Top Sellers
|
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
|
|
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
Vertical Sidelights, White from PERKO
For powerboats and sailboats less than 20m or 65. 6'. Plastic frames with ultrasonically welded lenses and gasketed plastic bases. 2nm visibility. Per pair, except bi-color. Case Material: Plastic . Case Dimensions: 3-1/2"L x 2-1/4"W x 13/16"H . Mounting Hardware: #8 FHMS (sold separately) . Volts: 12V . Draw: 0. 7A .
|
CP Zinc Elbow Catch from PERKO
Chrome-plated zinc with stainless steel spring. . Measures: 1 1/8" x 9/16" . Requires #6 RH screws (Not included).
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
CP Zinc Cupboard Catch from PERKO
Chrome-plated zinc. . Supplied with box strike. . Measures: 1 1/2"W x 1 7/8"L . Requires #6 fasteners (not included). Made in USA.
|
CP Bronze Strap Hinge - 1.125" H x 6" W from PERKO
Chrome plated bronze. Pin Height: 1-1/8" by 6" open width. Each hinge requires six #10 fasteners.
|
Brass-Bristle Brush from SEAFIT
Solid brass bristles won't rust or corrodeLarge, plastic utility brush has solid brass bristles that won’t rust or corrode. Brass bristles are slightly softer than stainless steel and are therefore less intrusive to surfaces. Molded plastic handle provides solid, controlled grip. Bristles: 5/8"D. Overall length: 8 1/2". Molded plastic handle provides solid, controlled grip. 5/8"L bristles.
|
Rim Latch Sets - Reverse Bevel with Flush Strike from PERKO
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
|
|
|
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
|
|
1, 1-1, 16" from JOHNSON, 16"ID from RWO USA, 8" from JOHNSON, 1-3
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,010
1,020
1,030
1,040
1,050
1,060
1,070
1,080
1,090
1,098
1,099
1,100
1,101
1,102
1,103
1,104
1,105
1,106
1,107
1,108
1,109
1,110
1,111
1,112
1,113
1,114
1,115
1,116
1,117
1,118
1,119
1,120
1,121
1,122
1,123
1,124
1,125
1,126
1,127
1,130
1,140
1,150
1,160
1,170
1,180
1,190
1,200
1,210
1,260
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Round Base Stainless-Steel Pad Eyes
Round pad eyes are measured inside hole to inside hole, not across the middle (not shown). Diamond pad eyes are measured on the long axis (A), followed by the narrow axis (B). Some models have slight variations due to imprecise machining when countersinking. MFR Desc Base SW Inside Fasteners Hole Centers A Hole Centers B A. 78-07 Heavy Duty Round Base 2 1/2" dia. with 3/8" bail 5,000 1" x 13/16" four 1/4" FHMS 1 1/2" 1 11/16" B.
Part No: 78-95
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->RWO Deck Bushings - Black
Well flared top and bottom for easy running of control lines. Acetal resin.
Part No: R3134
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->RWO Deck Bushings - Black
Well flared top and bottom for easy running of control lines. Acetal resin.
Part No: R3114
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->RWO Deck Bushings - Black
Well flared top and bottom for easy running of control lines. Acetal resin.
Part No: PNP54A
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->RWO Deck Bushings - Black
Well flared top and bottom for easy running of control lines. Acetal resin.
Part No: PNP39B
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->RWO Deck Bushings - Black
Well flared top and bottom for easy running of control lines. Acetal resin.
Part No: PNP39A
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->RWO Deck Bushings - Black
Well flared top and bottom for easy running of control lines. Acetal resin.
Part No: R3044
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->RWO Deck Bushings - Black
Well flared top and bottom for easy running of control lines. Acetal resin.
Part No: R3034
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Self Aligning Bullseye Fairleads
Self-aligning control line guides for foredeck and cabin-top applications is a new low-profile solution for ensuring a clean and organized deck. Single screw installation allows bullseye to align to the load.
Part No: BE12
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Stainless Boom Bails
Forged stainless construction. Fastener diameters are shown.
Part No: RF181
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Stainless Boom Bails
Forged stainless construction. Fastener diameters are shown.
Part No: RF180
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Stainless Eye Straps
Eye straps form light duty mounting bases for blocks, serve as lash-down points, and can provide a fairlead on a cam cleat to hold the line at the cleat. The 201 is a low-profile cleat that fits line to 5/16". Large eye strap #282: fastener spacing = 2-1/16", Fits cam #280. Eye strap #137: fastener spacing = 1-1/2", Fits cam #150/365. Low-profile eye strap #201: fastener spacing = 1-1/2", Fits cam #150/365.
