Top Sellers
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
|
Hatch Riser Arm for 20" x 20" Hatch from TAYLOR
Replacement arms for Taylor hatches from 1987 to the present. Universal arms can be left or right.
|
Boat Guard Self Supporting Cover - 21'-23' Cuddy from TAYLOR
Integrated support framework protects your boat better! The innovative design of these trailerable boat covers incorporates Self-Supporting Technology that you'll find easy to install, long-lasting and, more importantly, they stay in place! Shock-corded fiberglass support poles are integrated into the cover fabric, allowing water to run right off and preventing debris from accumulating. Does not support snow loads. Self-supporting with shock-corded poles that prevent debris and water build-up.
|
Fleece Fender Cover, Fits Fenders 10" x 26", Black from TAYLOR
Perfect for use with Big B and other center-tube style fenders, these 100% polyester fleece covers will provide posh protection for your boat! Made of rugged, 12-ounce Blizzard fleece, they are UV- light and tear-resistant. The draw string hem enables adjustment for a snug fit and also permits removal for washing.
|
T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
T-Top Boat Cover, Center-Line Length 19'5" to 20'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
Single Deck Chair Cover, 24"H x 24"W x 22"D from TAYLOR
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
|
Back-to-Back Lounge Chair Seat Cover, 22"H x 50"W x 22"D from TAYLOR
Breathable rip/stop polyester fabric plus air vents provide optimum protection and ventilation for your seats, especially in hot and humid climates. Polyurethane coating on the inside prevents color transfer or bleed-through . Comes with drawstring hem . Available for most popular seat styles .
|
84”L Fiberglass Bow from TAYLOR
Bows moounted in bow sockets are the sure and easy way to keep a boat cover taut and free from water-collecting pockets. Sockets can be mounted on any rail system or anywhere on deck wall. Rubber gasket provides snug fit for fiberglass bows. Super strong and flexible, will not take a “set”. Cut to desired length. Incude rubber end covers to grab socket.
|
Replacement Gas Strut, 12" Compressed x 20" Extended Length, 40lb. Rating from TAYLOR
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
|
Replacement Gas Strut, 9.5" Compressed x 15" Extended Length, 30lb. Rating from TAYLOR
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
|
Gunnel Guard - 1/2" Round, 1-1/2" Diameter, 20' Length from TAYLOR
These polyester-covered guards will protect your boat from dings and scratches and they won’t rot in the sun or saltwater like cotton guards. Great for use on dinghies and swim platforms, too. Fabric tabs attach easily with screws or nails. Half Round is for flat surfaces; 3/4 Round is for 90° edges. Sold in 10' or 20' lengths or by the foot up to 50'. Material: Polyester fabric/closed-cell foam . Attachment Method: Screws or nails . Shock Absorption Mechanism: Foam padding .
|
Pontoon Captain's Stand, 33"H x 26"W x 19"D from TAYLOR
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
|
Adjustable Lock from TAYLOR
Three-part system provides easy snap-on/snap-off fender attachment and adjustment. A stainless base mounts to your boat, into which a peg snaps to hold the fender strap (sold separately). Fixed peg requires tying a knot to secure the fender at the desired height. Adjustable peg - adjust fender height by simply pulling on the strap. Max.
|
Welcome Aboard Mat, Navy, 18" X 30" from TAYLOR
High-quality, marine-grade mats will add spice to any deck or door. Made from plush carpet that is waterproof, stain- and fade-resistant. Mats are mold- and mildew-resistant and feature a nonskid rubber backing.
|
|
Cover from TAYLOR, 96"Beam from TAYLOR, L from AFTCO, 96" Beam from TAYLOR
|
|
**98-05SUGRSND TAN 2+4 DC JT P.
Part No: 66218UB
|
|
|
|
Medium screw-base (Edison E26/E27) LED bulbs offer an energy-saving solution to incandescent lighting. Soothing warm white light. Offer low power draw and ultra-long service life: 50,000 hours. Impact and shock resistant. 8-18V DC. . U. S. made high flux LED. *Click here for the Dr.
Part No: 8001283
|
|
|
|
Cap your screws with colorful molded plastic caps. 10 per pack. Sizes: 6/8 or 10/12.
Part No: MP7991
|
|
|
|
These durable lightweight covers are ideal for protection on the mooring or in storage (not meant for trailering). Features a 70-Denier lightweight polyester fabric that’s the perfect blend of economy and simplicity.
Part No: 70286
|
|
|
|
Plus, it features extra large armholes, short length and stretchy, adjustable neoprene shoulders that follow your movement without hindering it for ultimate mobility. Perfect for high-action paddlesports, day sailing and dinghy racing. USCG Type: Type III . Intended Use: Day sailing, recreational boating, paddlesports . Features: Environmentally friendly Gaia foam is more flexible than other foams; short-waisted, large armholes and neoprene adjustable shoulders for full freedom of movement .
Part No: 6166BLU-04-WMP
|
|
|
|
INVISIBILITY! If the fish can’t see it…it can’t get spooked. The scientists at Pure Fishing have spent years developing the perfect formula for a family of lines that deliver ultimate sensitivity and low visibility. Berkley® FireLine® Crystal If it were any clearer it, it would be a mono. First translucent superline for near invisibility underwater.
Part No: 1123873
|
|
|
|
|
Bluefever Sp Lr Glove L|Bluefever Sp Lr Glove L.
