Welcome! Please Sign-In
Top Sellers
1/4" Aluminum Hose Barb, 1/4" Make Thread from MOELLER
1/4" Aluminum Hose Barb, 1/4" Make Thread from MOELLER
Barb-Fuel 1/4Npt x 1/4 M Thrd|Barb-Fuel 1/4Npt x 1/4 M Thrd.
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.
Fuel Tank Connector, Yamaha 1/4 NPT Male Brass from MOELLER
Fuel Tank Connector, Yamaha 1/4 NPT Male Brass from MOELLER
Yamaha 1/4 NPT Brass Male Tank Connector.
Flex Trim - Black 1/2" opening from TACO PRODUCTS
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
1/4" - 5/16" Anchor connector from WEST MARINE
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
ABS In-Line Check Valve from BECKSON MARINE INC
Off/1/All/2 Battery Switch, 380 Continuous Amps, 850 Intermittent Amps from PERKO
Off/1/All/2 Battery Switch, 380 Continuous Amps, 850 Intermittent Amps from PERKO
For high-amperage applications like diesel engine starters, large inverters and windlasses. Reinforced polycarbonate body, 1/2"dia. brass terminal connections and an alternator field disconnect. Alt. Field Disc. : Yes . Switch Material: Reinforced Polycarbonate. Terminal Material/Size: Brass 1/2"dia. . Switch Dimensions: 5-1/4"sq. x 3-3/8"H .
1-7/8" Polished Brass Flush Ring Pull from ABI
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
PE-1 Lexan Mast Pad Eye from FORESPAR
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
Brass Reducer, 1/4"NPT x 1/8" FNPT from MOELLER
Brass Reducer, 1/4"NPT x 1/8" FNPT from MOELLER
Barb-Fuel 1/4Fnp x 1/8Mnpt Brs|Barb-Fuel 1/4Fnp x 1/8Mnpt Brs.
Aft-Deck Shower System from ATTWOOD
Aft-Deck Shower System from ATTWOOD
This compact hot/cold shower stores neatly in its own compartment on the stern or in the head. Includes a handheld shower spray head with shutoff, 6' hose, hot/cold water controls and a cover. Easily hooked into your freshwater system. Compartment is drilled for six #8 fasteners. Material: High-impact plastic . Dimensions: 9-1/2"H x 5"W x 2-1/4"D . Hose Size: 6'L . Port Sizes: 1/2" NPT .
Flipper Pump from WHALE PUMPS
Flipper Pump from WHALE PUMPS
Easy back-and-forth action produces one-way discharge. Spout swivels. Made of nylon, aluminum and synthetic rubber. For 1/2"ID hose. Material: Nylon, aluminum, rubber . Capacity: 2gpm . Dimensions: 7-1/8"H x 6"dia. . Cutout Size: 2". Clearance: 4-1/2" .

1, 1 1, 1-1, 4-1, 2" Shaft from C E SMITH, 8" Shaft from C E SMITH

3" Mini V-Bow Stop (ULT-435) from STOLTZ Home -> Trailer & Parts -> Trailer Parts & Carriers->Super-Roller Polyurethane Bow Guards
- Outside Dia - - Hole Dia - - Fits Bracket - - Vendor Part # - V-Bow Stop V-Bow Stop Mini Bow Stop Bow Stop Bow Stop Bow Roller Bow Roller --- --- 4-1/4" 5-1/4" 5-1/4" 3" 3-1/4" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 3" 4" 3" 3" 4" 3" 4" RP-3 RP-404 ULT-435 ULT-3 ULT-4 RP-335 RP-444.
Part No: ULT-435
5" Keel Roller - Spool (RP-5) from STOLTZ Home -> Trailer & Parts -> Trailer Parts & Carriers->Super-Roller Polyurethane Rollers
Resilient, shock-absorbent, non-marking Super Rollers are made from high-quality polyurethane to protect your investment. They spin freely to reduce drag while launching or retrieving your boat and remain uneffected by oil, gas or salt. Should last the lifetime of your trailer. Made in the U. S. A. Types Keel Rollers (Spool and Tapered). Self-Centering Roller. Wobble, Smooth. Side Guide.
Part No: RP-5
Universal Boardlocker from INNO Home -> Trailer & Parts -> Trailer Parts & Carriers->Surf Board Carriers
Boardlocker Killer waves 50 miles up the coast? No problem. Just secure your board on top of your car with these carriers and go! The Boardlocker fits virtually any rack and includes a floating strap system for easy loading. Rubber-coated stainless-steel cable strap. Universal Crane Board Carrier The Crane Board Carrier uses a floating strap system that keeps the buckles elevated for easy loading. Heavy-duty polyester straps. Use with a Board Pad if boards are not in a protective padded bag.
