Top Sellers
Light for Windex 10, 15 & Sport Wind Indicators from DAVIS INSTRUMENTS
This masthead light illuminates Windex® wind indicators for perfect night sailing Illuminates reflective reference tabs on underside of the Windex 10 and 15. Mounts directly to the masthead fitting. Draws only 120mA . Mast wire not included . Made of non-corrosive materials . Replacement bulb for Model 4481503.
|
Windex 15 Wind Indicator from DAVIS INSTRUMENTS
Improved with bird-proof spike Super-sensitive to slight changes in wind direction at the masthead, Windex Wind Indicators are popular around the world because they offer such an exceptional value. They feature sapphire jewel suspension bearings, large fin/low inertia vanes and easy-to-read, fully adjustable tacking-tab system for quick reference. The choice for most sailors, the Windex 15 features a 15" vane and reflectors for high visibility day and night.
|
The Original Doel-Fin Hydrofoil from DAVIS INSTRUMENTS
Get your boat on a plane quickly by increasing the lift generated by the engine. They also allow you to go more slowly while still remaining on a plane, so fuel consumption is decreased. The injection-molded tenite polypropylene fins install easily on the cavitation plate of most outboards from 5 hp and up . Includes Mounting hardware .
|
Snap-On Cable Cover, 1/4" Wire Dia. from DAVIS INSTRUMENTS
White vinyl cable covers in 6' lengths. Tubes split down length and install in seconds.
|
Windex 10 Sport Wind Indicator from DAVIS INSTRUMENTS
Easy to remove for trailering In winds as light as 2/10th knots the sapphire suspension bearing allows the Windex to seek wind direction. No other wind vane in the world is as sensitive to extreme light air and small puffs, or as responsive when the breeze picks up. For small boats and dinghies. Includes a 10" vane, adjustable tacking tabs and glass reinforced polycarbonate J-Base for side, top or front of mast mounting. Stands only 9. 25" tall and weighs 1.
|
Tiller Tamer from DAVIS INSTRUMENTS
Smooth, adjustable control of tiller movement, for short periods of "self-steering. " Particularly useful when changing sails, motoring, etc. on short-handed boats.
|
Queaz-Away Bands from DAVIS INSTRUMENTS
Comfortable, elastic, acupressure wrist bands exert a gentle pressure on wrist points helping many people avoid the discomfort of rough seas or bumpy travel. Safe and easy to use—just slip them on over your wrists and position them for enjoyable travel. Long-lasting fabric is comfortable and washable. Carry case included. One size fits all.
|
No Spill Fuel Saver from DAVIS INSTRUMENTS
Attach the No Spill container to the hull with the powerful suction cups over the fuel tank vent when refueling. The fuel-resistant bottle will capture the runover fuel from the vent when the tank is full. Prevent stains on the hull and pollution to the environment.
|
Tab Assembly from DAVIS INSTRUMENTS
Use these replacement parts for all Windex Wind Indicators.
|
Tachometer/System Check (4"), Johnson/Evinrude outboard, 7000RPM from FARIA INSTRUMENTS
For more than 50 years, Faria has lived up to its reputation as a producer of high-quality, long-lasting instruments. The immensely readable and durable instruments in the Euro series feature bold, bright white numerals against a non-glare black background. Sculpted white pointers and low-profile black aluminum bezels make for even greater readability. Features a perimeter-lit black dial and flat glass lens.
|
Tachometer/System Check (4"), Johnson/Evinrude outboard, 7000RPM from FARIA INSTRUMENTS
Over 50 years of experience are behind every one of these Faria instrument gauges. They’re designed with an eye for sophistication and a mind for value. Perimeter lighted white dial with stylish blue and black graphics. Polished stainless steel bezel. Contoured black pointer and domed glass lens. All gauges are 12V DC with negative ground and are all internally illuminated unless otherwise noted. Include backclamp, hardware, and installation instructions. Mfr. ’s lifetime limited warranty.
|
Arrow Style Windvane from RONSTAN
Small boat wind indicators feature quality construction at a fraction of the price of other windvanes, so they are a great choice for junior sailors who might be rough on the equipment. Ronstan's new vanes are balanced for accuracy and molded in UV-stabilized nylon. The aluminum shaft can be removed from the mast bracket for trailering or security. Both the Pennant and Arrow style indicators include adjustable tacking angle arrows.
