Top Sellers
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
|
Flush Cup Door Latch from PERKO
Chrome plated zinc alloy with sliding lock button. For door thickness 3/4 to 1-1/8 inches. Supplied with black plastic spacer for surface mounting. Bevel/Strike Type: Regular w/Box. Case Dimensions: 2-1/8 x 1-3/4 .
|
1-1/2" Traveler Track End Stop from SCHAEFER
Stop-End Traveler 1. 5in|Stop-End Traveler 1.
|
|
|
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
WL/1 Fairlead Model from SPINLOCK
New low-profile design easily mounts to 1" stanchion using internal clamping system. WL/2 sheave model utilizes unique tracker ball angle adjustment. WL/1 Fairlead model includes stainless-steel bullseye for strength.
|
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
1-7/8" Brass Standard Hasp from ABI
Highly polished brass . Fixed eye (does not swivel). 1"w x 1-7/8"L. Padlock hole diameter 5/16" .
|
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
|
|
|
Braided Polyester Cord, by the Foot from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Sold by the foot. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .
|
Diamond Pad Eye 3-1/4" from SUNCOR
Diamond Pad Eyes. Heavy-Duty, one-piece precision casting.
|
Yamaha Outboard 1984-1996, 1-4 Cyl., V4, V6, 2-250 HP from SELOC PUBLICATIONS
Designed and written to serve the needs of the professional mechanic, do-it-yourself boat enthusiast, instructor and student, these manuals are based on actual teardowns done by Seloc’s editors/authors in our on-site facility. This repair manual covers all Yamaha outboard engines, 12-250 HP, 1-4 cylinder, V4, V6 models, 1990 to 2001. Every manual features: Easy-to-follow, step-by-step, illustrated procedures . Hundreds of exploded drawings, photographs and tables . Troubleshooting sections .
|
50' Braided Polyester Cord from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Length: 50'. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .
|
|
1, 1", 1, 1-1, 1 Purchase from HARKEN, SWL from HARKEN, Fits 1-1
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,030
1,040
1,050
1,060
1,070
1,080
1,090
1,100
1,110
1,122
1,123
1,124
1,125
1,126
1,127
1,128
1,129
1,130
1,131
1,132
1,133
1,134
1,135
1,136
1,137
1,138
1,139
1,140
1,141
1,142
1,143
1,144
1,145
1,146
1,147
1,148
1,149
1,150
1,151
1,160
1,170
1,180
1,190
1,200
1,210
1,220
1,230
1,260
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Car Controls
For use on offshore boats from 32’–65’. Torlon® bearings and pivoting shackles for non-vertical loads.
Part No: 659
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Traveler Cars & Accessories
Big Boat Captive Ball Traveler Cars are built to handle high loads on boats from 32 to 50 ft. , and up to 70ft. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle/toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system.
Part No: 3165
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Traveler Cars & Accessories
Big Boat Captive Ball Traveler Cars are built to handle high loads on boats from 32 to 50 ft. , and up to 70ft. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle/toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system.
Part No: 3164
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Traveler Cars & Accessories
Big Boat Captive Ball Traveler Cars are built to handle high loads on boats from 32 to 50 ft. , and up to 70ft. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle/toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system.
Part No: 3170
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Traveler Cars & Accessories
Big Boat Captive Ball Traveler Cars are built to handle high loads on boats from 32 to 50 ft. , and up to 70ft. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle/toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system.
Part No: 3163
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Traveler Cars & Accessories
Big Boat Captive Ball Traveler Cars are built to handle high loads on boats from 32 to 50 ft. , and up to 70ft. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle/toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system.
Part No: 3166
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Traveler Cars & Accessories
Big Boat Captive Ball Traveler Cars are built to handle high loads on boats from 32 to 50 ft. , and up to 70ft. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle/toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system.
Part No: 3176
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Traveler Cars & Accessories
Big Boat Captive Ball Traveler Cars are built to handle high loads on boats from 32 to 50 ft. , and up to 70ft. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle/toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system.
Part No: 3180
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Traveler Cars & Accessories
Big Boat Captive Ball Traveler Cars are built to handle high loads on boats from 32 to 50 ft. , and up to 70ft. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle/toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system.
Part No: 3169
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Traveler Cars & Accessories
Big Boat Captive Ball Traveler Cars are built to handle high loads on boats from 32 to 50 ft. , and up to 70ft. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle/toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system.
