Top Sellers
|
|
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
Large Dinghy Snatch Block, 9/16" Line Dia., 40mm Sheave Dia., 1300 SWL from HOLT ALLEN
Glass-filled nylon cheeks with 316 stainless straps increase working efficiency more than 50% with minimal weight increase. Stainless ball bearings in a polypropylene cassette. For spinnaker sheet, jib sheet turning blocks, etc. Cheek Material/Finish: Glass filled nylon. Ball Bearing: Stainless ball bearings. Opening: Hinged cheek/axle.
|
|
|
Pusher from SAMSON ROPE
Includes everything you need to make a smooth splice in double braid: tubular fids for 1/4", 5/16", 3/8", 7/16" and 1/2" line, a pusher and complete instructions. Fids and pusher are also sold separately.
|
|
|
Type IV Standard Buoyant Cushion - White from KENT
Conventional throwable cushions meet USCG requirements for Type IV PFDs. Comfortable to sit on or to use as a backrest. Durable fabric covers. Heavy polypropylene straps make them easy to throw. Buoyancy: 18 lbs. Dimensions: 15"L x 16"W x 2. 5"H.
|
"Little" Crane, 175 lb. Capacity, 30" Arm Reach, 7:1 Purchase, 75' Line Length from ST. CROIX MARINE
Precision engineered and fabricated from stainless steel, these removable cranes lift heavy loads with ease. Best of all, it takes just 20 seconds to set up or remove for storage. Optional spare mounting kits (VPN #176 & 196) include a set of brackets and rail clamps for an extra mounting location. Material: Polished stainless steel. Height: 60" mast height. Mounting Style: Horizontal or vertical mounting to railing. Included Equipment: Complete kit with mounts and 5/16" line.
|
Series 40 Ratchet Block, Single/Cleat, 385lb. SWL, 3.4oz. from RONSTAN
Practical Sailor's Ratchet Block Click-Off rated Ronstan's Orbit block "Overall, the most impressive with its grip, versatility, and lightweight design. " The newest addition to Ronstan’s Orbit range of super lightweight, fiber-reinforced blocks. Ideal for sheet applications on dinghies up to 16' and control line applications for small keel boats. There are two styles of Series 40 ratchet blocks. Many of the top Grand Prix Laser sailors are switching to Orbit blocks.
|
WL/1 Fairlead Model from SPINLOCK
New low-profile design easily mounts to 1" stanchion using internal clamping system. WL/2 sheave model utilizes unique tracker ball angle adjustment. WL/1 Fairlead model includes stainless-steel bullseye for strength.
|
Midrange Four-Hole Eyestrap from HARKEN
Forged eyestraps are extremely strong and their smooth shape won’t chafe line. Stainless steel . 6000lb. Breaking load.
|
Small Boat Clevis Pin Kit from JOHNSON, C.S.
Assorted sizes of stainless-steel clevis and cotter pins. Small Boat kit contains 46 pieces ranging from 3/16"–5/16".
|
|
32" Sheave Dia, Line, SWL, 16" Line Dia, 2", 2" Sheave Dia, Aluminum Cheeks
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
970
980
990
1,000
1,010
1,020
1,030
1,040
1,050
1,056
1,057
1,058
1,059
1,060
1,061
1,062
1,063
1,064
1,065
1,066
1,067
1,068
1,069
1,070
1,071
1,072
1,073
1,074
1,075
1,076
1,077
1,078
1,079
1,080
1,081
1,082
1,083
1,084
1,085
1,090
1,100
1,110
1,120
1,130
1,140
1,150
1,160
1,170
1,200
1,260
|
|
|
Home -> Sailboat -> Blocks->Sheave Boxes & Lead Blocks
null.
Part No: RF568
|
|
|
|
Home -> Sailboat -> Blocks->Sheave Boxes & Lead Blocks
.
Part No: RF919
|
|
|
|
Home -> Sailboat -> Blocks->Snatch Blocks
Features include 15-5 PH stainless shackle and attachment bolt for strength, soft PVC cheeks that prevent damage to decks and eliminate clatter, cast 300 series stainless steel hasp and hardware, stainless roller bearings for smooth operation. The RF6741 blocks have removable aluminum sheaves, midrange (RF6710, 6711, 6720, and 6721) feature Acetal sheaves, and big boat 6751 sheaves are removable stainless steel. Black. Cheek Material/Finish: Soft PVC. Bearings: Stainless needle bearings.
