Top Sellers
T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
T-Top Boat Cover, Center-Line Length 19'5" to 20'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
Medium Edging, White, 25' Coil, 3-1/2"H x 1-1/2"W from TAYLOR
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
|
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
|
Gunnel Guard - 1/2" Round, 1-1/2" Diameter, 20' Length from TAYLOR
These polyester-covered guards will protect your boat from dings and scratches and they won’t rot in the sun or saltwater like cotton guards. Great for use on dinghies and swim platforms, too. Fabric tabs attach easily with screws or nails. Half Round is for flat surfaces; 3/4 Round is for 90° edges. Sold in 10' or 20' lengths or by the foot up to 50'. Material: Polyester fabric/closed-cell foam . Attachment Method: Screws or nails . Shock Absorption Mechanism: Foam padding .
|
Ultra Blue Three-Strand Line, 1/4" Dia., 1,700lb. Breaking Strength from SAMSON ROPE
Ultra-strong line outlasts polypro two to one Made from bi-polymer olefin fiber, ultra-strong Ultra Blue is 30%–35% stronger than polypropylene and has more than twice the wear life. UV light resistance is excellent, it is easy to grip and it floats.
|
|
|
|
|
Rejuvenate 2-Cycle Engine Oil, Pint from MERCURY MARINE
Rejuvenate is unlike anything on the market today. It rolls back the clock on engines by quickly removing performance robbing carbon deposits while stabilizing fuel. Powerful detergents remove carbon deposits on piston skirt, crowns and under crowns, power valves, cylinder intake, exhaust and heads. For air-cooled or water-cooled 2-cycle engines with premixed fuel or oil injection systems.
|
3/16" AmSteel-Blue Rope, Red from SAMSON ROPE
AmSteel-Blue is a 12-strand braided rope utilizing Parallay design with our proprietary blue Samthane coating with Dyneema® SK-75 fiber. This rope yields the maximum in strength-to-weight ratio and is stronger than wire rope constructions—yet it floats. Superior flex, fatigue and wear resistance. Stronger than AmSteel. Much stronger than steel. Very low stretch. Easily spliced. Superior flex.
|
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
Large Mast Sheet Bag, 8.4" x 28" x 6" from BLUE PERFORMANCE
Keep the mast area tidy with this handy sheet and gear bag. Large 2" webbing hook-and-loop straps secure bag to the mast and out of the way.
|
Stainless-Steel Fender Lock from TAYLOR
The "one-way" locking peg provides secure and reliable mounting and allows the use of up to 1/2" diameter line.
|
Hatch Riser Arm for 20" x 20" Hatch from TAYLOR
Replacement arms for Taylor hatches from 1987 to the present. Universal arms can be left or right.
|
18" Dia. Corner Mount Inflatable Dock Wheel, 6.5" High, for Boats up to 30' to 45' from TAYLOR
Smooth rolling wheels fend your vessel away from the dock. Molded-in standard-needle inflation valves let you adjust firmness. Hot dip galvanized hardware. Strong, 2"dia. axle housing on the 12" and 18" model, and 3/4" dia. axle housing on the 9" model. Material: Vinyl. Attachment Method: Galvanized hardware. Shock Absoption Mechanism: Inflated vinyl bumper.
|
|
Blue from TAYLOR, 2 from MAPTECH, 000 from NIMA, from FINE EDGE
|
|
Not sure what to get for your favorite boater? Give the West Marine Gift Card! Use our Gift Card at more than 370 West Marine stores, online, or through our catalog at 1-800-BOATING for merchandise purchases and backorder or special order deposits. . SHIPPING NOTICE: Gift Cards shipping ground delivery will ship 1st Class Mail to any US address FREE. For an additional fee, Gift Cards may be shipped via US Priority Mail, Two-Day or Overnight service. The Gift Cards cannot be redeemed for cash.
Part No: GC-0100
|
|
|
|
Bearing Carrier Drive Shaft Replaces: 909121.
Part No: 18-2183
|
|
|
|
Defense Mapping Agency charts (now known as National Imagery and Mapping Agency or NIMA charts) are U. S. government charts of waters other than the territories and possessions of the U. S. (see NOAA charts for coverage of U. S. territories).
Part No: 52180
|
|
|
|
Powerful 15:1 purchaseThe Dinghy Vang is pre-reeved with low-stretch polyester line, and is constructed with a 3:1 cascade inside a 5:1 purchase for a powerful 15:1 system. 16mm blocks handle high loads. It pivots for a fair lead so it is simple to cleat and release, and angles up and down to accommodate mounting height. Maximum mast to boom distance of 30" (760mm) and a simple line adjustment shortens the system. Clevis pin attaches cunningham to vang system. Safe Working Load 450lb.
Part No: 447
|
|
|
|
Stainless-steel guard protects your wheel and pedestal while providing a secure handhold. Includes new stainless guard feet, stainless gasketed top plate and mounting hardware. 1-1/8" dia.
Part No: 1600-45-58S
|
|
|
|
3-Year DOP From 500 To 599. 99|3-Year DOP From 500 To 599.
Part No: 2YR DOP 500-599
|
|
|
|
|
2-Year DOP Fr 1250 To 1499. 99|2-Year DOP Fr 1250 To 1499.
Part No: 1 DOP 1250-1499
|
|
|
|
|
2-Year DOP Fr 7000 To 7999. 99|2-Year DOP Fr 7000 To 7999.
Part No: 1 DOP 7000-7999
|
|
|
|
|
2-Year DOP Fr 9000 To 9999. 99|2-Year DOP Fr 9000 To 9999.