Part No: 3177
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Traveler Cars & Accessories
The one-piece solid aluminum construction is lightweight and strong. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race for smooth trimming or easing. Pivoting shackle/toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system. The toggle serves as a stand-up for the mainsheet block. Big Boat End Controls allow use of 2:1 to 4:1 purchases.
Part No: 3179
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Traveler Cars & Accessories
Big Boat Captive Ball Traveler Cars are built to handle high loads on boats from 32 to 50 ft. , and up to 70ft. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle/toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system.
Part No: 3174
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Traveler Cars & Accessories
Big Boat Captive Ball Traveler Cars are built to handle high loads on boats from 32 to 50 ft. , and up to 70ft. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle/toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system.
Part No: 3173
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Traveler Cars & Accessories
Big Boat Captive Ball Traveler Cars are built to handle high loads on boats from 32 to 50 ft. , and up to 70ft. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle/toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system.
Part No: 3168
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Traveler Cars & Accessories
Big Boat Captive Ball Traveler Cars are built to handle high loads on boats from 32 to 50 ft. , and up to 70ft. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle/toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system.
Part No: 3167
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Traveler Cars & Accessories
Big Boat Captive Ball Traveler Cars are built to handle high loads on boats from 32 to 50 ft. , and up to 70ft. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle/toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system.
Part No: 3160
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Traveler Cars & Accessories
Big Boat Captive Ball Traveler Cars are built to handle high loads on boats from 32 to 50 ft. , and up to 70ft. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle/toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system.
Part No: 3161
|
|
![Jib Lead with Bullseye & Swivel, Port from HARKEN]( "Jib Lead with Bullseye & Swivel, Port from HARKEN")
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Dinghy/Small Boat Jib Leads
For dinghies and small sportboats with jibs to 140sq. For the ultimate lightweight system, lash on the 2651 Ti-Lite (Model 1171412). Use the bullseye car for gradual turns. The jib lead/bullseye/swivel combo (452P/452S) has a controlled pivot angle so the cleat is always within easy reach, and features a 356 Carbo-Cam on a lightweight aluminum cam arm. Boat Size: Dinghies/ small sportboats, jibs to 140 sq. Cam: 57° cam arm rotation . Cleat Type: 365 Carbo-Cam with 424B Flairlead, #10 FHMS .
Part No: 452P
|
|
![Jib Lead with Eyestrap from HARKEN]( "Jib Lead with Eyestrap from HARKEN")
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Dinghy/Small Boat Jib Leads
For dinghies and small sportboats with jibs to 140sq. For the ultimate lightweight system, lash on the 2651 Ti-Lite (Model 1171412). Use the bullseye car for gradual turns. The jib lead/bullseye/swivel combo (452P/452S) has a controlled pivot angle so the cleat is always within easy reach, and features a 356 Carbo-Cam on a lightweight aluminum cam arm. Boat Size: Dinghies/ small sportboats, jibs to 140 sq. Cam: 57° cam arm rotation . Cleat Type: 365 Carbo-Cam with 424B Flairlead, #10 FHMS .
Part No: 450
|
|
![Jib Lead with Bullseye from HARKEN]( "Jib Lead with Bullseye from HARKEN")
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Dinghy/Small Boat Jib Leads
For dinghies and small sportboats with jibs to 140sq. For the ultimate lightweight system, lash on the 2651 Ti-Lite (Model 1171412). Use the bullseye car for gradual turns. The jib lead/bullseye/swivel combo (452P/452S) has a controlled pivot angle so the cleat is always within easy reach, and features a 356 Carbo-Cam on a lightweight aluminum cam arm. Boat Size: Dinghies/ small sportboats, jibs to 140 sq. Cam: 57° cam arm rotation . Cleat Type: 365 Carbo-Cam with 424B Flairlead, #10 FHMS .
Part No: 451
|
|
![Small Boat Pinstop Slider Car, Starboard from HARKEN]( "Small Boat Pinstop Slider Car, Starboard from HARKEN")
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Dinghy/Small Boat Jib Leads
For dinghies and small sportboats with jibs to 140sq. For the ultimate lightweight system, lash on the 2651 Ti-Lite (Model 1171412). Use the bullseye car for gradual turns. The jib lead/bullseye/swivel combo (452P/452S) has a controlled pivot angle so the cleat is always within easy reach, and features a 356 Carbo-Cam on a lightweight aluminum cam arm. Boat Size: Dinghies/ small sportboats, jibs to 140 sq. Cam: 57° cam arm rotation . Cleat Type: 365 Carbo-Cam with 424B Flairlead, #10 FHMS .