Part No: BFSPLR-10
|
|
|
|
|
2-Year DOP From 700 To 849. 99|2-Year DOP From 700 To 849.
Part No: 1YR DOP 700-849
|
|
|
|
Switching and circuit protection in a single device. Self-trimming case eliminates the need for mounting panels or trim bezels and permits easy installation with a standard sized hole saw. Large clearance around 5/16" terminal studs accept heavy gauge wire lugs and allows high-torque connections. Ignition-protected—safe for installation aboard gasoline-powered boats. Interrupt rating: 5000A at 12V DC. Switch Type: Toggle. Safety Features: "Trip Free" design.
Part No: 7039
|
|
|
|
For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers.
Part No: 30-016
|
|
|
|
This convenience light weight bucket can be used to hold a wide variety of items.
Part No: TTG11
|
|
|
|
Arco Tilt/Trim Motor - Model #6217.
Part No: 99M 6217
|
|
|
|
For: 4, 85 & 115 horsepower models from 1968 and up.
Part No: 18-6525
|
|
|
|
The proprietary formulation of EVA outer jacketing is the toughest in the industry. Snap-lock terminals with B-style wire crimps provide the strongest terminal retention values in the industry. Only original equipment style silicone spark plug boots, distributor nipples, and wire lengths are used to manufacture PowerPath wire sets. PowerPath's high energy fiberglass core delivers maximum voltage to the spark plugs without the electronic interference that can distort instrument readings. Mfr.
Part No: 700701
|
|
|
|
|
IMPELLER.
Part No: 18-3094
|
|
|
|
Bright and durable 20" buoys are great for marking anchors, moorings, swim areas or for creating a PWC race course.
Part No: B-20R
|
|
|
|
.
Part No: 921510
|
|
|
|
.
Part No: 140
|
|
|
|
Unique blend of special high-grade oils that is formulated without viscosity improvers, yielding premium quality multiviscosity 4-cycle motor oil. Specially formulated for Mercruiser engines, and suitable for use in both gasoline and diesel engines.
Part No: 858049Q01
|
|
|
|
Some flags shipped directly from manufacturer The British Red Duster may be flown as a courtesy flag in all British possessions The French flag may be flown as a courtesy flag in all French possessions The Netherlands Antilles flag may be used as a courtesy flag in Bonaire, Saba, Statia and Dutch St Maarten.
Part No: 191619
|
|
|
|
4'' x 7'' convex mirror mounts to the windshield frame on either side of the boat.
Part No: 11110
|
|
|
|
Temperature, false-trip-free, AC/DC breakers For use with either AC or DC current. Magnetic circuit breakers are temperature-stable. A false-trip free mechanism prevents breaker from being held with contacts closed during overload. Switch Type: Toggle . Voltage Compatibility: AC, DC . Safety Features: Temperature stable, false-trip free. Housing Material: Plastic Housing . Dimensions: 2" x 1. 64" x . 75" . Terminal Type: Screw .
Part No: 551605
|
|
|
|
Used with 110V AC main circuits so that both the hot and neutral conductors are disconnected. Same features as single pole breakers. White toggles. Switch Type: Toggle . Voltage Compatibility: 110V AC . Safety Features: Temperature stable, false-trip free . Housing Material: Plastic . Housing Dimensions: 1. 48"W x 2. 00"L x 1. 84"D .
Part No: 552830
|
|
|
|
Chrome-plated or plain bronze body with 316 stainless fittings. Working load should not exceed 40% of tensile strength.
Part No: 38TFBJ
|
|
|
|
Patterned to fit V-Hull offshore fishing boats with large open cockpits, center-steering consoles, high bow rails and short windscreens. Outboard models are made to cover a single outboard. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
Part No: 85219
|
|
|
|
First, they provide lots of warmth, reducing the chances of hypothermia onset in cold weather. Second, they look and feel like jackets, not safety gear, so they are more likely to be worn. Waist-length jackets with a front zipper and storm flap. Fleece-lined collar, big front pockets and a knit waistband with adjustable belt. Filled with ultra-soft flotation foam inside innovative sealed compartments. There’s no chance that the foam can become waterlogged over time. Type III USCG approved.
Part No: 7077N/F-06-000
|
|
|
|
Silver gray 11-oz. poly/cotton fabric is water repellent and mildew resistant. Covers feature bound edges, draw-rope in hem and they're cut to fit close for trailering.
Part No: 926111
|
|
|
|
|
.
Part No: 71226
|
|
|
|
Patterned to fit V-Hull boats with extended forward deck areas and reduced cockpit space. These covers will fit boats with low- to medium-profile bow rails and high windshields. Outboard models are made to cover a single outboard. 4-ply fold-over seams . 1", heavy-duty, UV-resistant tiedowns . 1,000s of styles & sizes to fit nearly any boat . Designs that fit outboard and inboard motors . Tough enough to handle over-the-road trailering . Poly Cotton Fabric: Trailerable .
Part No: 72724
|
|
|
|
Sierra's leadership in the marine industry continues with the addition of 20 new belts and 8 new hoses for late model stem drive and inboard application. An industry first, Sierra is excited to announce its new line-up of Serpentine belts. 14 Serpentine belts for late model coverage on Mercruiser V6 and V8 big/small block applications. Belts are polyester corded for long-life and durability. Hoses are molded for exact fit and precise installation.
Part No: 18-15104
|
|
|
