Top Sellers
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
|
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Hatch Riser Arm for 20" x 20" Hatch from TAYLOR
Replacement arms for Taylor hatches from 1987 to the present. Universal arms can be left or right.
|
T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
T-Top Boat Cover, Center-Line Length 19'5" to 20'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
84”L Fiberglass Bow from TAYLOR
Bows moounted in bow sockets are the sure and easy way to keep a boat cover taut and free from water-collecting pockets. Sockets can be mounted on any rail system or anywhere on deck wall. Rubber gasket provides snug fit for fiberglass bows. Super strong and flexible, will not take a “set”. Cut to desired length. Incude rubber end covers to grab socket.
|
Replacement Gas Strut, 12" Compressed x 20" Extended Length, 40lb. Rating from TAYLOR
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
|
Replacement Gas Strut, 9.5" Compressed x 15" Extended Length, 30lb. Rating from TAYLOR
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
|
Adjustable Lock from TAYLOR
Three-part system provides easy snap-on/snap-off fender attachment and adjustment. A stainless base mounts to your boat, into which a peg snaps to hold the fender strap (sold separately). Fixed peg requires tying a knot to secure the fender at the desired height. Adjustable peg - adjust fender height by simply pulling on the strap. Max.
|
Welcome Aboard Mat, Navy, 18" X 30" from TAYLOR
High-quality, marine-grade mats will add spice to any deck or door. Made from plush carpet that is waterproof, stain- and fade-resistant. Mats are mold- and mildew-resistant and feature a nonskid rubber backing.
|
Stainless-Steel Fender Lock from TAYLOR
The "one-way" locking peg provides secure and reliable mounting and allows the use of up to 1/2" diameter line.
|
Sully Stick Winter Mooring Buoy from TAYLOR
Extend the life of your mooring with our ice-proof stickUse this long tapered buoy in place of a standard round buoy during winter months to help prevent ice entrapment and extend the life of the mooring by protecting it from the damaging effects of freezing temperatures. Molded in eyelet at the top allows for easy retrieval and the base eyelet is reinforced with galvanized metal brushing to attach a rope and connect to the anchor chain. 80"L x 6" Dia.
|
|
102"Beam from TAYLOR, 92"Beam from TAYLOR, Carb from SIERRA
|
|
Print on Demand Nautical Charts Accurate and up-to-date, charts include latest notice to mariners corrections, NIMA and NOAA's safety updatesCharts are printed after your order is placed, ensuring that you receive the most up-to-date informationApproved by NOAA, meets USCG carriage requirements, SOLAS compliant and a replacement for traditional NOAA paper chartsDistinctive graphics and vibrant colors provide easy readability under varying light conditions.
Part No: 16063 POD
|
|
|
|
Learn The Tackle, Baits & Tactics To Catch Stripers! It is no secret that flyfishing for Stripers has been a popular and productive method for anglers fishing the Northeast Coast. Now, fishermen in reservoirs throughout the country are discovering that landlocked stripers can easily be taken using many of the same baits and techniques utilized by saltwater anglers.
Part No: F8836DVD
|
|
|
|
Sierra's leadership in the marine industry continues with the addition of 20 new belts and 8 new hoses for late model stem drive and inboard application. An industry first, Sierra is excited to announce its new line-up of Serpentine belts. 14 Serpentine belts for late model coverage on Mercruiser V6 and V8 big/small block applications. Belts are polyester corded for long-life and durability. Hoses are molded for exact fit and precise installation.
Part No: 18-15119
|
|
|
|
Tough nylon O Matter® frames shape up your view with a unique look and lightweight, premium comfort. Oakley’s rugged polarized lenses with patented optics for smudge, glare and haze resistance keeps visual performance at full tilt.
Part No: TORTOISE/BROWN-ONE SIZE FITS ALL
|
|
|
|
Completely portable bait tanks feature a patented Oxygen Infusor aeration system that creates millions of micro bubbles to efficiently oxygenate water. Dark blue interiors reduce shadows on the tank wall, keeping fish calm and stress-free. Generous 13" lids close securely with twist-locks. Insulated models help maintain more consistent water temperature. 480gph infusor pump. Built-in water and air flow control valve. Non-slip carry handles . Easily connects to your battery .
Part No: KA29460
|
|
|
|
Cap your screws with colorful molded plastic caps. 10 per pack. Sizes: 6/8 or 10/12.
Part No: MP7992
|
|
|
|
Enjoy fresh coffee ashore or afloat with this 4-cup coffee maker that plugs into any 12V outlet. Features include a durable stainless-steel carafe, dripless pour spout, knuckle guard, 30-minute auto shut off, “On” indicator light, and a convenient “Brew Pause” feature that lets you pour a cup of coffee before brewing has finished. Includes coffee scoop and three filters. 10 1/4"H x 5 1/4"W x 7 5/8"D.
Part No: DCC-450BK12
|
|
|
|
|
Print on Demand Nautical ChartsAccurate and up-to-date, charts include latest notice to mariners corrections, NIMA and NOAA's safety updates. . Charts are printed after your order is placed, ensuring that you receive the most up-to-date information. . Approved by NOAA, meets USCG carriage requirements, SOLAS compliant and a replacement for traditional NOAA paper charts. . Distinctive graphics and vibrant colors provide easy readability under varying light conditions.
