Top Sellers
Handheld VHF Holder, 4 3/4"H x 2 3/4"W x 2"D from WEST MARINE
Keep your VHF radio safe and ready for instant useSoft, flexible PVC holders keep your handheld electronics secure, yet within reach. Fits most popular handheld VHFs and GPS. White. Small: 4 3/4"H x 2 3/4"W x 2"D.
|
LPG Solenoid 1/4In 12V W/Ftgs from TRIDENT RUBBER
Corrosion-resistant 12V and 24V solenoids with 1/4" female NPT ports. For low-pressure side of regulator. Come with fittings for connection to LPG regulator outlet and supply hose. Each includes: 1/4" male NPT x 3/8" male NPT hex reducing nipple.
|
Single Powerclutch, 1/4"–1/2" Line Dia., 1,250lb. MWL from SPINLOCK
Positive one-way locking clutches for easy release and relocking Reliable, lightweight, and powerful enough to handle high loads with outstanding line control. Features improved lever action, soft-feel handles for comfort, excellent line gripping and improved release. Application: Racers up to 27' and cruisers up to 35' . Height: 2-3/4" (69mm) . Length: 5-3/16" (134mm) . Width: Single: 1-1/2" (39mm); Double: 2-9/16" (65mm); Triple: 3-5/8" (91mm) .
|
Triple Powerclutch, 1/4"–1/2" Line Dia., 1,250lb. MWL from SPINLOCK
Positive one-way locking clutches for easy release and relocking Reliable, lightweight, and powerful enough to handle high loads with outstanding line control. Features improved lever action, soft-feel handles for comfort, excellent line gripping and improved release. Application: Racers up to 27' and cruisers up to 35' . Height: 2-3/4" (69mm) . Length: 5-3/16" (134mm) . Width: Single: 1-1/2" (39mm); Double: 2-9/16" (65mm); Triple: 3-5/8" (91mm) .
|
Double Powerclutch, 1/4"–1/2" Line Dia., 1,250lb. MWL from SPINLOCK
Positive one-way locking clutches for easy release and relocking Reliable, lightweight, and powerful enough to handle high loads with outstanding line control. Features improved lever action, soft-feel handles for comfort, excellent line gripping and improved release. Application: Racers up to 27' and cruisers up to 35' . Height: 2-3/4" (69mm) . Length: 5-3/16" (134mm) . Width: Single: 1-1/2" (39mm); Double: 2-9/16" (65mm); Triple: 3-5/8" (91mm) .
|
Saltist STT40H Conventional - Ultra High Speed Reel, 2 CRBB, 2BB, 1 RB, 6.4:1 Gear Ratio, 24.30 oz. from DAIWA RODS/REELS
Built For Today’s Super Braids Introducing Daiwa’s new Saltist™, with the features and rugged “Full-Metal Jacket” construction demanded by today’s ultra-strong braided lines and mono. 9 to 1 retrieve or new ultra high speed 6. 4 to 1 retrieve models that rip in over 47 inches of line with every crank, just the ticket for Kingfish. Features: Rugged, all-metal construction with rigid, one-piece aluminum frame . Super Drag . Up to 30% greater winding power . Powerful, high-strength alloy gears .
|
Single Powerclutch, 5/32"–5/16" Line Dia., 990lb. MWL from SPINLOCK
Positive one-way locking clutches for easy release and relocking Reliable, lightweight, and powerful enough to handle high loads with outstanding line control. Features improved lever action, soft-feel handles for comfort, excellent line gripping and improved release. Application: Racers up to 27' and cruisers up to 35' . Height: 2-3/4" (69mm) . Length: 5-3/16" (134mm) . Width: Single: 1-1/2" (39mm); Double: 2-9/16" (65mm); Triple: 3-5/8" (91mm) .
|
Portlight, 3-7/8" x 14-1/8" I.D. Opening, 6-3/4" x 17" Cutout, 7-3/4" x 18" O.D. from BOMAR
Style, functionality and simple installation are all features designed into the Flagship Series portlight. The elliptical portlight’s sleek design offers a large viewing area through a smoked 3/8" tinted acrylic lens. The exterior is beveled so it doesn’t collect water, allowing installation in angled cabin sides. Patented design is standard equipment on many boats including Sea Ray, Silverton, Carver, Pursuit and Four Winns. Included Accessories: Trim ring and removable screen .
|
Triple Powerclutch, 5/32"–5/16" Line Dia., 990lb. MWL from SPINLOCK
Positive one-way locking clutches for easy release and relocking Reliable, lightweight, and powerful enough to handle high loads with outstanding line control. Features improved lever action, soft-feel handles for comfort, excellent line gripping and improved release. Application: Racers up to 27' and cruisers up to 35' . Height: 2-3/4" (69mm) . Length: 5-3/16" (134mm) . Width: Single: 1-1/2" (39mm); Double: 2-9/16" (65mm); Triple: 3-5/8" (91mm) .
