Top Sellers
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
|
Potable Water Holding Tank, 3 Gal. from TODD ENTERPRISES
1520) requirements. Standard Tanks feature a multiple port arrangement that enables use as a sanitation holding tank or for potable water storage. They include two 1 1/2" fill/drain ports and two 1/2" vent/supply ports. Designed for waste storage, each includes two 1 1/2" ports for inlet and drain and one 1/2" vent port. Both Standard and Heavy-Duty Tanks feature threaded NPT ports that are molded in to eliminate stress cracks and leaks. One year warranty.
|
Gas Caddy from TODD ENTERPRISES
Move 28 gallons of Gas in our smooth-rolling caddy Store and transport fuel safely on docks or onboard. Gas Caddy holds 28 gallons of fuel. Includes 10' of UL Approved hose with static wire, molded hose brackets, UL Approved spring loaded nozzle, 3/4" UL Approved ball valve, aluminum non sparking axle, pneumatic tires with nylon bearings, nylon wheel hubs, vented cap and a molded-in baffle for strength & durability. All Caddies bear the UN Marking, “UN3H1W. ” Color-coded red.
|
Fitting Relocation Kit for Todd Poly Tanks from TODD ENTERPRISES
This kit enables you to seal existing ports in your Todd water tank and install new ones wherever you need them for your installation.
|
Waste Caddy from TODD ENTERPRISES
Todd Waste Caddy A portable 29-gal. capacity waste removal system. Moves easily on pneumatic tires with plastic bearings. Features a vented cap and 10-foot, 1-1/2"dia. hose and gravity-assisted pump that forces out fluid by gravity for a more rapid transfer. Spring-loaded nozzle eliminates leaks . Bronze ball valve is located at the bottom of the tank . Constructed of cross-linked polyethylene for strength and durability .
|
Adjustable Height Standard Friction Lock Pedestal Seat, Ribbed Series from GARELICK
Seat raises or lowers, locks at desired height . 2-7/8" (7cm) diameter stanchion tube, 9" (23cm) diameter base plate . Anodized protective finish helps prevent saltwater corrosion and weathering. . 2-7/8" (7cm) diameter ribbed stanchion tube, 9.
|
|
|
Back-to-Back Lounge Chair Seat Cover, 22"H x 50"W x 22"D from TAYLOR
Breathable rip/stop polyester fabric plus air vents provide optimum protection and ventilation for your seats, especially in hot and humid climates. Polyurethane coating on the inside prevents color transfer or bleed-through . Comes with drawstring hem . Available for most popular seat styles .
|
Adjustable Packing Nut Wrench from SEAFIT
Better than a pipe wrench If you are not equipped with wrenches that fit the nuts on your stuffing box, we suggest you purchase TWO of these. Why? Because you will need two to make an adjustment: One for the locking nut and one for the adjusting nut. These wrenches tend to be easier to use than pipe wrenches—especially in tight engine spaces where many boaters must work. Primary Usage: Adjust/remove inboard shaft packing nut . Size: 1" to 3" adjustable .
|
Flush Lock - Black/Stainless Steel with Adjustable Offset Cam Bar from PERKO
Black plastic with stainless steel "D" ring handle and with adjustable offset cam bar. Two O-rings for increased water resistance. Position indicator shows open or closed position. Door thickness: 3/8" to 1-14" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 3/8" to 3" .
|
Adjustable Lock from TAYLOR
Three-part system provides easy snap-on/snap-off fender attachment and adjustment. A stainless base mounts to your boat, into which a peg snaps to hold the fender strap (sold separately). Fixed peg requires tying a knot to secure the fender at the desired height. Adjustable peg - adjust fender height by simply pulling on the strap. Max.
|
8-1/2" Hatch Holder, Adjustable, for Hatches to 10lb. from MOONLITE MARINE
Stainless, spring-type holders “pop” into place to hold hatches, doors, table leaves, etc. Easy to install. Adjustable model allows opening between 10° and 80°.
