Top Sellers
Flush Cup Door Latch from PERKO
Chrome plated zinc alloy with sliding lock button. For door thickness 3/4 to 1-1/8 inches. Supplied with black plastic spacer for surface mounting. Bevel/Strike Type: Regular w/Box. Case Dimensions: 2-1/8 x 1-3/4 .
|
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
|
Big-T Rotary Helm from TELEFLEX
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
|
|
Body Width 2", Vertical Clearance 1", Shackle Diameter 5/16" from ABUS LOCK COMPANY
Set your own easy-to-remember combination on these padlocks with four-pin tumblers. You set the combination using the key provided. All brass internal components and a stainless steel shackle for superior corrosion protection. Type: Combination . Combination Type: Reset-able four tumbler . Material: Brass body and internal components, solid stainless shackle .
|
Soy Shaker from JOHNSON PUMPS
PRP SpillBuster Soy is a unique 100% natural and biodegradable oil spill cleanup tool. It absorbs petroleum hydrocarbons, floats with the contamination on the surface and stimulates indigenous microbes to biodegrade the oil (and itself) into CO2 and water. PRP can be used to remediate contaminated soil as well. Simply sprinkle the PRP powder on the contaminated area and watch it disappear. No residue remains! Coverage: 100sq/ft per lb. at 1/16" thick.
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Anchor Safety Strap from LEWMAR
18" long stainless steel; PVC coated with 4" bolt, nut and snap link Fits 1/4", 5/16" and 3/8" chain.
|
Potable Water Holding Tank, 3 Gal. from TODD ENTERPRISES
1520) requirements. Standard Tanks feature a multiple port arrangement that enables use as a sanitation holding tank or for potable water storage. They include two 1 1/2" fill/drain ports and two 1/2" vent/supply ports. Designed for waste storage, each includes two 1 1/2" ports for inlet and drain and one 1/2" vent port. Both Standard and Heavy-Duty Tanks feature threaded NPT ports that are molded in to eliminate stress cracks and leaks. One year warranty.
|
500 RC Windlass, 600lb. Max. Pull, Boat Length 35', 1/4"HT Chain, 1/2" Rope Rode Size, 62'–Chain; 45'–Rope Speed Up/Min., 60' Speed Down/Min., 60A–75A @12V Draw from MAXWELL
These low-profile windlasses feature a patented tension system that maintains resistance required to feed chain/rope rode into the locker instead of jamming it in the windlass. Designed for easy installation, the motor can be oriented in any of 12 positions below decks. Two pieces bolt together quickly. Gasketed, watertight base. For decks to 2 3/4" thick. Capstan models and extra-long shafts for thick decks are available by Special Order. Style: Vertical . Rode Type: Rope/chain .
|
Vertical Sidelights, White from PERKO
For powerboats and sailboats less than 20m or 65. 6'. Plastic frames with ultrasonically welded lenses and gasketed plastic bases. 2nm visibility. Per pair, except bi-color. Case Material: Plastic . Case Dimensions: 3-1/2"L x 2-1/4"W x 13/16"H . Mounting Hardware: #8 FHMS (sold separately) . Volts: 12V . Draw: 0. 7A .
|
PowerPro Lower Unit Gear Lube from WEST MARINE
An 80W90 synthetic gear lube that protects high-performance lower units in extreme operating conditions. Highly recommended for engines over 100hp. Meets or exceeds API MT-1 and GL-5 ratings.
|
1/8" Single Braid, 2300lb. Breaking Strength, Green from SAMSON ROPE
The high-strength, low-stretch equivalent to wire rope with seven times less weight! Combined with flex-fatigue and service life durability, Amsteel 12-strand Dyneema SK-75 single braid can outlast wire rope and has none of the handling and safety issues associated with wire. Stretch: 0. 70% at 20% of breaking strength. Best Use: Cascade systems, replacements for wire halyards, tapered sheets, backstays, runners, checkstays and strong ultralight rigging . Construction: 12-strand single braid .
|
|
Cleat, 1, 1-1, 1-5, two 1, 16"H from SCHAEFER, 4"H from SCHAEFER
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
970
980
990
1,000
1,010
1,020
1,030
1,040
1,050
1,059
1,060
1,061
1,062
1,063
1,064
1,065
1,066
1,067
1,068
1,069
1,070
1,071
1,072
1,073
1,074
1,075
1,076
1,077
1,078
1,079
1,080
1,081
1,082
1,083
1,084
1,085
1,086
1,087
1,088
1,090
1,100
1,110
1,120
1,130
1,140
1,150
1,160
1,170
1,200
1,260
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats
We stock a complete selection of cleats for anchoring, docking and general-purpose use. Zinc cleats should be used in fresh water only.
Part No: 1316SPL001
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-80
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-94
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-98
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-96
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-79
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-06
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-08
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-16
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-14
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-95
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-10
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Bronze and Chromed Zinc Cleats
We recommend stainless or bronze cleats for use in fresh or salt water. Zinc and Zamak cleats should be used in fresh water only. We stock a complete selection of cleats for anchoring, docking and general-purpose use.