Part No: RF6710
|
|
|
|
Home -> Sailboat -> Blocks->Snatch Blocks
Snatch blocks are one of the most versatile tools available for racing or cruising. The flexibility of these blocks makes them ideal for use as Genoa leads, spinnaker controls, or short sheet leads for jibs. Investment cast snap shackle head attaches to the block with a ball joint swivel. The key feature however, is that the block cage can be opened allowing a line to be inserted at any point, rather than being reeved (run through the end) as with conventional blocs.
Part No: 07-99
|
|
|
|
Home -> Sailboat -> Blocks->Snatch Blocks
null.
Part No: 1600
|
|
|
|
Home -> Sailboat -> Blocks->Snatch Blocks
This unique snatch block, built around a one-piece forged stainless steel head, is strong and simple to operate. The block’s swivel head is set into a forged arm that swings open with the pull of a release pin. A trunnioned snap shackle allows the block to rotate on two axes for proper block and load alignment. Sheave: Plastic. Cheek Material/Finish: Soft elastomer plastic. Bearings: None. Opening: Pin and swivel arm.
Part No: 34500
|
|
|
|
|
Home -> Sailboat -> Blocks->Snatch Blocks
Features include 15-5 PH stainless shackle and attachment bolt for strength, soft PVC cheeks that prevent damage to decks and eliminate clatter, cast 300 series stainless steel hasp and hardware, stainless roller bearings for smooth operation. The RF6741 blocks have removable aluminum sheaves, midrange (RF6710, 6711, 6720, and 6721) feature Acetal sheaves, and big boat 6751 sheaves are removable stainless steel. Black. Cheek Material/Finish: Soft PVC. Bearings: Stainless needle bearings.
Part No: RF6730
|
|
|
|
|
Home -> Sailboat -> Blocks->Snatch Blocks
Features include 15-5 PH stainless shackle and attachment bolt for strength, soft PVC cheeks that prevent damage to decks and eliminate clatter, cast 300 series stainless steel hasp and hardware, stainless roller bearings for smooth operation. The RF6741 blocks have removable aluminum sheaves, midrange (RF6710, 6711, 6720, and 6721) feature Acetal sheaves, and big boat 6751 sheaves are removable stainless steel. Black. Cheek Material/Finish: Soft PVC. Bearings: Stainless needle bearings.
Part No: RF6720
|
|
|
|
|
Home -> Sailboat -> Blocks->Snatch Blocks
Snatch blocks are one of the most versatile tools available for racing or cruising. The flexibility of these blocks makes them ideal for use as Genoa leads, spinnaker controls, or short sheet leads for jibs. Investment cast snap shackle head attaches to the block with a ball joint swivel. The key feature however, is that the block cage can be opened allowing a line to be inserted at any point, rather than being reeved (run through the end) as with conventional blocs.
Part No: 05-99
|
|
|
|
|
Home -> Sailboat -> Blocks->Snatch Blocks
Features include 15-5 PH stainless shackle and attachment bolt for strength, soft PVC cheeks that prevent damage to decks and eliminate clatter, cast 300 series stainless steel hasp and hardware, stainless roller bearings for smooth operation. The RF6741 blocks have removable aluminum sheaves, midrange (RF6710, 6711, 6720, and 6721) feature Acetal sheaves, and big boat 6751 sheaves are removable stainless steel. Black. Cheek Material/Finish: Soft PVC. Bearings: Stainless needle bearings.
Part No: RF6741
|
|
|
|
|
Home -> Sailboat -> Blocks->Snatch Blocks
Features include 15-5 PH stainless shackle and attachment bolt for strength, soft PVC cheeks that prevent damage to decks and eliminate clatter, cast 300 series stainless steel hasp and hardware, stainless roller bearings for smooth operation. The RF6741 blocks have removable aluminum sheaves, midrange (RF6710, 6711, 6720, and 6721) feature Acetal sheaves, and big boat 6751 sheaves are removable stainless steel. Black. Cheek Material/Finish: Soft PVC. Bearings: Stainless needle bearings.
Part No: RF6751
|
|
|
|
|
Home -> Sailboat -> Blocks->Snatch Blocks
.