|
Swim Step Ladder from WEST MARINE
Grab-handles make getting out of the water so much easier! All-stainless ladder has polished 7/8" upper handle portion and mounting base, 1" tubing for uprights and flattened 1" tubing for steps with nonskid plastic treads for wet feet. Mounting Style: Swim platform or transom . Dimensions Deployed: 34-1/2"L x 13-3/4"W x 2-3/4"D . Dimensions Folded: 24"L x 13-3/4"W x 2-3/4"D . Mounting Hardware: Sold separately .
|
Surface Mount Urchin Bilge Pump from WHALE PUMPS
Manual bilge pump that works well for small to medium-sized boats. Stepped inlet/outlet nipples accommodate 1" and 1-1/2" hose connections. Infinitely variable handle/flow positions. Surface mount has fixed handle. Thru-deck mount has removable handle. gpm: 14. 5 . Material: Acetal copolymer . Dimensions: 11-3/4"H x 9-3/4"W x 10-7/8"L . Port Sizes: 1" or 1-1/2" .
|
Hatch - Ocean 10 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Storage Locker with Hinged Door from SAIL SYSTEMS
Increase your available storage area and save space at the same time. This recessed storage locker uses a continuous stainless steel hinge on the access door for long-lasting strength. Made of weather-able, acrylic capped ABS plastic for superior gloss, color retention and UV protection. Measures 11 3/4"H x 19 3/4"W x 7 1/4"D.
|
Thru-Deck Mount Urchin Bilge Pump from WHALE PUMPS
Manual bilge pump that works well for small to medium-sized boats. Stepped inlet/outlet nipples accommodate 1" and 1-1/2" hose connections. Infinitely variable handle/flow positions. Surface mount has fixed handle. Thru-deck mount has removable handle. gpm: 14. 5 . Material: Acetal copolymer . Dimensions: 11-3/4"H x 9-3/4"W x 10-7/8"L . Port Sizes: 1" or 1-1/2" .
|
|
1, 1-1, 4" to 1-1, 1-3, 3-1, 2-1, 8" to 1-1, 4" to 1-3, 4" to 3-1, 4" to 4-1, 16" to 1-1
|
This site contains about 39,562 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
970
980
990
1,000
1,010
1,020
1,030
1,040
1,050
1,054
1,055
1,056
1,057
1,058
1,059
1,060
1,061
1,062
1,063
1,064
1,065
1,066
1,067
1,068
1,069
1,070
1,071
1,072
1,073
1,074
1,075
1,076
1,077
1,078
1,079
1,080
1,081
1,082
1,083
1,090
1,100
1,110
1,120
1,130
1,140
1,150
1,160
1,200
1,300
1,319
|
|
|
Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704080
|
|
|
|
Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704021
|
|
|
|
Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704120
|
|
|
|
Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704060
|
|
|
|
Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704240
|
|
|
|
Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704070
|
|
|
|
Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704100
|
|
|
|
Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704210
|
|
|
|
Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704090
|
|
|
Plumbing -> Hose & Hose Clamps->Heavy-Duty 316 Stainless-Steel Hose Clamps
Clamp-Hose-HD 1-1/2 to 2-1/2|Clamp-Hose-HD 1-1/2 to 2-1/2.
Part No: SS12064ABA
|
|
|
|
Plumbing -> Hose & Hose Clamps->Heavy-Duty 316 Stainless-Steel Hose Clamps
Clamp-Hose-HD 3/4 to 1-1/8|Clamp-Hose-HD 3/4 to 1-1/8.
Part No: SS12028ABA
|
|
|
|
Plumbing -> Hose & Hose Clamps->Heavy-Duty 316 Stainless-Steel Hose Clamps
Clamp-Hose-HD 1/2 to 13/16|Clamp-Hose-HD 1/2 to 13/16.
Part No: SS12020ABA
|
|
|
Plumbing -> Hose & Hose Clamps->Heavy-Duty 316 Stainless-Steel Hose Clamps
Clamp-Hose-HD 1-1/2 to 2|Clamp-Hose-HD 1-1/2 to 2.
Part No: SS12050ABA
|
|
|
|
Plumbing -> Hose & Hose Clamps->Heavy-Duty 316 Stainless-Steel Hose Clamps
Clamp-Hose-HD 2 to 3|Clamp-Hose-HD 2 to 3.
Part No: SS12076ABA
|
|
|
|
Plumbing -> Hose & Hose Clamps->Heavy-Duty 316 Stainless-Steel Hose Clamps
Hose clamps you can trust now and later Trust these clamps for secure hose connections. All components are Type 316 stainless steel for ultimate corrosion resistance. The smooth, unperforated band surface and rolled edges prevent hose damage. Band and screw threads are properly pitched, rendering the clamp virtually immune to vibration-caused back-off. Hoses are measured by inside diameter, so use a clamp with a maximum opening at least a 1/4" larger .