Part No: 14930 POD
|
|
|
|
|
Print on Demand Nautical ChartsAccurate and up-to-date, charts include latest notice to mariners corrections, NIMA and NOAA's safety updates. . Charts are printed after your order is placed, ensuring that you receive the most up-to-date information. . Approved by NOAA, meets USCG carriage requirements, SOLAS compliant and a replacement for traditional NOAA paper charts. . Distinctive graphics and vibrant colors provide easy readability under varying light conditions.
Part No: 14911 POD
|
|
|
|
Mitsubishi gear reduction starter. Replaces Westerbeke 34552. Nine tooth drive gear. 12vDC. CW rotation.
Part No: 99M 98175
|
|
|
|
CARBURETOR, KIT.
Part No: 18-7081
|
|
|
|
Whether your activities include cruising, fishing, sailing, kayaking or canoeing, this is an information resource for you. And this guide covers those miles with: Shore descriptions; Listings of marine facilities, boat ramps and fish camps; GPS waypoints; 134 chartlets; Black and white and color photos; Bird list and the Colonial Coast Birding Trail; Savannah River description from Augusta to Savannah; and Access information for the undeveloped barrier islands. Author: Nancy & Tom Zydler.
Part No: 1-892399-07-5
|
|
|
|
The Chesapeake Bay is the largest inland tidal body of water on the eastern seaboard, offering a wonderful combination of unspoiled natural beauty, timeless history, lively urban areas, and easy access. Accurate and up-to-date navigational information in this thoroughly revised guide pilots the reader into the Chesapeake's numerous creeks and coves—gunkholes—and into practically every other point of interest on the bay. A portrait of the bay, its history, its people, and its wildlife.
Part No: 0071363718
|
|
|
|
.
Part No: 62740P
|
|
|
|
Hayward Fishing trolling weights can be used with all makes of down-riggers.
Part No: HDRRC-08
|
|
|
|
Replaces the directional switch in the control panel for Jabsco's Economy Spotlight.
Part No: 43990-0000
|
|
|
|
Some flags shipped directly from manufacturer The British Red Duster may be flown as a courtesy flag in all British possessions The French flag may be flown as a courtesy flag in all French possessions The Netherlands Antilles flag may be used as a courtesy flag in Bonaire, Saba, Statia and Dutch St Maarten.
Part No: 192306
|
|
|
|
.
Part No: 96007
|
|
|
|
For sensitive electronics and computers, these are excellent stand-alone inverters. Prosine 1000 and 1800 Inverters offer true sine wave operation at a price that’s little more than many modified sine wave models. All feature a remotely-mountable backlit display which shows current draw, battery voltage, text fault condition and graphical power output (watts) and power save mode. Includes 30'’ of phone-type cable. Output Waveform: Pure Sine Wave . Alarms: High/low voltage, overload/overtemp.
Part No: 806-1002
|
|
|
|
Temperature, false-trip-free, AC/DC breakers For use with either AC or DC current. Magnetic circuit breakers are temperature-stable. A false-trip free mechanism prevents breaker from being held with contacts closed during overload. Switch Type: Toggle . Voltage Compatibility: AC, DC . Safety Features: Temperature stable, false-trip free. Housing Material: Plastic Housing . Dimensions: 2" x 1. 64" x . 75" . Terminal Type: Screw .
Part No: 551620
|
|
|
|
High performance spring-loaded mechanical vang for racing or cruising The Yacht Rod‘s hardened stainless spring provides the upward force necessary to support your boom in light air or when lowering the mainsail. For downward force, the block and tackle system provides efficient control of leech tension with 8:1 purchase. Tackle, Harken Blocks and mast/boom fittings included. Precipitation-hardened stainless steel spring with Fastpin adjustment is rated for over one million compression cycles.
Part No: 352050
|
|
|
|
|
.
Part No: 85320OG
|
|
|
|
These covers are designed to fit over bow rails, medium to high walk-through or one-piece windshields and other low-profile accessories. Outboard model covers come complete with a bound-in-motor hood. Covers are patterned to ft most V-hull runabouts with open or closed bows.
Part No: 70219
|
|
|
|
.
Part No: MRV-48WT
|
|
|
|
Patterned to fit V-Hull offshore fishing boats with large open cockpits, center-steering consoles, high bow rails and short windscreens. Outboard models are made to cover a single outboard. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
Part No: 85218
|
|
|
|
Teak Accessories for Cabin & Cockpit Using only plantation-grown teak, these fine accessories make life aboard more pleasant.
Part No: 99W 62550
|
|
|
|
Produces orange smoke that’s visible for up to five miles during the day. USCG approved for daytime use only. Signal Type: Orange smoke hand flare . Burn Time: One minute . Deployment Method: Match strike igniter . Type Approval: USCG daytime .
Part No: 956
|
|
|
|
.
Part No: 46184
|
|
|
|
Connecting link between Nicro snap-in ventilators and vinylvent ventilator tubing. Allows more precise ventilation of engine or fuel tank compartments.
Part No: 99W N10864HA
|
|
|
|
These rocker switches come in several different configurations for panel mounting. Available in illuminated and non-illuminated models, they feature non-glare black matte plastic housings, bezel and actuator, brass screw or blade terminals, and gasket-sealed housings. Snap-in mounting in panels from 0. 093" (2. 36mm) to 0. 187" (4.
Part No: 58328-100-BP
|
|
|
