Top Sellers
Aluminum Transom Support Master Mounting Kit from TELEFLEX
Universal mount for most outboard engine steering applications. This kit includes the Teleflex Outboard Clamp Block, Support Tube, and the Clevis Kit.
|
"Little" Crane, 175 lb. Capacity, 30" Arm Reach, 7:1 Purchase, 75' Line Length from ST. CROIX MARINE
Precision engineered and fabricated from stainless steel, these removable cranes lift heavy loads with ease. Best of all, it takes just 20 seconds to set up or remove for storage. Optional spare mounting kits (VPN #176 & 196) include a set of brackets and rail clamps for an extra mounting location. Material: Polished stainless steel. Height: 60" mast height. Mounting Style: Horizontal or vertical mounting to railing. Included Equipment: Complete kit with mounts and 5/16" line.
|
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
|
|
BayStar Helm Seal Kits from TELEFLEX
Replacement front seal kits for both front and rear mount helms. HS5147 fits BayStar front mount and SportTilt helms . Contains 3 screws, shaft seal and o-ring seal.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Prop Nut Kit, Yamaha V4/V6 from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
Big-T Rotary Helm from TELEFLEX
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
|
Fuel Sending Unit Only - 4-24'' Tank from TELEFLEX
Complete kit includes a reliable dash-mount gauge with a black face and white numerals. The triple patented sending unit has an adjustable float arm and U-channel that fits virtually all tanks from 4"-24" deep. Compatible with 12V DC systems with common or insulated ground.
|
Waterguard Cartridge Filter from SHURFLO
No more "boat water" taste! Enjoy great tasting, healthy, clean water on your boat or RV. Filters chlorine, sediment, lead and cysts. Features easy installation and a no-mess, disposable, quick-twist carbon block filter that you can change in seconds. Kit includes head, cartridge, winterizing diverter, fittings and mounting hardware. Filter is 12"H x 2. 5"W. One year warranty. Ensures drinking water tastes good and is safe to drink.
|
Service Kit for 30124-0000 Bilge Pump, 8 GPM from JABSCO
Kit includes Connecting rod. Diaphragm. Ppulsation dampener. Valve plate. Valve set (inlet and outlet) .
|
|
from SUNCOR, Cranberry from TAYLOR, Mounting Kit from SIERRA, 000 from NIMA
|
|
Print on Demand Nautical ChartsAccurate and up-to-date, charts include latest notice to mariners corrections, NIMA and NOAA's safety updates. . Charts are printed after your order is placed, ensuring that you receive the most up-to-date information. . Approved by NOAA, meets USCG carriage requirements, SOLAS compliant and a replacement for traditional NOAA paper charts. . Distinctive graphics and vibrant colors provide easy readability under varying light conditions.
Part No: 14902 POD
|
|
|
|
|
Print on Demand Nautical ChartsAccurate and up-to-date, charts include latest notice to mariners corrections, NIMA and NOAA's safety updates. . Charts are printed after your order is placed, ensuring that you receive the most up-to-date information. . Approved by NOAA, meets USCG carriage requirements, SOLAS compliant and a replacement for traditional NOAA paper charts. . Distinctive graphics and vibrant colors provide easy readability under varying light conditions.
Part No: 14932 POD
|
|
|
|
Defense Mapping Agency charts (now known as National Imagery and Mapping Agency or NIMA charts) are U. S. government charts of waters other than the territories and possessions of the U. S. (see NOAA charts for coverage of U. S. territories).
Part No: 52140
|
|
|
|
Tidy-Ups™ Kits include one Tidy-Ups Fender adjuster and five feet of 3/8" solid braid polypropylene rope. Made from high-quality marine grade components, Tidy-Ups fender adjusters are quick and easy to use. Simply snap adjuster over your lifeline, railing or stanchion and set fender height in an instant. Polypropylene rope is color-matched to your Super Gard fender (available in 8 colors). Rope will not fade or kink, and is mildew and rot resistant.
Part No: 1135
|
|
|
|
Stainless steel. 4479630 - 5/8" dia. - 100 lbs WLL. 4479648 - 3/4" dia.