Part No: 1601
|
|
|
|
|
Home -> Sailboat -> Blocks->Snatch Blocks
.
Part No: 1608
|
|
|
|
|
Home -> Sailboat -> Blocks->Snatch Blocks
Features include 15-5 PH stainless shackle and attachment bolt for strength, soft PVC cheeks that prevent damage to decks and eliminate clatter, cast 300 series stainless steel hasp and hardware, stainless roller bearings for smooth operation. The RF6741 blocks have removable aluminum sheaves, midrange (RF6710, 6711, 6720, and 6721) feature Acetal sheaves, and big boat 6751 sheaves are removable stainless steel. Black. Cheek Material/Finish: Soft PVC. Bearings: Stainless needle bearings.
Part No: RF6721
|
|
|
|
|
Home -> Sailboat -> Blocks->Snatch Blocks
.
Part No: 1609
|
|
|
|
Home -> Sailboat -> Blocks->Spring-Loaded Blocks on Slides
Captive liners allow blocks to glide along the track virtually without friction, yet they handle up to 3,500lb. of tension or compression load. They swivel 45° to each side of the track and their patented design prevents blocks from hitting the deck when sheets are flogging. For sails up to 715 sq. ft. and boats to 38’. Bearings: Plain bearing. Shackle/Strap Type: 45° stand-up-spring shackle on T-Track slider. Configuration: Genoa lead block, 1" or 1-1/4" T-Track.
Part No: 705-92
|
|
|
|
|
Home -> Sailboat -> Blocks->Spring-Loaded Blocks on Slides
Captive liners allow blocks to glide along the track virtually without friction, yet they handle up to 3,500lb. of tension or compression load. They swivel 45° to each side of the track and their patented design prevents blocks from hitting the deck when sheets are flogging. For sails up to 715 sq. ft. and boats to 38’. Bearings: Plain bearing. Shackle/Strap Type: 45° stand-up-spring shackle on T-Track slider. Configuration: Genoa lead block, 1" or 1-1/4" T-Track.
Part No: 504-82
|
|
|
|
|
Home -> Sailboat -> Blocks->Spring-Loaded Blocks on Slides
Captive liners allow blocks to glide along the track virtually without friction, yet they handle up to 3,500lb. of tension or compression load. They swivel 45° to each side of the track and their patented design prevents blocks from hitting the deck when sheets are flogging. For sails up to 715 sq. ft. and boats to 38’. Bearings: Plain bearing. Shackle/Strap Type: 45° stand-up-spring shackle on T-Track slider. Configuration: Genoa lead block, 1" or 1-1/4" T-Track.
Part No: 303-86
|
|
|
|
|
Home -> Sailboat -> Blocks->Spring-Loaded Blocks on Slides
Captive liners allow blocks to glide along the track virtually without friction, yet they handle up to 3,500lb. of tension or compression load. They swivel 45° to each side of the track and their patented design prevents blocks from hitting the deck when sheets are flogging. For sails up to 715 sq. ft. and boats to 38’. Bearings: Plain bearing. Shackle/Strap Type: 45° stand-up-spring shackle on T-Track slider. Configuration: Genoa lead block, 1" or 1-1/4" T-Track.
Part No: 08-92
|
|
|
|
|
Home -> Sailboat -> Blocks -> Fairlead Blocks->Spring-Loaded Blocks on Slides
Captive liners allow blocks to glide along the track virtually without friction, yet they handle up to 3,500lb. of tension or compression load. They swivel 45° to each side of the track and their patented design prevents blocks from hitting the deck when sheets are flogging. For sails up to 715 sq. ft. and boats to 38’. Bearings: Plain bearing. Shackle/Strap Type: 45° stand-up-spring shackle on T-Track slider. Configuration: Genoa lead block, 1" or 1-1/4" T-Track.
Part No: 704-92
|
|
|
|
|
Home -> Sailboat -> Blocks->Spring-Loaded Blocks on Slides
Captive liners allow blocks to glide along the track virtually without friction, yet they handle up to 3,500lb. of tension or compression load. They swivel 45° to each side of the track and their patented design prevents blocks from hitting the deck when sheets are flogging. For sails up to 715 sq. ft. and boats to 38’. Bearings: Plain bearing. Shackle/Strap Type: 45° stand-up-spring shackle on T-Track slider. Configuration: Genoa lead block, 1" or 1-1/4" T-Track.
