Top Sellers
Marine Silicone Sealant, Clear, 10oz. Tube from WEST MARINE
Use wherever a flexible, removable seal is required A specially-formulated marine silicone that won’t sag, shrink or turn yellow. Can be used above and below the waterline wherever a flexible, removable seal is required. Excellent for bedding deck fittings and hardware that you may want to remove at some time. Also good for insulating between dissimilar metals to prevent galvanic corrosion. Formulation: One-part silicone sealant . Bonds to non-oily woods, metal, fiberglass, glass, plastics .
|
G. O'Day 222/Santana 525,Length 47", Height at tip 2 1/4", Width at butt 1 1/2", Width at tip 2" from WEST MARINE
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Cant find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
|
Marine Whistle from WEST MARINE
Keep this powerful, rugged and reliable whistle attached to your PFD. Made for the marine environment, from noncorroding, high-impact plastic. No metal parts.
|
Life Jacket Organizer Bag from WEST MARINE
Keep extra lifejackets contained & easy to find Keep your life jackets readily accessible and protect them from damage while not in use with our bright, sturdy storage bag. We use hook-and-loop closures because zippers in a marine environment tend to freeze-up when least convenient. The fabric is heavy-duty fiber-reinforced vinyl, plainly marked for instant identification in an emergency. Accommodates 4–6 adult life jackets (depending on style).
|
Lube Tube Adapter for Yamaha, Nissan, Tohatsu, Honda (2-50hp) from WEST MARINE
Marine lower unit drain, flush and fill tool. Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefishier lower units. Quick, easy and clean way to change marine lower unit gear lube. For use with all 8- and 10-oz.
|
Chrome Push-Button Door Catch from WEST MARINE
Set includes left and right catches and surface-mount striker plates.
|
Stainless Strap Hinge, 2 5/8 inch from WEST MARINE
Type 304 electro-polished. Gauge: 0. 060 stainless steel. Drilled and countersunk for #8 fasteners (not included). Sold in pairs. ShWt .
|
Portable Gunwale-Mount Boarding Ladder, 3 Steps, 11" Gunwale Width from WEST MARINE
These portable ladders hook right over your boat’s gunwale with a hull hugging design and ladder standoffs for added safety. Thick non-skid steps feature an Ultra Traction tread that’s kind to your feet. Keep one accessible on board your boat for swimming, skiing and emergencies. 225lb. Mounting Style: Hook over gunwale . Material: Heavy-duty 1" aluminum tubing, vinyl hooks and step treads . Dimensions: 3-step: 36"L x 15"W; 4-step: 48"L x 15"W .
|
Cabinet Handle, Stainless Steel Bar 13" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
|
Marine Structural Filler - Quart from WEST MARINE
Great for fiberglass and sheet metal ding repairsFiberglass filler with long strand reinforcing fibers for fiberglass and sheet metal repairs. Water-resistant. Hardener included. Great for quick and easy ding repair on fibergalss surfboards, sailboards, canoes and runabouts. Formulation: Polyester putty . Recommended Usage: Fiberglass and sheet metal repairs . Color: White.
|
|
|
Engine Winterizing Kit from WEST MARINE
Winterize your outboard or sterndrive with this convenient kitUses your existing flusher and a garden hose to winterize your outboard or sterndrive engine, even while it’s on the trailer. Kit includes a five-gallon jug, hose fittings and instructions for winterizing. You supply five gallons of nontoxic antifreeze for each engine. Complete instructions are included.
|
Sail Ties, Blue 5FT from WEST MARINE
Sail ties with a clever twistOur premium-quality tubular nylon webbing ties have a clever twist: a sewn loop at one end, with a twist that keeps the eye open so it’s easy to thread even with cold hands. Tie a simple slip knot and you’re done! Color-coded so you can quickly select the size you need.
|
Adaptor Fitting for Suzuki & Honda Lower Units from WEST MARINE
Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefisher lower units Fits standard quart plastic bottles. Flexible hose gets to hard-to-reach fill plugs.
|
Port Runner Folding Bike from WEST MARINE
Reliable portside transport that's super easy to stow! Our exclusive 20" bike is ideal for reliable portside transport. The distance between the dock and the grocery store is not always shortor flatand that's why this bike has a chrome-plated steel derailleur and six big sprockets for climbing inclined streets. Stows small for space economy and features a convenient luggage rack to make errands easier. 28lbs. Gears: Six . Drive Train Components: Shimano RD-TX30 .
|
|
Fastener| from WEST MARINE, Right| from WEST MARINE
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Catches & Latches->Stainless Steel Magnetic Clasps
Stainless Steel Magnetic Clasps for 3/4" thick surfaces.
Part No: F16-0011-1
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Handles & Pulls
Chrome-plated zinc with black plastic finishing flange. Spring-loaded ring pull. Unit can be mounted horizontally or vertically. Dimensions: 3/4" x 3 1/4''.
Part No: 1221DP0CHR
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Handles & Pulls->Chrome-Plated Flush Lifting Handles
Heavy-duty flush handles of chrome-plated pressure cast bronze or zinc with a stainless steel pin.