|
Single Deck Chair Cover, 24"H x 24"W x 22"D from TAYLOR
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
|
Pontoon Captain's Stand, 33"H x 26"W x 19"D from TAYLOR
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
|
Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
|
|
Handrail from TODD ENTERPRISES, Bench Seat - Adjustable from TODD ENTERPRISES
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,060
1,070
1,080
1,090
1,100
1,110
1,120
1,130
1,140
1,152
1,153
1,154
1,155
1,156
1,157
1,158
1,159
1,160
1,161
1,162
1,163
1,164
1,165
1,166
1,167
1,168
1,169
1,170
1,171
1,172
1,173
1,174
1,175
1,176
1,177
1,178
1,179
1,180
1,181
1,190
1,200
1,210
1,220
1,230
1,240
1,250
1,260
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Window Savers
Prevent rubbing and scratching of plastic windows. Attach to poles where poles touch plastic.
Part No: 11748
|
|
|
|
Home -> Seating & Covers -> Seating
Lower the pedestals with a quick, easy, secure adjustment and your leaning post becomes a bench seat! Ideal for center console fishing boats. Includes thick, tufted cushion, 4 rod holders, open ribbed storage compartment, and rear handrail for safety and stability. 37 1/2''W x 11''H x 15 3/4''D (with adjustable pedestals, 16''-32''H). Pedestals are 32'' on center.
Part No: 2200-35
|
|
|
|
Home -> Seating & Covers -> Seating
This Small 130 Fighting Chair combines elegance, brute strength and superior engineering. Contoured, multi-position ladder back and footrest are removable and adjust to fit any angler. 4"dia. stainless-steel flush-mount pedestal comes complete with non-corrosive Delrin bearing. Each chair includes two side gimbals and a multi-position, flipup gimbal. This small, compact version is ideal for smaller boats that still ply big-fish waters. Overall: 45. 5"H x 67"L 5161781.
Part No: INT9775TOUR
|
|
|
|
Home -> Seating & Covers -> Seating
Upholstered back rest adjusts to fit most leaning posts.
Part No: L10-1002-1
|
|
|
|
Home -> Seating & Covers -> Seating
Pedestal Seat Pack A variety of places to store your gear. A large central pocket to hold foul weather gear, extra clothes or safety gear. Smaller exterior pockets sized to hold three 9" x 14" tackle trays (not included), and mini-pockets are great for small personal items such as wallets and keys. Easily mounts over the top of most popular pedestal seats with heavy weight web straps and quick release nylon hardware.
Part No: 3135-4
|
|
|
|
Home -> Seating & Covers -> Seating
Extra-thick foam makes this chair a captain's favorite on runabouts and sport boats. Rot-proof molded polyethylene frame . Upholstery is plush white marine-grade vinyl over a deep foam core . Patented T-nuts are molded into the seat to accept most spider or slider combinations .
Part No: U851522W
|
|
|
|
Home -> Seating & Covers -> Seating
Tough, UV-stabilized polyethylene seat is molded for comfort and is complemented by removable, marine-grade vinyl cushions as part of the package. 15" fixed height, 2 7/8"dia.
Part No: 7800EB
|
|
|
|
Home -> Seating & Covers -> Seating
For mounting a fishing seat on a bench seat or aluminum boat seat. Adjusts from 8'' to 19''.
Part No: 819JBC
|
|
|
|
Home -> Seating & Covers -> Seating
Replacement cushions for the Ensign (Model 378341) are covered in high grade marine vinyl, adding comfort to one of our most popular seats.
Part No: 3500-EB
|
|
|
|
Home -> Seating & Covers -> Seating
At the center console or on the flying bridge, this is a comfortable and great looking chair. Made of rugged, UV-stabilized polyethylene for years of service, it features ladder back design with metal brackets that extend to the top of the chair back to provide maximum support and flexibility. Extra-thick tufted cushions and armrests. Anodized aluminum mounting brackets. 24 1/8"W x 20 3/4"H x 21 3/4"D.