|
Telescopic Tiller Extension 29" - 48" from RONSTAN
Ronstan tiller extensions feature fluted anodized aluminum tubing for durability and rigidity and a tapered, non-slip Hyperlon grip with ball end. The Urethane universal joint can be removed without tools. Adjustable-length versions feature a fast-action adjustable shaft for additional versatility. 4732913 Aluminum Fixed 24” RF3128 5/8"Tubing Dia. , 1"Grip Dia. , 24"L, 5. 3Lbs. 1133131 Lightweight Aluminum 33” RF3129 5/8"Tubing Dia. , 1"Grip Dia.
|
|
|
Series 40 Ratchet Block, Single/Cleat, 385lb. SWL, 3.4oz. from RONSTAN
Practical Sailor's Ratchet Block Click-Off rated Ronstan's Orbit block "Overall, the most impressive with its grip, versatility, and lightweight design. " The newest addition to Ronstans Orbit range of super lightweight, fiber-reinforced blocks. Ideal for sheet applications on dinghies up to 16' and control line applications for small keel boats. There are two styles of Series 40 ratchet blocks. Many of the top Grand Prix Laser sailors are switching to Orbit blocks.
|
|
Antennas from RONSTAN, Windscribe from DAVIS INSTRUMENTS
|
|
Home -> Cordage -> Rigging Products
Schaefer Pad-Eye Cast Investment cast pad eye with round base. Safe Working load 12000 lbs. . Backing plate #97-54. . Shipping Weight: 0. 40 pounds . Length: 3". Width: 3". Eye Width: 1 1/8". Eye Height: 7/8".
Part No: 78-17
|
|
|
|
Home -> Cordage -> Rigging Products
Durable and UV-resistant nylon cover protects your lifelines from the sun and elements while the padding inside gives your lifeline a soft rest to lean on, or hike from. 1 meter long (39.
Part No: BP865
|
|
|
|
Home -> Cordage -> Rigging Products
Creates an end in a length of 1" webbing to which a snaphook can be snapped. Acetal.
Part No: PA134BK/4
|
|
|
|
Home -> Cordage -> Rigging Products
Record breezes as low as 0. 4mph or as high as 150mph (0. 2 meters/sec. ) Uses patented ultrasonic technology to read current wind speed, maximum headwind and tailwind, five-second average and running average. Responds rapidly. No moving parts—nothing to wear out or break. When the wind speed changes, it changes the speed of the sound (the Doppler Effect). A microprocessor keeps track of the changes in value, which are used to give running calculations of wind speed with exceptional accuracy.
Part No: 0276
|
|
|
|
Home -> Cordage -> Rigging Products
One convenient pre-packaged 20' length of soft, tubular blue nylon webbing.
Part No: WM 20 BLUE
|
|
|
|
Home -> Cordage -> Rigging Products
Unique plastic vanes replace standard shroud-mounted telltales. Spring attachment prevents sliding or fouling on shrouds. Effective at any angle of heel, even in the lightest winds.
Part No: 1260
|
|
|
|
Home -> Cordage -> Rigging Products
Use to hand-swage lifeline fittings. Mfr. only guarantees safe installation with this tool and method.
Part No: 00-2-3LL
|
|
|
|
Home -> Cordage -> Rigging Products
Make repairs fast with a hand sewing awl Hardwood-handled awl sews a line of lockstitches through heavy fabric—sailcloth, canvas, even leather.
Part No: C916
|
|
|
|
Home -> Cordage -> Rigging Products
Lets you connect shock cord to webbing for hiking straps, sail ties, etc. For 1" webbing and 1/4" shock cord.
Part No: PA145BK/2
|
|
|
|
Home -> Cordage -> Rigging Products
Most commonly used with Sunfish, Sailfish, Vikings or other lateen rigged boats.
Part No: PA029/4
|
|
|
|
Home -> Cordage -> Rigging Products
Find this knife in the dark! Half-serrated stainless steel blade cuts heavy materials and composite ropes without dulling. Glow-in-the-dark handle makes it easy to locate. Features a 2-7/8"L locking blade, shackle key, and marlin spike. 7-1/8"L open.
Part No: 10062
|
|
|
|
Home -> Cordage -> Rigging Products
Get accurate weather data, anytime, anywhere! Weather-on-the-spot in handheld units with convenient pocketknife design. WindMate 200 includes digital compass for wind direction, cross/head/tail wind readings and wind speed, temp and wind chill. Use it as a bearing compass! Base Type: Threaded for tripod mount . Battery Type: CR2032 Lithium battery (included) . Display Type: LCD . Dimensions: 3. 28"H x 1. 2"W x . 38" . Waterproof: Water-resistant to 4' and floats .
Part No: WM-200
|
|
|
|
Home -> Cordage -> Rigging Products
15/16" x 1-3/8" Plastic Slide 3-Pack .
