Top Sellers
|
|
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
CP Zinc Sliding Window Stop from PERKO
Chrome-plated zinc with plastic cover on stopping plate. . Base measures 3/4"W x 1 7/8"L. . Requires #8 fasteners (not included). . Stopping plate length: 1 1/2'' . Made in U. S. A.
|
Trapeze & Vang Cleat from CLAMCLEAT
The cleat has an in-built pulley that offers a compact solution for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock that is easy to release is required. The sailor's preferred choice for adjusting trapeze lines.
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
Gas Deck Fill, Locking from PERKO
Includes grounding lug with screw and integral retainer for cap For 1 1/2" hose Impervious to gasoline.
|
Mas Gelcoat Repair Kit, White from MAS EPOXY
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.
|
Rim Latch Sets - Reverse Bevel with Flush Strike from PERKO
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
|
|
|
CP Zinc Cupboard Catch from PERKO
Chrome-plated zinc. . Supplied with box strike. . Measures: 1 1/2"W x 1 7/8"L . Requires #6 fasteners (not included). Made in USA.
|
|
|
|
1, #1, Medium Turnbuckle Cover, Machine Swage Lifeline Adjuster, Range
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
990
1,000
1,010
1,020
1,030
1,040
1,050
1,060
1,070
1,078
1,079
1,080
1,081
1,082
1,083
1,084
1,085
1,086
1,087
1,088
1,089
1,090
1,091
1,092
1,093
1,094
1,095
1,096
1,097
1,098
1,099
1,100
1,101
1,102
1,103
1,104
1,105
1,106
1,107
1,110
1,120
1,130
1,140
1,150
1,160
1,170
1,180
1,190
1,200
1,260
|
|
|
Home -> Sailboat -> Rigging Products->Hi-MOD Compression Eyes
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 38CTE316
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Hi-MOD Compression Eyes
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 516CTE532
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Hi-MOD Compression Eyes
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 58CTE38
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Hi-MOD Compression Eyes
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 716CTE14
|
|
|
|
Home -> Sailboat -> Rigging Products->Hogrings for Shock Cord
Use these stainless steel rings to create loops in shock cord. Use pliers above to crimp.
Part No: C0183-0007-W
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Hogrings for Shock Cord
Use these stainless steel rings to create loops in shock cord. Use pliers above to crimp.
Part No: C0183-0008-W
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Hogrings for Shock Cord
Use these stainless steel rings to create loops in shock cord. Use pliers above to crimp.
Part No: C0183-0013-W
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Hogrings for Shock Cord
Use these stainless steel rings to create loops in shock cord. Use pliers above to crimp.
Part No: C0183-0005-W
|
|
|
|
Home -> Sailboat -> Rigging Products->Hollow Fids
The tapered stainless body of this fine fid gently opens the strands of nylon line, leaving you with a hole through which you can pass the strand. The rounded end allows you to put pressure on tightly laid lines.
Part No: C540
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Hollow Fids
The tapered stainless body of this fine fid gently opens the strands of nylon line, leaving you with a hole through which you can pass the strand. The rounded end allows you to put pressure on tightly laid lines.
Part No: C541
|
|
|
|
Home -> Sailboat -> Rigging Products->Integral Hydraulic Backstay Adjusters
Self-contained hydraulic adjusters feature a longer pump handle that produces a faster pumping motion and more tension per stroke to accommodate modern masts. A built-in gauge is located where it’s easy to read tension values in psi. Includes a single-action pump and leak-free extruded aluminum housing. Overload relief valve saves the rig from overzealous crew. Easy to install, since a remote pump and hose are not required.
Part No: A370-LE-017
|
|
|
|
Home -> Sailboat -> Rigging Products->Jib Hanks
Use a mallet to gently bend the arm in place.
Part No: C0169-0001-W
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Jib Hanks
Use a mallet to gently bend the arm in place.
Part No: C0169-0002-W
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Jib Hanks
Use a mallet to gently bend the arm in place.
Part No: C0169-0000-W
|
|
|
|
Home -> Sailboat -> Rigging Products->Leather Turnbuckle Covers
Add a distinctive look and chafe protection, too. Natural gray leather attaches and removes easily with hook-and-loop strips.