Part No: INA744
Universal Crane Board Carrier from INNO Home -> Trailer & Parts -> Trailer Parts & Carriers->Surf Board Carriers
Boardlocker Killer waves 50 miles up the coast? No problem. Just secure your board on top of your car with these carriers and go! The Boardlocker fits virtually any rack and includes a floating strap system for easy loading. Rubber-coated stainless-steel cable strap. Universal Crane Board Carrier The Crane Board Carrier uses a floating strap system that keeps the buckles elevated for easy loading. Heavy-duty polyester straps. Use with a Board Pad if boards are not in a protective padded bag.
Part No: INA745
Bell Roller End, 1 3/4"L x 3-1/2"D x 1/2" Shaft from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Thermo-Plasticized Rubber Rollers, Guards & Caps
They are resilient, non-marking, stronger than black rubber and softer than polyurethane.
Part No: 29742
Keel, Spool, 4"L for 1/2" Shaft from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Thermo-Plasticized Rubber Rollers, Guards & Caps
They are resilient, non-marking, stronger than black rubber and softer than polyurethane.
Part No: 29710
Ribbed Roller w/polypropylene hub, 3"L x 5"OD for 1-1/8" Shaft from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Thermo-Plasticized Rubber Rollers, Guards & Caps
They are resilient, non-marking, stronger than black rubber and softer than polyurethane.
Part No: 29730
Bow Guard Roller, 4"L x 3-1/2"OD for 1/2" Shaft from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Thermo-Plasticized Rubber Rollers, Guards & Caps
They are resilient, non-marking, stronger than black rubber and softer than polyurethane.
Part No: 29721
Deep V Bow Guard Roller, 12"L for 5/8" Shaft from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Thermo-Plasticized Rubber Rollers, Guards & Caps
They are resilient, non-marking, stronger than black rubber and softer than polyurethane.
Part No: 29705
Bell Roller End, 1 1/4"L x 3"D x 1/2" Shaft from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Thermo-Plasticized Rubber Rollers, Guards & Caps
They are resilient, non-marking, stronger than black rubber and softer than polyurethane.
Part No: 29740
Deep V Bow Guard Roller, 10"L for 5/8" Shaft from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Thermo-Plasticized Rubber Rollers, Guards & Caps
They are resilient, non-marking, stronger than black rubber and softer than polyurethane.
Part No: 29704
Deep V Bow Guard Roller, 8"L for 5/8" Shaft from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Thermo-Plasticized Rubber Rollers, Guards & Caps
They are resilient, non-marking, stronger than black rubber and softer than polyurethane.
Part No: 29703
Keel, Spool, 5"L for 5/8" Shaft from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Thermo-Plasticized Rubber Rollers, Guards & Caps
They are resilient, non-marking, stronger than black rubber and softer than polyurethane.
Part No: 29712
Bow Guard Roller, 3"L x 3"OD for 1/2" Shaft from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Thermo-Plasticized Rubber Rollers, Guards & Caps
They are resilient, non-marking, stronger than black rubber and softer than polyurethane.
Part No: 29720
Trailer Glyde Sliks - 16' boat from TACO PRODUCTS Home -> Trailer & Parts -> Trailer Parts & Carriers->Trailer Glyde Slicks
.
Part No: P05-08W
Trailer Glyde Sliks - 12' boat from TACO PRODUCTS Home -> Trailer & Parts -> Trailer Parts & Carriers->Trailer Glyde Slicks
Why put unnecessary wear on your trailer, the bearings and your back? Simply add the Sliks to both bunks where your boat rests and launch with ease. Special anti-friction additives help your boat glide into the water without damage or marring. Easy and quick installation . Sold in kits with varying numbers of 24" strips according to boat length. . Available for 12', 16' and 20' boats.
Part No: P05-06W
4 Stud Hub, 4" Dia, 1" Spindle, 12" Wheel, 1250lb Cap from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Trailer Hub Kits
These hubs come fully assembled with pregreased bearings, which cuts down on the mess and makes final installation on to the axle much easier.
Part No: 13110
5 Stud Hub, 4-1/2" Dia, 1-1/4" to 1-1/6" Spindle, 14" Wheel, 1350lb Cap from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Trailer Hub Kits
These hubs come fully assembled with pregreased bearings, which cuts down on the mess and makes final installation on to the axle much easier.
Part No: 13311
5 Stud Hub, 4-1/2" Dia, 1" Spindle, 12" Wheel, 1250lb Cap from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Trailer Hub Kits
These hubs come fully assembled with pregreased bearings, which cuts down on the mess and makes final installation on to the axle much easier.
Part No: 13210
5 Stud Hub, 4-1/2" Dia, 1-3/8" to 1-1/6" Spindle, 15" Wheel, 1750lb Cap from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Trailer Hub Kits
These hubs come fully assembled with pregreased bearings, which cuts down on the mess and makes final installation on to the axle much easier.
