Top Sellers
1-1/2" Traveler Track End Stop from SCHAEFER
Stop-End Traveler 1. 5in|Stop-End Traveler 1.
|
SeaStar Helm Seal Kit from TELEFLEX
Replacement shaft seal kit HS5176 fits various post-1990 SeaStar 1. 4, 1. 7 (I), 2. 0, 2. 4 (II), SeaStar Pro and SeaStar helms.
|
|
|
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
Aft-Deck Shower System from ATTWOOD
This compact hot/cold shower stores neatly in its own compartment on the stern or in the head. Includes a handheld shower spray head with shutoff, 6' hose, hot/cold water controls and a cover. Easily hooked into your freshwater system. Compartment is drilled for six #8 fasteners. Material: High-impact plastic . Dimensions: 9-1/2"H x 5"W x 2-1/4"D . Hose Size: 6'L . Port Sizes: 1/2" NPT .
|
Surface-Mount Titan Bilge Pump from WHALE PUMPS
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".
|
Gusher MKIII Cabinet-Mount Foot Pump, Right-Handed from WHALE PUMPS
This surface-mounted pump can be placed inside or outside a locker. Discharges on each stroke and self-primes (to 7' max. height). Offered in “Right” and “Left” configurations to suit installation clearance requirements. For freshwater or saltwater. gpm: 4. 3 . Dimensions: 5-1/8"H x 5"W x 3-5/8"L (excludes 4-1/8" foot pedal) .
|
Rule-A-Matic Plus Float Switch from RULE INDUSTRIES
Is the float switch working? It's easy to check! Features a Rule-A-Matic float switch and an impact-resistant cover to protect against debris and jamming. Wiring is "blocked" by a rubber grommet to provide strain relief. Includes a convenient feature for manual tests. Activation Method: Float with mechanical contacts. Dimensions: 2-3/4"H x 2-1/2"W x 4-7/8"L. Capacity: 20A @ 12/24/32V DC.
|
CP Zinc Cupboard Catch from PERKO
Chrome-plated zinc. . Supplied with box strike. . Measures: 1 1/2"W x 1 7/8"L . Requires #6 fasteners (not included). Made in USA.
|
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
|
Gusher 10 Pump from WHALE PUMPS
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .
|
Shower/Mixer Faucet Combo from SHURFLO
This shower mixer has a water conservation button built-in to the handle. Chrome-plated with an easy grip handle, ceramic disc valves and 72" retractable hose. Includes flexible 1/2" NPT connection hoses for easy installation. Material: Brass . Dimensions: 6"H x 6-3/8"W x 7-1/4"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" . Cutout Size: 2-1/2". Manufacturer's Documents Installation Guidelines.
|
1'' Transom Drain W/Plug from BECKSON MARINE INC
All-nylon drain and plug with a plastic retainer and O-ring.
|
VC-Offshore - Baltoplate Gray, Gallon from INTERLUX
Used by performance boatsVC Offshore combines superior antifouling performance with a super smooth low friction surface for the performance conscious boater. This high-strength, vinyl antifouling paint, fortified with Teflon® yields a hard, very smooth finish for maximum durability, reduced friction and increased performance. High copper loading fights fouling on performance boats in saltwater. Can be used in fresh, salt and brackish waters. Should not be applied over non-vinyl bottom paints.
|
Panel Mount Thermal Circuit Breaker, 50A from BLUE SEA SYSTEMS
An economical solution for high amperage loads where dependability is required in marine environments. Waterproof and ignition-protected (conforming to SAE J1171) so these circuit breakers are safe for installation aboard gasoline-powered boats. Ideal for branch circuits, windlasses, inverters and watermakers. False-trip free—designed to trip when subjected to a fault current. Available in panel and surface mounts. Interrupt Rating: 3000A at 12V DC. Voltage Compatibility: 42V DC.
|
|
1, 1-1, Track, 1" x 4', FH Fasteners from SCHAEFER, 1" x 8'
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,030
1,040
1,050
1,060
1,070
1,080
1,090
1,100
1,110
1,123
1,124
1,125
1,126
1,127
1,128
1,129
1,130
1,131
1,132
1,133
1,134
1,135
1,136
1,137
1,138
1,139
1,140
1,141
1,142
1,143
1,144
1,145
1,146
1,147
1,148
1,149
1,150
1,151
1,152
1,160
1,170
1,180
1,190
1,200
1,210
1,220
1,230
1,260
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Micro-Captive Ball Traveler Cars & Track
Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Sculpted car bodies reduce weight. Low-profile Micro CB track is fully-saturated Hardkote–anodized for toughness and scratch-resistance. Low-profile, line-shedding endstop absorbs sudden shock loads that can occur during unintentional jibes. Application: Mainsheet cars. Vangs on small dinghies. Controls on small keelboats.
Part No: 2703
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Micro-Captive Ball Traveler Cars & Track
Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Sculpted car bodies reduce weight. Low-profile Micro CB track is fully-saturated Hardkote–anodized for toughness and scratch-resistance. Low-profile, line-shedding endstop absorbs sudden shock loads that can occur during unintentional jibes. Application: Mainsheet cars. Vangs on small dinghies. Controls on small keelboats.