Part No: SS12017ABA
|
|
|
|
Plumbing -> Hose & Hose Clamps->Heavy-Duty 316 Stainless-Steel Hose Clamps
Clamp-Hose-HD 1-1/16 to 1-1/2|Clamp-Hose-HD 1-1/16 to 1-1/2.
Part No: SS12038ABA
|
|
|
|
Plumbing -> Hose & Hose Clamps->Heavy-Duty 316 Stainless-Steel Hose Clamps
Clamp-Hose-HD 1-3/4 to 2-3/4|Clamp-Hose-HD 1-3/4 to 2-3/4.
Part No: SS12070ABA
|
|
|
|
Plumbing -> Hose & Hose Clamps->Heavy-Duty 316 Stainless-Steel Hose Clamps
Clamp-Hose-HD 2-3/4 to 3-3/4|Clamp-Hose-HD 2-3/4 to 3-3/4.
Part No: SS12095ABA
|
|
|
|
Plumbing -> Hose & Hose Clamps->Heavy-Duty 316 Stainless-Steel Hose Clamps
Clamp-Hose-HD 2-1/4 to 3-1/4|Clamp-Hose-HD 2-1/4 to 3-1/4.
Part No: SS12083ABA
|
|
|
|
Plumbing -> Hose & Hose Clamps->Heavy-Duty 316 Stainless-Steel Hose Clamps
Clamp-Hose-HD 2-1/2 to 3-1/2|Clamp-Hose-HD 2-1/2 to 3-1/2.
Part No: SS12089ABA
|
|
|
|
Plumbing -> Hose & Hose Clamps->Heavy-Duty 316 Stainless-Steel Hose Clamps
Clamp-Hose-HD 3-1/4 to 4-1/4|Clamp-Hose-HD 3-1/4 to 4-1/4.
Part No: SS12114ABA
|
|
|
|
Plumbing -> Hose & Hose Clamps->Heavy-Duty 316 Stainless-Steel Hose Clamps
Clamp-Hose-HD 1-1/4 to 2-1/4|Clamp-Hose-HD 1-1/4 to 2-1/4.
Part No: SS12057ABA
|
|
|
|
Plumbing -> Hose & Hose Clamps->Heavy-Duty 316 Stainless-Steel Hose Clamps
Clamp-Hose-HD 7/8 to 1-1/4|Clamp-Hose-HD 7/8 to 1-1/4.
Part No: SS12032ABA
|
|
|
|
Plumbing -> Hose & Hose Clamps->Heavy-Duty 316 Stainless-Steel Hose Clamps
Clamp-Hose-HD 5/8 to 15/16|Clamp-Hose-HD 5/8 to 15/16.
Part No: SS12024ABA
|
|
|
|
Plumbing -> Hose & Hose Clamps->Heavy-Duty 316 Stainless-Steel Hose Clamps
Clamp-Hose-HD 1-1/4 to 1-3/4|Clamp-Hose-HD 1-1/4 to 1-3/4.
Part No: SS12044ABA
|
|
|
|
Plumbing -> Hose & Hose Clamps->Heavy-Duty 316 Stainless-Steel Hose Clamps
Clamp-Hose-HD|Clamp-Hose-HD 3 to 4.
Part No: SS12102ABA
|
|
|
Plumbing -> Hose & Hose Clamps->Hi-Temp Silicone Hump Hose
Silicone hump hose has extremely high operating temperatures (up to 350°F) and much greater tolerance to engine movement, vibration, and misalignment than standard hump hose.
Part No: 116-272-6000
|
|
|
|
Plumbing -> Hose & Hose Clamps->Hi-Temp Silicone Hump Hose
Silicone hump hose has extremely high operating temperatures (up to 350°F) and much greater tolerance to engine movement, vibration, and misalignment than standard hump hose.
Part No: 116-272-5000
|
|
|
|
Plumbing -> Hose & Hose Clamps->Hi-Temp Silicone Hump Hose
Silicone hump hose has extremely high operating temperatures (up to 350°F) and much greater tolerance to engine movement, vibration, and misalignment than standard hump hose.
Part No: 116-272-4000
|
|
|
|
Plumbing -> Hose & Hose Clamps->Hi-Temp Silicone Hump Hose
Silicone hump hose has extremely high operating temperatures (up to 350°F) and much greater tolerance to engine movement, vibration, and misalignment than standard hump hose.
Part No: 116-272-8000
|
|
![Handheld VHF Holder, 4 3/4"H x 2 3/4"W x 2"D from WEST MARINE](http://images.westmarine.com/thumb/8717860.jpg "Handheld VHF Holder, 4 3/4"H x 2 3/4"W x 2"D from WEST MARINE")