Part No: 13511
4 Hole Hub, 4" Dia, 1" Spindle, 12" Wheel, 1250lb Cap from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Trailer Hub Kits
These hubs come fully assembled with pregreased bearings, which cuts down on the mess and makes final installation on to the axle much easier.
Part No: 13100
20.5 x 8 x 10C Bias, 6 Ply, 5 Bolt, Galvinized Finish from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Trailer Tires & Wheels
Boat and camper tires take a real pounding on the road and long periods of storage can cause deterioration. These affordable replacement tires meet Department of Transportation Standards. Tires beginning with ST are special trailer tires with stiffer sidewalls to improve trailer stability and reduce sway. Select bias ply with galvanized, painted or chrome rims, spoked or solid, in a variety of sizes. For heavier loads and/or trailers used over long distances, we recommend radial tires.
Part No: 16526
570 x 8B Bias, 4 Ply, 5 Bolt, Painted Finish from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Trailer Tires & Wheels
Boat and camper tires take a real pounding on the road and long periods of storage can cause deterioration. These affordable replacement tires meet Department of Transportation Standards. Tires beginning with ST are special trailer tires with stiffer sidewalls to improve trailer stability and reduce sway. Select bias ply with galvanized, painted or chrome rims, spoked or solid, in a variety of sizes. For heavier loads and/or trailers used over long distances, we recommend radial tires.
Part No: 16575
570 x 8B Bias, 4-Ply, 5-Bolt, Galvanized Finish from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Trailer Tires & Wheels
Boat and camper tires take a real pounding on the road and long periods of storage can cause deterioration. These affordable replacement tires meet Department of Transportation Standards. Tires beginning with ST are special trailer tires with stiffer sidewalls to improve trailer stability and reduce sway. Select bias ply with galvanized, painted or chrome rims, spoked or solid, in a variety of sizes. For heavier loads and/or trailers used over long distances, we recommend radial tires.
Part No: 16525
480 x 8B Bias 4 Ply, 5-Bolt, Painted Finish from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Trailer Tires & Wheels
Boat and camper tires take a real pounding on the road and long periods of storage can cause deterioration. These affordable replacement tires meet Department of Transportation Standards. Tires beginning with ST are special trailer tires with stiffer sidewalls to improve trailer stability and reduce sway. Select bias ply with galvanized, painted or chrome rims, spoked or solid, in a variety of sizes. For heavier loads and/or trailers used over long distances, we recommend radial tires.
Part No: 16570
480 x 8B Bias 4 Ply, 4-Bolt, Galvanized Finish from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Trailer Tires & Wheels
Boat and camper tires take a real pounding on the road and long periods of storage can cause deterioration. These affordable replacement tires meet Department of Transportation Standards. Tires beginning with ST are special trailer tires with stiffer sidewalls to improve trailer stability and reduce sway. Select bias ply with galvanized, painted or chrome rims, spoked or solid, in a variety of sizes. For heavier loads and/or trailers used over long distances, we recommend radial tires.
Part No: 16500
480 x 8B Bias 4 Ply, 4-Bolt, Painted Finish from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Trailer Tires & Wheels
Boat and camper tires take a real pounding on the road and long periods of storage can cause deterioration. These affordable replacement tires meet Department of Transportation Standards. Tires beginning with ST are special trailer tires with stiffer sidewalls to improve trailer stability and reduce sway. Select bias ply with galvanized, painted or chrome rims, spoked or solid, in a variety of sizes. For heavier loads and/or trailers used over long distances, we recommend radial tires.
Part No: 16550
20.5X8X10C ST Bias, 6-Ply, 5 Bolts, Painted Finish from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Trailer Tires & Wheels
Boat and camper tires take a real pounding on the road and long periods of storage can cause deterioration. These affordable replacement tires meet Department of Transportation Standards. Tires beginning with ST are special trailer tires with stiffer sidewalls to improve trailer stability and reduce sway. Select bias ply with galvanized, painted or chrome rims, spoked or solid, in a variety of sizes. For heavier loads and/or trailers used over long distances, we recommend radial tires.
Part No: 16578
570 x 8B Bias, 4 Ply, 4 Bolt, Painted Finish from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Trailer Tires & Wheels
Boat and camper tires take a real pounding on the road and long periods of storage can cause deterioration. These affordable replacement tires meet Department of Transportation Standards. Tires beginning with ST are special trailer tires with stiffer sidewalls to improve trailer stability and reduce sway. Select bias ply with galvanized, painted or chrome rims, spoked or solid, in a variety of sizes. For heavier loads and/or trailers used over long distances, we recommend radial tires.
Part No: 16555
Wheel Bearing Set - 1" Spindle OD, 1.980 Hub ID from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Trailer Wheel Bearing Sets
Replace worn bearings for smoother operation of your trailer wheels. Each set outfits one wheel. Includes outer and inner bearing set, two races, grease seal and cotter pin.
Part No: 27111
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11