Part No: 1405-14
|
|
|
|
Home -> Sailboat -> Rigging Products->Lev-O-Gage Clinometers
The perfect device for attaining an optimum angle of heel. Black bodies with flex tubes and white engraved numerals and an easy-to-read scale.
Part No: 303-M
|
|
|
|
Home -> Sailboat -> Rigging Products->Lifeline Adjusters
Take up slack at a gate, or at the end of a long run.
Part No: 23-303
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Lifeline Adjusters
Take up slack at a gate, or at the end of a long run.
Part No: 24-303
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Lifeline Adjusters
Take up slack at a gate, or at the end of a long run.
Part No: 27-406
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Lifeline Adjusters
Take up slack at a gate, or at the end of a long run.
Part No: 31-606
|
|
|
|
|
Home -> Sailboat -> Rigging Products -> Rigging Terminals->Lifeline Adjusters
Take up slack at a gate, or at the end of a long run. Knurled adjustment knob with lock nut. .
Part No: 26-406
|
|
|
|
Home -> Sailboat -> Rigging Products->Lightknives Illuminated Rigging Knife
Never cut in the dark again . carry a Lightknife! It's dark, your hands are full and there's no way to hold a flashlight. Good thing your rigging knife has its own headlight! Just push the button on this Myerchine Light Knife and a bright red LED illuminates the blade and your work. The light is bright enough to let you read a chart 30 inches away, but because it's red it interferes less with your natural night vision. Secures to your belt or lifejacket with included clip. Lifetime warranty.
Part No: L377P
|
|
|
|
Home -> Sailboat -> Rigging Products->Line Terminator End Fittings
Line Terminator™ end fittings are the only spliceable, lashable, and pinable end fittings available that meet Hampidjan's recommended 5/1 bending ratio for Dynex Dux. This is essential for long-term durabilty of Heat-Stretched, Dynex Dux, UHMWPE line, as the work hardening makes the line much stiffer and tight bending radii cause compressive stresses that weaken the line considerably.
Part No: CSS72BLK
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Line Terminator End Fittings
Line Terminator™ end fittings are the only spliceable, lashable, and pinable end fittings available that meet Hampidjan's recommended 5/1 bending ratio for Dynex Dux. This is essential for long-term durabilty of Heat-Stretched, Dynex Dux, UHMWPE line, as the work hardening makes the line much stiffer and tight bending radii cause compressive stresses that weaken the line considerably.
Part No: CSS71BLK
|
|
|
|
Home -> Sailboat -> Rigging Products->Long Lifeline Adjusters
Extra-long for wider range of adjustment. Knurled adjustment knob with lock nut.
Part No: 23-302
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Long Lifeline Adjusters
Extra-long for wider range of adjustment. Knurled adjustment knob with lock nut.
Part No: 30-604
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Long Lifeline Adjusters
Extra-long for wider range of adjustment. Knurled adjustment knob with lock nut.
Part No: 35-623
|
|
|
|
Home -> Sailboat -> Rigging Products->Marine Swage Eyes
Used to connect wire to fittings with clevis pins, like mast terminals, forks, double jaw turnbuckles, etc. Type 316 stainless.
Part No: ME10
|
|
|
|
Home -> Sailboat -> Rigging Products->Marine Tubular Turnbuckles
No need for unsightly turnbuckle boots or messy rigging tape. Locking hex nuts replace sharp cotter pins on these streamlined all stainless steel turnbuckles. An integral toggle jaw maintains rigging alignment. Professional roller swaging is recommended for swage models. Made in U. S.
Part No: C0783-0007
|
|
|
|
Home -> Sailboat -> Rigging Products->Mechanical Backstay & Babystay Adjusters
These stay adjusters are easy to adjust using a large-diameter, hand-turned wheel. Constructed of stainless steel with a synthetic wheel. Affords about 6-3/4" of travel. Backstay adjuster features a 1/2" pin dia. Toggle jaw at each end. The babystay adjuster features a rugged pelican hook at the bottom for easy attachment, and a D shackle at the top. Safe Working Load: 7,700lb. functional load limit.
Part No: 5526
|
|
|