Part No: 282
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Stainless Folding Pad Eyes
These pad eyes fold up when you need them and down when you don’t! Ideal for lifting eyes on trailerable boats, foredeck pad eyes for staysail tacks, foreguys and jacklines. Requires three flathead bolts or machine screws. A friction lock keeps them up while in use. Forged 17. 4PH for greater strength.
Part No: 6504
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Stainless Folding Pad Eyes
These pad eyes fold up when you need them and down when you don’t! Ideal for lifting eyes on trailerable boats, foredeck pad eyes for staysail tacks, foreguys and jacklines. Requires three flathead bolts or machine screws. A friction lock keeps them up while in use. Forged 17. 4PH for greater strength.
Part No: 6506
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Stainless-Steel Chain Plates
1" and 1-1/4" sizes are flat with four fastener holes. 1 1/2" size is formed (bent) with five fastener holes. Type 304 stainless-steel.
Part No: 84-87
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Stainless-Steel Chain Plates
1" and 1-1/4" sizes are flat with four fastener holes. 1 1/2" size is formed (bent) with five fastener holes. Type 304 stainless-steel.
Part No: 84-80
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Stainless-Steel Eye Straps
Eye straps are convenient for lashing points and attaching control line leads or blocks.
Part No: 281
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Stanchion Mounted Bullseye Fairleads
Mount without drilling on stanchion or base from 7/8" to1" diameter. Deluxe model has a stainless steel-bushed bulls-eye to minimize friction. Easily installs with clamp. No need to drill holes.
Part No: 40-503
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Stanchion Mounted Bullseye Fairleads
Mount without drilling on stanchion or base from 7/8" to1" diameter. Deluxe model has a stainless steel-bushed bulls-eye to minimize friction. Easily installs with clamp. No need to drill holes.
Part No: 40-501
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Stanchion Mounted Bullseye Fairleads
Mount without drilling on stanchion or base from 7/8" to1" diameter. Deluxe model has a stainless steel-bushed bulls-eye to minimize friction. Easily installs with clamp. No need to drill holes.
Part No: 40-502
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Toe Rail Pad Eyes
Designed to protect toerails from damage by spreading the load applied by snap shackles and snatch blocks. Unscrewing the unit partially allows it to slide quickly from hole to hole; unscrewing it entirely permits removal. Articulates through 150°. Drop-forged stainless with silicone insert. 9/16"dia. eye. Toerails must be at least 1-9/16"H with a 5/16"–1/2"dia. lip. Fits symmetric or asymmetric toe rails.
Part No: 16615
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Toe Rail Pad Eyes
Designed to protect toerails from damage by spreading the load applied by snap shackles and snatch blocks. Unscrewing the unit partially allows it to slide quickly from hole to hole; unscrewing it entirely permits removal. Articulates through 150°. Drop-forged stainless with silicone insert. 9/16"dia. eye. Toerails must be at least 1-9/16"H with a 5/16"–1/2"dia. lip. Fits symmetric or asymmetric toe rails.
Part No: 16614
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Toe Rail Pad Eyes
Designed to protect toerails from damage by spreading the load applied by snap shackles and snatch blocks. Unscrewing the unit partially allows it to slide quickly from hole to hole; unscrewing it entirely permits removal. Articulates through 150°. Drop-forged stainless with silicone insert. 9/16"dia. eye. Toerails must be at least 1-9/16"H with a 5/16"–1/2"dia. lip. Fits symmetric or asymmetric toe rails.
Part No: 16613
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Shackle Guards & Pulls
Strong, drop-forged shackle key/bottle opener.
Part No: 10303
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Shackle Guards & Pulls
Open shackles, open bottles, and drive screws with a single stamped stainless steel tool.
Part No: M1800020
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Shackle Guards & Pulls
Ultra-light FID Beautifully machined in alloy. Half the weight of traditional spikes. Sized for snap shackles up to Tylaska T-20. Knurled hand grip designed for safe control at high loads. Lanyard attachment hole.
Part No: DW-FID
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Shackle Guards & Pulls->Hiking Strap Plates
Stainless steel hiking strap plates.
Part No: R2870
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Shackle Guards & Pulls->Hiking Strap Plates
Stainless steel hiking strap plates.
Part No: R2880
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Snap Shackles
Attaches directly to the shackle post on 2-1/4", 3" and fiddle blocks. Includes a stand-up spring. Snap dimensions: 3/4" x 1".
Part No: 111
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Snap Shackles
For blocks with 1/4" shackle pin. 3-3/8"L (excluding spring). 1,500lb. max.
Part No: 112
|
|
|