Part No: 1500-01D
|
|
|
|
Home -> Seating & Covers -> Seating
Removable, marine-grade vinyl cushions for the First Mate Pedestal Seat (Model 486555).
Part No: 9992-98
|
|
|
|
Home -> Seating & Covers -> Seating
Custom contours, individual lumbar supports and thigh support, plus a padded headrest and swing-away arms, make this the king of seating comfort. Chair only. O. D. : 26 1/2"W x 31"H x 30"D. I. D. : 19 3/4”W x 25”H x 19 1/2”D. Hardware sold separately. Pedestal for 5 Star chair (sold separately). Base option for the 5 Star chair (sold separately).
Part No: U9705BE
|
|
|
|
Home -> Seating & Covers -> Seating
This 80 pound version of Pompanette's Tournament Fighting Chair line is designed for smaller vessels that have limited cockpit space. Lightweight, low maintenance chairs come standard with a durable textured finish, a solid fiberglass seatboard and a countered multi-position removable ladder backrest and footrest. Anodized aluminum hardware. 2-7/8" dia. For offshore fishing Non-porous resin frame Optional marine vinyl cushion set Seatboard measures: 20"W x 20"D, chair is 43.
Part No: INT8000TOUR
|
|
|
|
Home -> Seating & Covers -> Seating
All-stainless support provides quick and easy fold down and fold away locking seat support for jump seats or cockpit bench seats. Designed to install for either left or right folding action, its spring loaded button-lock mechanism locks in either the down or fold away position. 1"dia. stainless-steel leg with rubber tip . Easily cut to length for desired height. Stainless button lock and mounting bracket. 13"H x 1. 375"W x 2.
Part No: 99129:01
|
|
|
|
Home -> Seating & Covers -> Seating
The Todd Center Console is rotationally molded of rugged, heavy duty UV resistant polyethylene in one piece and features a built-in forward seat over a molded-in livewell. It has uniquely designed , dash, throttle, and steering panels. The entire interior of the console forms a large dry storage area. Steering wheel mounting requires the use of additional backing material such as exterior plywood, aluminum plate or a polyethylene panel for added panel strength and rigidity.
Part No: 1635
|
|
|
|
Home -> Seating & Covers -> Seating
Recommended for use with 50lb, offshore tackle when fighting fish, this high quality seat is constructed of rugged, UV-resistant polyethylene. with Mahogany backrest. Tufted bottom and arm cushions. Anodized aluminum pedestal and locking swivel/slider.
Part No: WE-1000
|
|
|
|
Home -> Seating & Covers -> Seating
Comfortable, durable, easy to maintain, and value priced—what more can you ask of a seat and pedestal package? An ideal way to upgrade or replace existing seats/pedestals and save! Sold as a complete package only. 15" high, 2-7/8" dia. anodized pedestal . Removable marine-grade vinyl covered foam cushions . UV-resistant roto-molded polyethylene shell . Anodized aluminum and stainless hardware .
Part No: 740002SK
|
|
|
|
Home -> Seating & Covers -> Seating
Contemporary and durable, this seat turns on a sturdy, torque-resistant swivel. A great choice for houseboats, pontoons and cruisers, with heavy-duty, molded, seamless, vinyl cushions that keep foam comfortable and dry. Padded arm rests. Rugged, 30"H polished-aluminum stool frame. Seat measures 24"H x 19"W x 17 1/2"D. Shipped via FedEx Only, No U. S.
Part No: 43130-01:02
|
|
|
|
Home -> Seating & Covers -> Seating
Perfect for cruisers, houseboats, or pontoons where steering is in the center of the boat. Molded, seamless, 3" thick vinyl cushions keep seat comfortable and dry. Clean easily with soap and water. Seat measures 15 1/2"W x 19"D. Chair is 24"W x 17 1/2"H x 19"D overall. Made in U. S. A. Mfr. 's one year limited warranty. Seat only, polished frame .