Part No: 1 DOP 9000-9999
|
|
|
|
Switching and circuit protection in a single device. Self-trimming case eliminates the need for mounting panels or trim bezels and permits easy installation with a standard sized hole saw. Large clearance around 5/16" terminal studs accept heavy gauge wire lugs and allows high-torque connections. Ignition-protected—safe for installation aboard gasoline-powered boats. Interrupt rating: 5000A at 12V DC. Switch Type: Toggle. Safety Features: "Trip Free" design.
Part No: 7042
|
|
|
|
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
Part No: 74201OB
|
|
|
|
A new generation inverter designed to accommodate entertainment systems and small appliances in smaller RVs, boats and cabins in an all new design. The modern, hourglass case, paired with the die-cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation. The MM Inverter/Charger is fan cooled, enabling the unit to work well in confined spaces. Output Waveform: Modified Sine Wave . , low battery cutout) .
Part No: MM1212-U
|
|
|
|
|
**T Ball #6, 1/4 In. Cable|**T Ball #6, 1/4 In.
Part No: TB01406
|
|
|
|
|
|**Spreader Tubes, 5/16 In.
Part No: SP51604
|
|
|
|
Chart your travels. real compass and journal in one. Makes a great gift for children of all ages! L. 5. 12 in. / 13 cm. . W. 8. 07 in. / 20.
Part No: MS010
|
|
|
|
Keep your outboard looking good and protect it against the tough marine environment. Our motor hoods have been redesigned to better fit newer cowl sizes and later model engines.
Part No: 926113
|
|
|
|
Designed to lay over your boat’s gunnel, and with your choice of design, salutation or admonition, these mats are a great way to protect your gelcoat and greet your guests. Mats feature non-skid backings, are made of heavy marine canvas and weighted at each end to assure that they stay put in a breeze.
Part No: BM-20 NAVY
|
|
|
|
Custom designed by the best net man in the business. Designed to fully open . 3/8˝ nylon hand line . Additional premium braille lines . Double selvage mesh at leadline . Additional weight added to sink faster . Tied with extra strong bonded thread at leadline.
Part No: 19-10
|
|
|
|
Super Pro™ Series Designed to fully open . 3/8˝ nylon hand line . Additional premium braille lines . Double selvage mesh at leadline . Additional weight added to sink faster . Tied with extra strong bonded thread at leadline.
Part No: 24-10
|
|
|
|
These durable lightweight covers are ideal for protection on the mooring or in storage (not meant for trailering). Features a 70-Denier lightweight polyester fabric that’s the perfect blend of economy and simplicity.
Part No: 70283
|
|
|
|
The newest universal-fit boat covers from Taylor feature heavy-duty polyester fabric in two-tone colors for a unique look while fully capable of surviving the rigors of the road. Each cover includes a storage bag, tie-down straps and a support pole for a complete boat cover care system. 6. 5oz. polyester fabric with excellent mildew- and water-resistance.
Part No: 70911
|
|
|
|
Completely Updated! Cape May and Delaware Bay through the Chesapeake and Intracoastal Waterway to Fernandina Beach, FL. Packed with marinas, local navigation advice, aerial photos, and ICW Bridge Table. 560 pages. .
Part No: BKCBF-02
|
|
|
|
Silver or gold tubes are anodized for long life in the marine environment. Fabricated from cold drawn aluminum with no unsightly weld seams. Available in aluminum schedule pipe sizes 3/4" thru 1 1/4" in horizontal and vertical models. If using stainless steel tube, please go down 1/4" in size. Type:Clamp on. # of Rods:One. Material:Aluminum. Lining:White vinyl. Diameter:Rod holder is 1 5/8" ID. Mount:Clamp on.
Part No: 88162-1
|
|
|
|
Shakespeare's Style 4720 Economy Rail Mount is designed for quick and easy installation on vertical or horizontal, straight or angled rails. Its simple design makes installation a snap. The vice section grips the rail, and the flat section supports the antenna. The flat section can also be bolted to a flat surface, instead of to the rail grip. Standard 1" - 14 thread. Nylon adapters included for 7/8", 1", and 1¼" vertical or horizontal rails.
Part No: 4720
|
|
|
|
West Marine stocks hard-to-find replacement parts and cooler accessories. Parts Kit includes 4 hinges and 2 latch sets.
Part No: 8502
|
|
|
|
North & South America West Coast Cruising Guides & Chartbooks. Cruising Guides.
Part No: 0071374647
|
|
|
|
Outstanding solvent penetration resistance for all marine paints. . Bonded fiber formation reduces contamination of paint or varnish. . Use with Hand Masker M3000 Dispenser. .
Part No: 06738
|
|
|
|
.
Part No: 46185
|
|
|
|
High-density polyethylene racks, guaranteed for life. For vertical or overhead mounting. Mounting feet and stainless steel screws are included. Sold in pairs. 2-Rod Rack: 8-1/2"L x 2-7/8"H x 3/4"D. 4-Rod Rack: 15-1/2"L x 2-7/8"H x 3/4"D.
Part No: 65610
|
|
|
|
Patterned to fit V-Hull boats with extended forward deck areas and reduced cockpit space. These covers will fit boats with low- to medium-profile bow rails and high windshields. Outboard models are made to cover a single outboard. 4-ply fold-over seams . 1", heavy-duty, UV-resistant tiedowns . 1,000s of styles & sizes to fit nearly any boat . Designs that fit outboard and inboard motors . Tough enough to handle over-the-road trailering . Poly Cotton Fabric: Trailerable .
Part No: 72721
|
|
|