Part No: 0776DP1CHR
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Handles & Pulls->Chrome-Plated Flush Lifting Handles
Heavy-duty flush handles of chrome-plated pressure cast bronze or zinc with a stainless steel pin.
Part No: 0776DP2CHR
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Handles & Pulls->Stainless Steel Bar Handles
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
Part No: F16-5524-1W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Hinges
Chrome-plated brass 1 5/8” x 3 1/4”. Requires #8 FH screws (sold separately).
Part No: F61-3140CH-1W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Hinges->Stainless Butt Hinges
Stainless Butt Hinge,1 1/2x2 inch inch|HINGE-BUTT 1-1/2X2SS.
Part No: H20-0112-1W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Hinges->Stainless Continuous Hinges - "Piano Hinge"
Continuous, or “piano” stainless steel hinges function as a movable fastener to hinge lids, doors, large cabinets and hatches. A popular choice for building and refitting! They provide uniform strength and smooth pivot action throughout the entire length. 72" lengths with countersunk holes on 2" centers.
Part No: H14-0114A72-1W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Hinges->Stainless Continuous Hinges - "Piano Hinge"
Continuous, or “piano” stainless steel hinges function as a movable fastener to hinge lids, doors, large cabinets and hatches. A popular choice for building and refitting! They provide uniform strength and smooth pivot action throughout the entire length. 72" lengths with countersunk holes on 2" centers.
Part No: H14-0112A72-1W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Hinges->Stainless Continuous Hinges - "Piano Hinge"
Continuous, or “piano” stainless steel hinges function as a movable fastener to hinge lids, doors, large cabinets and hatches. A popular choice for building and refitting! They provide uniform strength and smooth pivot action throughout the entire length. 72" lengths with countersunk holes on 2" centers.
Part No: H14-0116A72-1W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Hinges->Stainless Door Hinges
Stainless Butt Hinge,3x 1 1/2|HINGE-DOOR 1-1/2X3.
Part No: H30-1060-1W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Hinges->Stainless Door Hinges
Stainless Butt Hinge,3x 1 1/2|HINGE-DOOR 1-1/2X3.
Part No: H30-1050-1W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Hinges->Stainless Utility Hinges
Stainless Utility Hinges Marine-grade stainless steel . Gauge: . 060 stainless steel. Pin length: 1 1/2". Drilled and countersunk for #8 fasteners.
Part No: H21-0232-1W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Hinges->Take-Apart Motor Box Hinges
Type 316 cast stainless steel. Open width: 3 1/2”. Pin length: 1 1/2”. Drilled and countersunk for #10 fasteners (sold separately).
Part No: H30-1090R-1W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Locks
High-security lock offers superior corrosion resistance for the marine environment.
Part No: 89511
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Locks
Tough steel cable has a vinyl covering that protects against the elements.
Part No: 66
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Locks
No tools are required to change the combination on this lock. This three dial resettable lock has a heavy chrome plating for great weather resistance. Double-bolted hardened steel shackle. Body width: 1 1/2"W.
Part No: 12611
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Locks->2" Solid Brass Combination Padlock
Set your own combination for easy recall. . Corrosion-resistant solid brass case. . Hardened steel shackle. Shackle: dia. 5/16".
Part No: 175BSDSPT
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Brass Padlocks
Long-lasting security in the harsh marine environment. Each lock comes with two keys. Type: Keyed - 3 packs are keyed alike . Material: All brass .
Part No: 56811
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Locks->Nautilus Combination Lock
Set your own easy-to-remember combination on these padlocks with four-pin tumblers. You set the combination using the key provided. All brass internal components and a stainless steel shackle for superior corrosion protection. Type: Combination . Combination Type: Reset-able four tumbler . Material: Brass body and internal components, solid stainless shackle .
Part No: 15813
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->2" Solid Brass Combination Padlock
Set your own combination for easy recall. . Corrosion-resistant solid brass case. . Hardened steel shackle. Shackle: dia. 5/16".
Part No: 175D
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->316 Stainless Steel Barrel Bolt
Requires seven - 5/32" fasteners (not included) 1-1/2"W MFRs lifetime limited warranty .
Part No: C3855-0001
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Barrel Bolt
Fasteners sold separately. ShWt .
Part No: F61-0412CH-1W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Barrel Bolt
Fasteners sold separately. ShWt .
Part No: F61-0412BR-1W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Barrel Bolt
Fasteners sold separately. ShWt .
Part No: F61-0312BR-1W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Barrel Bolt
Fasteners sold separately. ShWt .
Part No: F61-0312CH-1W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Barrel Bolt
Fasteners sold separately. ShWt .
Part No: F61-0414BR-1W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Barrel Bolt
Fasteners sold separately. ShWt .
Part No: F61-0414CH-1W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Brass Elbow Catches
Brass elbow catches with non-rusting springs. Base: 5/8” x 1”.
Part No: F63-1000BR-1W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Brass Elbow Catches
Brass elbow catches with non-rusting springs. Base: 5/8” x 1”.
Part No: F63-1000CH-1W
|
|
|