anodic device to supplement a vessel’s existing anode system, especially to counteract stray current from defective shore power. Clip to bolt on outdrive. Clip to grounding strap if possible or wire items together with copper wire and clip to wire. Do not connect to negative battery terminals. Dimensions: 8 1/4"L x 3 1/4"W x 1 3/8"D.

Zinc Hull Anode - 6"L x 12"W x 1/2" thickness (B) from CANADA METALS
Hull Anodes Rigorously tested to ensure consistency and quality. Manufactured to OEM and MIL-SPEC specifications. NOTE: Attachment method indicated as follows: B=Bolts on. W=Welds on.

Alpha I, 1991-Pesent, Aluminum, CMALPHAKITA from CANADA METALS
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.

Bravo II/III, 1989-Present, Magnesium, CMBRAVO23KITM from CANADA METALS
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.

Bravo II/III, 1989-Present, Zinc, CMBRAVO23KITZ from CANADA METALS
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.

Alpha I, 1991-Pesent, Zinc, CMALPHAKITZ from CANADA METALS
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.

Liquid Metal Polish, 8.5oz. from FLITZ
Practical-Sailor Quote. "The Flitz cleaner was second only to the Miracle Cloth in cleaning effectiveness, but it’s too expensive, in our opinion. " Very effective on brass, chrome, aluminum and stainless steel Remove saltwater corrosion, oxidation, tarnish, rust and water stains from stainless-steel, anodized and bare aluminum, chrome, brass and bronze.

Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .

Folding Dock/Raft ladder 4 stp from GARELICK
Unique flip-up hinge mechanismUnique hinged ladder flips up and out of the water to prevent marine growth. Features a 10° angle for effortless boarding. Quick-release pins make it easy to remove for storage. 16"W steps have anodized aluminum tread and a curved step to make boarding more comfortable. Overall ladder width is 18". One-year warranty. Wide track 18"W ladder with full width 16" steps. Anodized aluminum heavy-walled 1"dia. tube construction.

Black Anodized Track, 1" x 2', 1/4" FH Fasteners from SCHAEFER
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.

Black Anodized Track, 1-1/4" x 8', 5/16" FH Fasteners from SCHAEFER
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.

Metal Polish - 2 Pound Can from FLITZ
This line of products is known to successfully remove saltwater corrosion, oxidation, tarnish, rust and water stains from: Stainless- steel, anodized and bare aluminum.

Folding Dock/Raft ladder 5 stp from GARELICK
Unique flip-up hinge mechanismUnique hinged ladder flips up and out of the water to prevent marine growth. Features a 10° angle for effortless boarding. Quick-release pins make it easy to remove for storage. 16"W steps have anodized aluminum tread and a curved step to make boarding more comfortable. Overall ladder width is 18". One-year warranty. Wide track 18"W ladder with full width 16" steps. Anodized aluminum heavy-walled 1"dia. tube construction.