Part No: 393S
|
|
![Small Boat Pinstop Slider Car, Port from HARKEN]( "Small Boat Pinstop Slider Car, Port from HARKEN")
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Dinghy/Small Boat Jib Leads
For dinghies and small sportboats with jibs to 140sq. For the ultimate lightweight system, lash on the 2651 Ti-Lite (Model 1171412). Use the bullseye car for gradual turns. The jib lead/bullseye/swivel combo (452P/452S) has a controlled pivot angle so the cleat is always within easy reach, and features a 356 Carbo-Cam on a lightweight aluminum cam arm. Boat Size: Dinghies/ small sportboats, jibs to 140 sq. Cam: 57° cam arm rotation . Cleat Type: 365 Carbo-Cam with 424B Flairlead, #10 FHMS .
Part No: 393P
|
|
![Midrange Pinstop Slider Car with Tang, Port from HARKEN]( "Midrange Pinstop Slider Car with Tang, Port from HARKEN")
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Dinghy/Small Boat Jib Leads
For dinghies and small sportboats with jibs to 140sq. Use the bail on the 450 with a spring and block. For the ultimate lightweight system, lash on the 2651 Ti-Lite (Model 1171412). Use the bullseye car for gradual turns. The jib lead/bullseye/swivel combo (452P/452S) has a controlled pivot angle so the cleat is always within easy reach, and features a 356 Carbo-Cam on a lightweight aluminum cam arm. . Cam: 57° cam arm rotation . Cleat Type: 365 Carbo-Cam with 424B Flairlead, #10 FHMS .
Part No: 1639P
|
|
![Midrange Pinstop Slider Car with Tang, Starboard from HARKEN]( "Midrange Pinstop Slider Car with Tang, Starboard from HARKEN")
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Dinghy/Small Boat Jib Leads
For dinghies and small sportboats with jibs to 140sq. For the ultimate lightweight system, lash on the 2651 Ti-Lite (Model 1171412). Use the bullseye car for gradual turns. The jib lead/bullseye/swivel combo (452P/452S) has a controlled pivot angle so the cleat is always within easy reach, and features a 356 Carbo-Cam on a lightweight aluminum cam arm. Boat Size: Dinghies/ small sportboats, jibs to 140 sq. Cam: 57° cam arm rotation . Cleat Type: 365 Carbo-Cam with 424B Flairlead, #10 FHMS .
Part No: 1639S
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->End Stops for T-Track
Protect your feet with these plastic tapered stops.
Part No: 74-35-G
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Genoa Track Slides
Ronstan’s stainless steel slides come with tough plastic inserts which keep the car from scarring the track, while making it easier to move the car. Spring-loaded adjustment pins for fast, positive positioning . Semicircular bails . Slides for 1" track are typically used on boats to 26' . Slides for 1-1/4" track are typically used on boats to 40' .
Part No: RC73202
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Micro-Captive Ball Traveler Cars & Track
Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Sculpted car bodies reduce weight. Low-profile Micro CB track is fully-saturated Hardkote–anodized for toughness and scratch-resistance. Low-profile, line-shedding endstop absorbs sudden shock loads that can occur during unintentional jibes. Application: Mainsheet cars. Vangs on small dinghies. Controls on small keelboats.
Part No: 2707.600MM
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Micro-Captive Ball Traveler Cars & Track
Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Sculpted car bodies reduce weight. Low-profile Micro CB track is fully-saturated Hardkote–anodized for toughness and scratch-resistance. Low-profile, line-shedding endstop absorbs sudden shock loads that can occur during unintentional jibes. Application: Mainsheet cars. Vangs on small dinghies. Controls on small keelboats.
Part No: 2706
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Micro-Captive Ball Traveler Cars & Track
Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Sculpted car bodies reduce weight. Low-profile Micro CB track is fully-saturated Hardkote–anodized for toughness and scratch-resistance. Low-profile, line-shedding endstop absorbs sudden shock loads that can occur during unintentional jibes. Application: Mainsheet cars. Vangs on small dinghies. Controls on small keelboats.
Part No: 2704
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Micro-Captive Ball Traveler Cars & Track
Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Sculpted car bodies reduce weight. Low-profile Micro CB track is fully-saturated Hardkote–anodized for toughness and scratch-resistance. Low-profile, line-shedding endstop absorbs sudden shock loads that can occur during unintentional jibes. Application: Mainsheet cars. Vangs on small dinghies. Controls on small keelboats.
Part No: 2707.1M
|
|
|