Part No: 2701
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Micro-Captive Ball Traveler Cars & Track
Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Sculpted car bodies reduce weight. Low-profile Micro CB track is fully-saturated Hardkote–anodized for toughness and scratch-resistance. Low-profile, line-shedding endstop absorbs sudden shock loads that can occur during unintentional jibes. Application: Mainsheet cars. Vangs on small dinghies. Controls on small keelboats.
Part No: 2700
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Micro-Captive Ball Traveler Cars & Track
Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Sculpted car bodies reduce weight. Low-profile Micro CB track is fully-saturated Hardkote–anodized for toughness and scratch-resistance. Low-profile, line-shedding endstop absorbs sudden shock loads that can occur during unintentional jibes. Application: Mainsheet cars. Vangs on small dinghies. Controls on small keelboats.
Part No: 2710
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Micro-Captive Ball Traveler Cars & Track
Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Sculpted car bodies reduce weight. Low-profile Micro CB track is fully-saturated Hardkote–anodized for toughness and scratch-resistance. Low-profile, line-shedding endstop absorbs sudden shock loads that can occur during unintentional jibes. Application: Mainsheet cars. Vangs on small dinghies. Controls on small keelboats.
Part No: 2705
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Micro-Captive Ball Traveler Cars & Track
Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Sculpted car bodies reduce weight. Low-profile Micro CB track is fully-saturated Hardkote–anodized for toughness and scratch-resistance. Low-profile, line-shedding endstop absorbs sudden shock loads that can occur during unintentional jibes. Application: Mainsheet cars. Vangs on small dinghies. Controls on small keelboats.
Part No: 2720.2.5M
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Midrange CB Trim Caps (Set)
Midrange High & Low Beam Trim Caps.
Part No: 1622
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Sail Track
Type 304 stainless steel. Hole spacing: 2-3/4" on center.
Part No: 75-05-144 inch
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Sail Track
Type 304 stainless steel. Hole spacing: 2-3/4" on center.
Part No: 75-07-72 inch
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Sail Track
Type 304 stainless steel. Hole spacing: 2-3/4" on center.
Part No: 75-05-72 inch
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Sail Track Stops
Stainless-steel end stops protect your sails.
Part No: 74-45
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Sail Track Stops
Stainless-steel end stops protect your sails.
Part No: 74-42
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Sailkote Dry Lubricants
"Makes Laser outhauls actually work. Folks use McLube for the most bizarre range of applications, and it works great on sail tracks, travelers and most of the moving parts on a boat. Reduces friction, abrasion, drag, and water absorption on all treated surfaces. Use on mast track, traveler cars and blocks to reduce friction, even under load. Dries quickly & bonds tightly to any surface . Use on sails to repel water and dirt . Use on hulls to reduce drag and waterline deposits.
Part No: SAILKOTE GAL
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Series 25 Jib Lead System
Composite slide bodies with plunger stops run on anodised aluminium track, and allow quick and easy manual adjustment. Composite jib lead cars continue the design philosophy of the award-winning Ronstan BB and RT Orbit Blocks™, with virtually all metal components now replaced with high-tech polymers and fibre equivalents. Integrated Functionality The clever 2-piece car body is moulded from a composite material that delivers low friction on the alloy track without the need for separate inserts.
Part No: RC72537
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Series 25 Jib Lead System
Composite slide bodies with plunger stops run on anodised aluminium track, and allow quick and easy manual adjustment. Composite jib lead cars continue the design philosophy of the award-winning Ronstan BB and RT Orbit Blocks™, with virtually all metal components now replaced with high-tech polymers and fibre equivalents. Integrated Functionality The clever 2-piece car body is moulded from a composite material that delivers low friction on the alloy track without the need for separate inserts.
Part No: RC72504
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Series 25 Jib Lead System
Composite slide bodies with plunger stops run on anodised aluminium track, and allow quick and easy manual adjustment. Composite jib lead cars continue the design philosophy of the award-winning Ronstan BB and RT Orbit Blocks™, with virtually all metal components now replaced with high-tech polymers and fibre equivalents. Integrated Functionality The clever 2-piece car body is moulded from a composite material that delivers low friction on the alloy track without the need for separate inserts.
Part No: RC72536
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Series 25 T-Track Traveller System Track
A new "racing" track has 25mm (63/64") stop hole spacing for even more precise control of the car position and sheeting angle. Low profile Lightweight 3/16" countersunk fasteners at 3-15/16" centers.
Part No: RC7251-3.0
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Stainless-Steel Genoa Slides
Die-formed stainless steel, tumbled and polished. Spring pin stop. Includes polyethylene liners .
Part No: 72-49
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
TRACK-T 1. 25 In. X10 BK|TRACK-T 1. 25 In.
Part No: 40-80
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-62
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-78
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-70
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-64
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
.
Part No: 40-68
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-64
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-76-C
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-62-C
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-72-C
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-66
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-74
|
|
|
