SeaStar Helm Seal Kit from TELEFLEX
Replacement shaft seal kit HS5176 fits various post-1990 SeaStar 1. 4, 1. 7 (I), 2. 0, 2. 4 (II), SeaStar Pro and SeaStar helms.

Gunnel Guard - 1/2" Round, 1-1/2" Diameter, 20' Length from TAYLOR
These polyester-covered guards will protect your boat from dings and scratches and they won’t rot in the sun or saltwater like cotton guards. Great for use on dinghies and swim platforms, too. Fabric tabs attach easily with screws or nails. Half Round is for flat surfaces; 3/4 Round is for 90° edges. Sold in 10' or 20' lengths or by the foot up to 50'. Material: Polyester fabric/closed-cell foam . Attachment Method: Screws or nails . Shock Absorption Mechanism: Foam padding .

T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.

Air Filter for Caterpillar Engine 3116, Detroit Diesel Engines 6V92 1 Turbo, 12V92 2 Turbo, All HP, Tapered, 9" x 12" from WALKER ENGINEERING
These genuine replacement air filter elements are designed and manufactured to meet Walker's strict standards for high performance air flow, multi-ply construction, and product quality. Air filters are available in popular sizes to equip your Caterpillar®, Detroit Diesel®, or Cummins® marine engines. Please measure your filter carefully before ordering (shape and filter size should not be changed from original equipment as springs and tops will not fit properly).

Bootstripe Tape, 1'' Blue from SEAFIT
Great for use along the waterline or as an accent along the gunnelsThese self-adhesive vinyl accent stripes liven up the look of any boat. Vibrant, long lasting colors add just the right touch of pizzazz to your boat's exterior, changing it from drab and ordinary to bright, clean and beautiful. Sold in 50' rolls.

Bootstripe Tape, 2'' Black from SEAFIT
Great for use along the waterline or as an accent along the gunnelsThese self-adhesive vinyl accent stripes liven up the look of any boat. Vibrant, long lasting colors add just the right touch of pizzazz to your boat's exterior, changing it from drab and ordinary to bright, clean and beautiful. Sold in 50' rolls.

Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.

2-5/8" x 1-1/2" Euro Utility Hinge from WEST MARINE
Stamped utility hinge with 1/2" offset from TACO. Made of marine grade 304 stainless steel with polished finish, non-corrosive utility hinge is ideal for hatches, cabinets, and doors inside and outside the boat. Measures 2-5/8" x 1-1/2" x .

Ultra Blue Three-Strand Line, 1/4" Dia., 1,700lb. Breaking Strength from SAMSON ROPE
Ultra-strong line outlasts polypro two to one Made from bi-polymer olefin fiber, ultra-strong Ultra Blue is 30%–35% stronger than polypropylene and has more than twice the wear life. UV light resistance is excellent, it is easy to grip and it floats.

Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.

Drain Plug, Bronze 1/2" NPT Threaded from MJS MANUFACTURING
Don’t forget to install your trailerable boat’s drain plug and get that sinking feeling! Get the Plug Boss instead. Put the bright red anodized aluminum plug holder in the most logical place possible, on the trailer winch handle, and never forget to reinstall your drain plug when you launch your boat (or remove it when you haul out). Choose a Plug Boss to fit either the 1" rubber tee handle drain plug or a 1/2" pipe threaded bronze drain plug.

Stainless-Steel Fender Lock from TAYLOR
The "one-way" locking peg provides secure and reliable mounting and allows the use of up to 1/2" diameter line.

Diamond Pad Eye 3-1/4" from SUNCOR
Diamond Pad Eyes. Heavy-Duty, one-piece precision casting.

Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.

Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.