Triple, 1/2" - 9/16" Line Dia., 59.6oz from LEWMAR
Allows controlled release under loadThe award winning D2 Rope Clutch, built for big boat applications, allows for an easy and controlled release even at full holding power. Instead of just jamming the rope, the D2 clutch's Domino Cluster mechanism has a longer holding pattern for better grip and less rope wear. Fits line sizes from 5/16" (8mm) to 9/16" (14mm). Application: High load applications on boats to 55', low load and control lines on larger boats . Safe Working Load: 2650lb.

8mm (5/16") Stock Dia. Bolt, 4-5/16"L, 5/8" Hole Dia., 3" Stock Length, 1" Plate Dia. from SEADOG
Machined from 304 stainless steel.

T-Ball Swage Fitting, 1/8" Wire Size from ALEXANDER-ROBERTS
Electropolished 316 stainless steel. Running Back style has a stainless bail rather than a swage end, to accept Dyneema or other rope for a running backstay. *Running Back style has a stainless bail rather than a swage end to accept Spectra or other rope for a running backstay. Style: Swage . Material: Electropolished Type 316 stainless steel . Configuration: T-ball swage .

3/16" Stock Dia. U-Bolt, 1-3/8” Thread Length, 1-3/16" Hole Spacing, 1" Eye Dia. from SEAFIT
Stainless steel U-Bolts have metric threads. The top plate is held in place by small ears that are forged into the U-bolt. Includes matching backing plate. ShWt .

Large Dinghy Snatch Block, 9/16" Line Dia., 40mm Sheave Dia., 1300 SWL from HOLT ALLEN
Glass-filled nylon cheeks with 316 stainless straps increase working efficiency more than 50% with minimal weight increase. Stainless ball bearings in a polypropylene cassette. For spinnaker sheet, jib sheet turning blocks, etc. Cheek Material/Finish: Glass filled nylon. Ball Bearing: Stainless ball bearings. Opening: Hinged cheek/axle.

5/8" Clevis Pin dia., 1-3/16" inside dia., 4-pack from WEST MARINE
Stainless-Steel Cotter Rings.

"D" Shackle, 3/16" Pin Dia., 7/16" Inside Width, 1/2" Inside Length, 2500lb. Breaking Strength from HARKEN
Stainless-steel, high-resistance "D" shackles.

PVC with Polyurethane Mesh Rope Bag, 11-13/16"W x 16-11/16"H x 8-11/16"L from RONSTAN
Ronstan rope bags can be removed and stored inside the boat when not in use; all that remains in sight is the soft white plush side of the loop attachment panel—and no sharp hooks! RF3700 Series Acrylic Canvas Bags Acrylic rope bags have a classic navy style. They are lightweight, water resistant and will retain shape. Made of white, water-repellent PVC with black water-draining polyurethane mesh, these rope bags are extremely durable. Technical features include carbon tubes for easy opening.

1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.

Whale Gulper 220 Pump, 12V DC, Draw: 2.4A from WHALE PUMPS
Use this 3. Large 3/4" inlet and outlet valves are cut at 45° angles to minimize flow restriction. Ports rotate to the position you need to facilitate hose connections and it mounts vertically or horizontally—making installation a snap! It can run dry for extended periods without burnout and boasts a large diaphragm that generates up to 13' of lift. Rubber mounting feet reduce noise. Features: Will run dry without damage and pump a mixture of air and water . Large single diaphragm .

3/8" Bow/Stern Eye - 1.03" ID Between Studs x 4.63" Thread Length from SUNCOR
Bow / Stern Eye 304 Stainless Steel - Formed . Each U-Bolt set includes four nuts (two standard and two beveled) . Includes one bow plate, and one stern plate. . Threads are "UNC". . Stock size: 3/8" . ID between studs: 1. 03" . Thread length: 2. 50" .

V. 1-7/8"L x 5/8"W Eye Strap, 1/2" Fairlead Width, 1-3/8" Hole Centers, Two #10 RHMS Fasteners from RONSTAN
Eye straps are convenient for lashing points and attaching control line leads or blocks.

Stainless-Steel Pad Eye, Oblong, 2-5/8" from SUNCOR
Stainless steel pad eyes.

5/16" Wire Rope Clamp from SEADOG
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.

Diamond Pad Eye 3-1/4" from SUNCOR
Diamond Pad Eyes. Heavy-Duty, one-piece precision casting.