Part No: PA006M/3
|
|
|
|
Home -> Cordage -> Rigging Products
Polyester elastic cord for maximum durability and UV-resistance. Swivel end fitting has stainless steel stops.
|
|
|
|
Home -> Cordage -> Rigging Products
Arts of the Sailor author Hervey Garrett Smith calls these "the finest needles made. " Made of forged steel with edges designed to be easy on sailcloth. Assortment of 20 needles .
Part No: C022
|
|
|
|
Home -> Cordage -> Rigging Products
Marine Wire Rope The unique chemistry of this top-quality rigging cable has been developed and perfected for sailboat applications. Each strand is preformed and polished to eliminate wire’s tendency to collect carbon particles and become brittle. We recommend Type 316 for use in Florida, the tropics, and other highly corrosive warm/salt water environments. 7 x 7 Lanyard Wire 1/16" diameter wire only. Similar construction to lifeline wire, but no vinyl cover. Available on 250' spool.
Part No: SC06377
|
|
|
|
Home -> Cordage -> Rigging Products
Natural rubber core covered with polyethylene braid is rot proof, UV-resistant and long-wearing plastic coated steel hooks.
Part No: 068048
|
|
|
|
Home -> Cordage -> Rigging Products
A must for catamaran sailors. Unique vane and reference arm help you determine optimum tacking angles both upwind and downwind.
Part No: 1450
|
|
|
|
Home -> Cordage -> Rigging Products
Includes aluminum shaft, brackets, and stainless fasteners for top or side mounts .
Part No: 1705
|
|
|
|
Home -> Cordage -> Rigging Products
Laughably superior to homemade products used on some Melges 24s and Ultimate 20s or Vise Grip and metric box-end wrench (which I tend to drop in the water) for these critical everyday sport boat rig tunes. " Optimize rig tension in any conditions, anytime Optimize rig tension in any conditions, anytime to improve sailing efficiency. The lower handle, in 316 stainless, fits onto the coupling nut of the turnbuckle with a self-locking collar for easy adjustment and repositioning.
Part No: RF1573-05
|
|
|
|
Home -> Cordage -> Rigging Products
Bright red, high-impact plastic vane is highly visible from deck. Needle bearing provides optimum sensitivity. Unaffected by angle of heel. Spoiler holes reduce lift. Includes both a top mount and a quick-release side-mount. Weighs only 1. 25oz.
Part No: 1310
|
|
|
|
Home -> Cordage -> Rigging Products
Machined from high quality, corrosion resistant grade 316 Stainless Steel For use with 1/8" or 5/32" Wire Only Tamper resistant clevis pin version also available Low profile termination design.
Part No: RF3220-04
|
|
|
|
Home -> Cordage -> Rigging Products
Rope Clip Webbing. Light Gray. 220 - 320 mm.
Part No: BP340
|
|
|
|
Home -> Cordage -> Rigging Products
Help your crew learn the ropes with these labels Label cleats and winches for organization and safety.
Part No: 100014
|
|
|
|
Home -> Cordage -> Rigging Products
Two each 6' and 8' straps; easily cut to fitDon’t tie it, buckle it! Strong poly webbing and acetal side-squeeze buckles offer quick, secure fastening and easier tie-ups of flaked or rolled sails. Set of four straps fits an average-size main and includes one each red, blue, green and black ties. Two each 6' and 8' straps.
Part No: SS4C-W
|
|
|
|
Home -> Cordage -> Rigging Products
Bainbridge International's plastic shackles are designed for ease of use, high strength and ability to absorb shock loads. The screw design is strongest and permits easy detachment and re-attachment .
Part No: PA027/3
|
|
|
|
Home -> Cordage -> Rigging Products
Snap these over your shrouds above the spreaders to allow genoas to roll over your spreaders and tack quickly. Fits 1/4'' wire. Can be drilled to fit up to 7/16'' wire. About 3 1/2'' dia. Also works on lifelines, inner forestays, babystays, etc.
Part No: 285
|
|
|
|
Home -> Cordage -> Rigging Products
This easily-adjusted buckle accepts a loop around one end. Acetal.
Part No: PA079BK/4
|
|
|
|
Home -> Cordage -> Rigging Products
Turn your backstay into an antenna! For your steel wire backstay to serve as an SSB or ham radio antenna, it must be electrically isolated at both ends. Swage end fittings are made from Type 316 stainless steel. For peak radio performance the stainless steel end terminals are insulated from the anodized aluminum body with a special Acetal spacer. The large external webs of the spacer help to minimize power leakage, a problem with conventional insulators particularly when wet.
|
|
|
|
Home -> Cordage -> Rigging Products
White nylon hooks with recessed knot openings.
|
|
|