Part No: 505-82
|
|
|
|
|
Home -> Sailboat -> Blocks->Spring-Loaded Blocks on Slides
Captive liners allow blocks to glide along the track virtually without friction, yet they handle up to 3,500lb. of tension or compression load. They swivel 45° to each side of the track and their patented design prevents blocks from hitting the deck when sheets are flogging. For sails up to 715 sq. ft. and boats to 38’. Bearings: Plain bearing. Shackle/Strap Type: 45° stand-up-spring shackle on T-Track slider. Configuration: Genoa lead block, 1" or 1-1/4" T-Track.
Part No: 03-72
|
|
|
|
Home -> Sailboat -> Blocks->Stainless-Steel Cruising ESP Blocks
Add dazzle to your boat with elegant stainless steel blocks. Sideplates are polished to a high luster to reflect your boat’s beauty, whether it’s classic wood, or a modern cruiser. Footblocks and deck organizers can be double stacked. Perforated mast collars, or mastbase situations where the lead may change, require swivel blocks. Footblocks Footblocks are available with lockoffs to temporarily secure sheets. A single block works for either port or starboard applications by flipping it over.
Part No: 6069
|
|
|
|
Home -> Sailboat -> Blocks->Ultimate Ratchet Blocks
"Releases the line more smoothly than the little Harken ratchet used on most Lasers. Great combination with the Rooster Laser mainsheets that everyone is using. " Exceptional holding power in a super lightweight block Designed to deliver maximum holding power with minimum weight. Versatile on/off ratchet switch can be fitted to either side of the sheave for port/starboard applications. Switch can be operated under load. Black anodized, 5mm shackle and 3-way head-post design.
Part No: RF72100L
|
|
|
|
|
Home -> Sailboat -> Blocks->Ultimate Ratchet Blocks
"Releases the line more smoothly than the little Harken ratchet used on most Lasers. Great combination with the Rooster Laser mainsheets that everyone is using. " Exceptional holding power in a super lightweight block Designed to deliver maximum holding power with minimum weight. Versatile on/off ratchet switch can be fitted to either side of the sheave for port/starboard applications. Switch can be operated under load. Black anodized, 5mm shackle and 3-way head-post design.
Part No: RF62100
|
|
|
|
Home -> Sailboat -> Blocks->Wire Blocks
Single blocks can double the power of a rope tackle using a cascading block system. Blocks up to 1" sheave diameter are stainless steel with nickel-plated brass sheaves. Blocks over 1" sheave diameter have removable anodized aluminum sheaves with Delrin® bushings. Micro Kite Blocks are very strong, super-lightweight.
Part No: RF13101-2
|
|
|
|
|
Home -> Sailboat -> Blocks->Wire Blocks
Single blocks can double the power of a rope tackle using a cascading block system. Blocks up to 1" sheave diameter are stainless steel with nickel-plated brass sheaves. Blocks over 1" sheave diameter have removable anodized aluminum sheaves with Delrin® bushings. Micro Kite Blocks are very strong, super-lightweight.
Part No: RF104
|
|
|
|
|
Home -> Sailboat -> Blocks->Wire Blocks
Single blocks can double the power of a rope tackle using a cascading block system. Blocks up to 1" sheave diameter are stainless steel with nickel-plated brass sheaves. Blocks over 1" sheave diameter have removable anodized aluminum sheaves with Delrin® bushings. Micro Kite Blocks are very strong, super-lightweight.
Part No: RF418
|
|
|
|
|
Home -> Sailboat -> Blocks->Wire Blocks
Single blocks can double the power of a rope tackle using a cascading block system. Blocks up to 1" sheave diameter are stainless steel with nickel-plated brass sheaves. Blocks over 1" sheave diameter have removable anodized aluminum sheaves with Delrin® bushings. Micro Kite Blocks are very strong, super-lightweight.
Part No: RF103
|
|
|
|
|
Home -> Sailboat -> Blocks->Wire Blocks
Single blocks can double the power of a rope tackle using a cascading block system. Blocks up to 1" sheave diameter are stainless steel with nickel-plated brass sheaves. Blocks over 1" sheave diameter have removable anodized aluminum sheaves with Delrin® bushings. Micro Kite Blocks are very strong, super-lightweight.
Part No: RF560
|
|
|