Part No: 48003-01:02
|
|
|
|
Home -> Seating & Covers -> Seating
The ultimate helm seat for your runabout, performance sport boat, pontoon or cruiser. This seat offers a high tech, stylish look with loads of comfort features. Frame is constructed with a rigid polyethylene roto-molded core. Upholstered with mildew, UV and stain resistant marine-grade vinyl. Dual track flip-up bolster allows piloting from a sitting, standing or leaning position. Application: Center console, helm . Upholstery Material: Marine grade vinyl . 5"W x 19"D x 18"H .
Part No: 48950-01:02
|
|
|
|
Home -> Seating & Covers -> Seating
A luxuriously comfortable perch, yet built solidly to take the strains of a tough fight. Thickly cushioned seat, arm rests and flex back for comfort while waiting for a strike. Built-in rod gimbal and swivel . Stainless steel quad base legs. Seat is 20'' across.
Part No: 4200-204
|
|
|
|
Home -> Seating & Covers -> Seating
They fit major center console and other boat types to provide comfort when standing for long periods at console or helm during a day on the water.
Part No: 10010
|
|
|
|
Home -> Seating & Covers -> Seating
This lightweight polyethylene console was designed specifically for inflatable boats, and installs easily to wood or aluminum floors. A large cutout makes installing steering and instrumentation easy, and provides storage area underneath. Wraparound grab rail for added safety.
Part No: 95-3005
|
|
|
|
Home -> Seating & Covers -> Seating
This popular, economical swingback seat serves double-duty as a livewell. It has thick, foamed-in insulation in the double walls of the 15. 5 gal. livewell, a recessed pocket for swingarm travel, rounded interior corners to protect bait and a Delrin® drain. Seat and back are marine-grade white vinyl-covered foam. Wide bottom flange for easy installation. Seat top is 19''H.
Part No: 1758-18U
|
|
|
|
Home -> Seating & Covers -> Seating
Multi-purpose seat for fishing, rigging or additional seating. Mounts port or starboard, and folds down for storage. Includes Shur-Loc catches for temporary or permanent mounting, and a chrome over brass gimbal. Adjustable height. Marine white vinyl over a thick foam cushion. Anodized aluminum frame.
Part No: 48099-01:02
|
|
|
|
Home -> Seating & Covers -> Seating
Deluxe slider adjusts 5" with positive locking action. Seat mount dimensions: 2 7/8"ID.
Part No: 835
|
|
|
|
Home -> Seating & Covers -> Seating
Heavy-duty cast aluminum with a locking adjustment knob. Nylon insert protects the pedestal post from scratches. Not for use with adjustable pedestals. 10 1/2''L x 13''W. Fits all 2 7/8'' dia.
Part No: 5205
|
|
|
|
Home -> Seating & Covers -> Seating
Clean, classic maintenance-free molded white poly console has large dry storage area and two recessed drink holders. 25''W x 32''H x 18''D.
Part No: 93-3003
|
|
|
|
Home -> Seating & Covers -> Seating
The Ensign is very popular for good reason—it‘s great looking, roomy and its curved arm rests make it very comfortable. The polyethylene seat is UV-stabilized to endure years of hot sun without cracking or crazing. For extra strength, or if mounting to a pedestal, we strongly recommend adding a mounting plate (Model 594325). Cushions covered in high grade marine vinyl.
Part No: 851538EB
|
|
|
|
Home -> Seating & Covers -> Seating
Compact seat offers added comfort and a fresh look and is ideal for center console boats. Ergonomic design, including front-of-seat waterfall taper, provides additional support and comfort, with or without cushions. Premium quilted white vinyl cushions feature high-density urethane foam padding, gray vinyl edge piping, and vinyl weave underside to minimize trapped moisture. Cushions snap on/off for easy cleaning.
Part No: 48423-21:02
|
|
|
