Sigmar 170 Bulkhead Heater, BTU Low: 6,000; BTU High: 17,000, 20-1/2"H x 9-1/2"W x 9-1/2"D from SIG MARINE
You can thumb your nose at Jack Frost with a diesel cabin heater. Offered in bulkhead or cabin sole mounting configurations, these heaters feature 304 stainless steel construction, large view windows, easy removal of burners for cleaning (bulkhead mount only) and can be easily adjusted for fuel viscosity. For installation, heaters require the 3" Deck Cap (Model 6867782), Thru-Deck Fitting (Model 6867790), and 3"Dia. Heat Source: Diesel #1, #2, kerosene . Material: Stainless steel .

One Step, 11-1/2"H x 18-1/2"W x 22-1/4"D from TAYLOR
Make climbing aboard easier! Durable, UV-resistant, white polyethylene steps have StepSafe non-slip pads for maximum slip protection. Wide 1-1/2" flange makes dock mounting easy. Washable surface cleans easily with soap and water. Handrail and mounting hardware sold separately.

Three Steps, 25-1/2"H x 25"W x 35-1/8"D from TAYLOR
Make climbing aboard easier! Durable, UV-resistant, white polyethylene steps have StepSafe non-slip pads for maximum slip protection. Wide 1-1/2" flange makes dock mounting easy. Washable surface cleans easily with soap and water. Handrail and mounting hardware sold separately.

Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.

Flex Trim - White 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.

Rigid Vinyl Rubrail - 1-1/2" H x 7/8" W from TACO PRODUCTS
Rigid vinyl rub rail tightly forms to the boats’ contours and has exceptional lasting qualities in the most adverse conditions. Color and gloss levels matched to gel coats blending rub rail with hull and deck . Requires heat for radius forming . Cuts and drills like wood . Flexible insert covers fasteners and provides a soft, cushioning effect against normal bumps from pilings and docks . Ideal for boats up to 25 feet . Drilled only on 6” centers . Color: WHC. Height: 1-1/2".

39.6gal. Flexible Water Tank, 27-1/2" x 55-1/16" from PLASTIMO
Flexible, light and form-fitting, these tanks use a PVC bladder inside a tough, abrasion-resistant nylon outer “envelope. ” Maintenance is easy because the inner bladder can be removed for cleaning and inspection. The bladder is slightly oversized so pressure is exerted on its nylon shell, rather than on the heat-welded seams. 1 1/2" 90° fill and 1/2" straight outlet fittings ready to install. Port Sizes: 1-1/2" 90° fill, 1/2" straight outlet . Vent: No .

6 3/4"dia. x 3 1/8"D 5 1/2" w/Cutout 5 3/4" 70 Watt Premium Round Coaxial Speakers from POLY-PLANAR
Waterproof and corrosion proof, the Premium Series speakers feature UV-stabilized plastic frames and plastic grilles. Their classic designs incorporate Poly-Planar's exclusive ultra-low magnetic field technology, so they won't interfere with your navigational equipment-it's no longer necessary to place speakers at least 5' from your compass! Equipped with polypropylene cone and mid-range Mylar tweeter. 4 ohm impedance. 70 Watts peak power each (35 RMS). 5-1/2" dia. Ship 5 lb Mfr.

26.4gal. Flexible Water Tank, 27-1/2" x 41-3/8" from PLASTIMO
Flexible, light and form-fitting, these tanks use a PVC bladder inside a tough, abrasion-resistant nylon outer “envelope. ” Maintenance is easy because the inner bladder can be removed for cleaning and inspection. The bladder is slightly oversized so pressure is exerted on its nylon shell, rather than on the heat-welded seams. 1 1/2" 90° fill and 1/2" straight outlet fittings ready to install. Port Sizes: 1-1/2" 90° fill, 1/2" straight outlet . Vent: No .

1-1/2" Threaded Marelon Mushroom Head, 3"L from FORESPAR
Marelon 251 Series Full Threaded/Mushroom Head Thru-Hull Connectors Forespar® series of the Thru-Hull Connectors are precision molded in high strength Marelon®. Their great strength, light weight and complete freedom from corrosion and electrolysis make them the ideal Thru-Hull Connectors for use above or below the waterline. All Thru-Hull Connectors must be installed with proper bedding compound. CF 2505 ½), indicates a Thru-Hull Connector that has been fitted with a strainer. Full threaded.

Upper Pintle, 1-1/2" Rudder Thickness, 3-3/8" Strap Length, 1" Strap Width, 1-3/4" Pin Length from SCHAEFER
Typical installations use one with a short pin and one with a long pin. Pin diameter: 1/2". All require #10 RHMS.

Vision Wheel with Finger Grips and Control Knob, 15-1/2" from WEST MARINE
15-1/2" cast stainless steel with finger grips, control knob and tapered shaft.

Lower Pintle, 1-1/2" Rudder Thickness, 7" Strap Length, 1" Strap Width, 2-3/4" Pin Length from SCHAEFER
Typical installations use one with a short pin and one with a long pin. Pin diameter: 1/2". All require #10 RHMS.

Salmon, Catfish, Striper Landing Net 26-1/2" x 30-1/2" from ED CUMMINGS
New! Salmon-Catfish-Striper Cradle Net Bow 26-1/2" x 301/2" . Handle 48" .

13.2gal. Flexible Water Tank, 27-1/2" x 27-1/2" from PLASTIMO
Flexible, light and form-fitting, these tanks use a PVC bladder inside a tough, abrasion-resistant nylon outer “envelope. ” Maintenance is easy because the inner bladder can be removed for cleaning and inspection. The bladder is slightly oversized so pressure is exerted on its nylon shell, rather than on the heat-welded seams. 1 1/2" 90° fill and 1/2" straight outlet fittings ready to install. Port Sizes: 1-1/2" 90° fill, 1/2" straight outlet . Vent: No .