Part No: 230212
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Bronze and Chromed Zinc Cleats
We recommend stainless or bronze cleats for use in fresh or salt water. Zinc and Zamak cleats should be used in fresh water only. We stock a complete selection of cleats for anchoring, docking and general-purpose use.
Part No: 230112
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Chrome-Plated Zinc Teardrop Cleats
We stock a complete selection of cleats for anchoring, docking and general-purpose use. Zinc cleats should be used in fresh water only. Fasteners not included.
Part No: 0566DP2CHR
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Chrome-Plated Zinc Teardrop Cleats
We stock a complete selection of cleats for anchoring, docking and general-purpose use. Zinc cleats should be used in fresh water only. Fasteners not included.
Part No: 0566DP3CHR
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Chrome-Plated Zinc Teardrop Cleats
We stock a complete selection of cleats for anchoring, docking and general-purpose use. Zinc cleats should be used in fresh water only. Fasteners not included.
Part No: 0566DP4CHR
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Chrome-Plated Zinc Yacht Cleats
We stock a complete selection of clets for anchoring, docking and general-purpose use.
Part No: 1188DP8CHR
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Chrome-Plated Zinc Yacht Cleats
We stock a complete selection of clets for anchoring, docking and general-purpose use.
Part No: 1188DP6CHR
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Nylon Cleats->Forespar Marelon Cleats
High-strength, lightweight, low-cost Marelon® allows these cleats to take up the curve of your deck without breaking.
Part No: 941018
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Nylon Cleats->Nylon Cleats
Open base, glass-filled nylon cleats with two mounting holes. 3" cleat: 5/16 max line dia. , 9/16" Height, #8 FSTN. 4" cleat: 3/8 max line dia. , 3/4" Height, #8 FSTN. 5" cleat: 3/8 max line dia. , 1" Height, #10 FSTN. 6" cleat: 1/2 max line dia. , 1 1/4" Height, 1/4" FSTN. 8" cleat: 5/8 max line dia.
Part No: 81021
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Nylon Cleats->Nylon Cleats
Open base, glass-filled nylon cleats with two mounting holes. 3" cleat: 5/16 max line dia. , 9/16" Height, #8 FSTN. 4" cleat: 3/8 max line dia. , 3/4" Height, #8 FSTN. 5" cleat: 3/8 max line dia. , 1" Height, #10 FSTN. 6" cleat: 1/2 max line dia. , 1 1/4" Height, 1/4" FSTN. 8" cleat: 5/8 max line dia.
Part No: 81022
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Nylon Cleats->Nylon Cleats
Open base, glass-filled nylon cleats with two mounting holes. 3" cleat: 5/16 max line dia. , 9/16" Height, #8 FSTN. 4" cleat: 3/8 max line dia. , 3/4" Height, #8 FSTN. 5" cleat: 3/8 max line dia. , 1" Height, #10 FSTN. 6" cleat: 1/2 max line dia. , 1 1/4" Height, 1/4" FSTN. 8" cleat: 5/8 max line dia.
Part No: 81025
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Nylon Cleats->Nylon Cleats
Open base, glass-filled nylon cleats with two mounting holes. 3" cleat: 5/16 max line dia. , 9/16" Height, #8 FSTN. 4" cleat: 3/8 max line dia. , 3/4" Height, #8 FSTN. 5" cleat: 3/8 max line dia. , 1" Height, #10 FSTN. 6" cleat: 1/2 max line dia. , 1 1/4" Height, 1/4" FSTN. 8" cleat: 5/8 max line dia.
Part No: 81024
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Rope Clutches
Replacement handle for XAS Powerclutch sheetstopper.
Part No: XAS-HDL
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Rope Clutches
The XX Powerclutch holds 50% higher loads than any conventional clutch, yet is smooth and controlled to release. Optimized for high performance line 5/16" to 1/2", the XX is the only secure solution for genoa and spinnaker halyards on performance yachts 35-50ft. Easy on-deck access for removing complete internal assembly, and an access port for fresh water flushing make this a versatile and robust clutch. Dimensions: 3. Line Dia: 5/16" to 1/2" (8 to 12mm) .
Part No: XX0812
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Rope Clutches
Use XCS on yachts that require a higher safe working load and a more advanced release mechanism than the XAS. Aluminum sides for sustained high-load operation Use version XCS0608/1 for small diameter lines (6–8mm) or upgrade your current model with CAM-0608. Lock open cam available, allowing line to run freely in both directions with the handle in the closed position. Features and benefits: Alloy handle lever with soft end grip . For lines 8mm to 14mm (5/16" to 9/16").
Part No: XCS0814/1B
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Rope Clutches
.
Part No: XAS-BASE0408
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Rope Clutches
Cam Replacement & Upgrade Kits for XTS Powerclutches.
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Rope Clutches->Cam Replacement & Upgrade Kits for XTS Powerclutches
Cam Replacement & Upgrade Kits for XTS Powerclutches.
Part No: CAM-XAS
|
|
|