Part No: C0174-0002
|
|
|
|
Sierra's leadership in the marine industry continues with the addition of 20 new belts and 8 new hoses for late model stem drive and inboard application. An industry first, Sierra is excited to announce its new line-up of Serpentine belts. 14 Serpentine belts for late model coverage on Mercruiser V6 and V8 big/small block applications. Belts are polyester corded for long-life and durability. Hoses are molded for exact fit and precise installation.
Part No: 18-15105
|
|
|
|
The most powerful and feature-packed for the bow of your boat!These trolling motors feature ultra-responsive steering, a heavy duty mount that boasts superior strength and an indestructible composite shaft that flexes on impact so you can go right on fishing. These motors also feature the Bowguard 360° Breakaway Mount that breaks away on impact from any angle to protect motor, shaft and boat. 5 speed or variable speed depending on model. Steering Type: Tilt foot control or tilt control handle.
Part No: 1368601
|
|
|
|
Eliminate lost keys! . Replacement push-up cap, fits most standard 316 stainless steel deck fills for 1 1/2" hose .
Part No: 6961CBLUE
|
|
|
|
Protect your marine radio from damage and tough conditionsProtective bezel and cover will guard against splashes and spray to extend the life of your onboard stereo. Flip-up cover offers easy access to your radio. Constructed of UV resistant plastic.
Part No: SG1
|
|
|
|
3-Year From 300 To 349. 99|3-Year From 300 To 349.
Part No: 2 EX 300-349.99
|
|
|
|
|
WIRING SET-MERC-METAL CORE 7mm|WIRING SET-MERC-METAL CORE 7mm.
Part No: 18-5227-1D
|
|
|
|
|
Print on Demand Nautical Charts Accurate and up-to-date, charts include latest notice to mariners corrections, NIMA and NOAA's safety updatesCharts are printed after your order is placed, ensuring that you receive the most up-to-date informationApproved by NOAA, meets USCG carriage requirements, SOLAS compliant and a replacement for traditional NOAA paper chartsDistinctive graphics and vibrant colors provide easy readability under varying light conditions.
Part No: 16103 POD
|
|
|
|
New durable, heavy-duty accessories for your Cannon Tournament Series downrigger stand ready to help you further enhance your edge over the beasts of the big water. Bases and mounts are constructed from marine grade 316 stainless steel to resist rusting, pitting and the corrosive effects of saltwater use. Polished to a mirror finish. Mounting hardware included. Tilt-up bracket locks in the upright and down positions to allow your downrigger to be tilted in either position.
Part No: 1903002
|
|
|
|
Pet bowl mats offer the same great features as the standard mats in Beige with Beige binding.
Part No: 44080
|
|
|
|
Wagan’s Power Dome EX™ provides emergency power and a whole lot more! This rugged multi-purpose portable power center is perfect for marine, automotive or home emergency use. Use it as a power source for 110V AC or 12V DC applications such as computers, TVs, fax machines, audio, fans, electrical tools, etc. It can also start your car engine in an emergency situation. Jumper cables nest neatly at each end and the airhose stores in a compartment at the back. 40A external fuse.
Part No: 2454
|
|
|
|
Sealed keyed switches with integral Deutsch connectors feature fully sealed contact areas with O-rings and ultrasonic welding to IP67 waterproof rating. High-impact plastic for corrosion resistance and tested to SAE J259 for ignition switches. Contact rating: 10A@12V DC, 5A@24V DC. Panel thickness: 3/8".
Part No: 95060-60-BP
|
|
|
|
Xantrex TrueCharge2 battery chargers lead the industry with a small footprint and ultra-compact design. With certified ignition protection, even a gasoline engine room is a safe option for installation. Designed primarily for marine and commercial applications worldwide, TrueCharge2 battery chargers are versatile enough to be used in a wide variety of conditions and locations. Auto-ranging AC input voltage capability (90-270V AC) makes traveling abroad and handling poor-quality power a breeze.
Part No: 804-1220
|
|
|
|
Ideal for hot weather! Slim belt pack delivers greater freedom of movement and versatility and it’s one of the most comfortable PFDs in hot weather. Provides 32lb. of buoyancy. Recommended for adults who are good swimmers because it must be slipped over the head after the manual ripcord inflation. 5"W belt adjusts to fit most waists. Includes a backup oral inflation tube, inflation cylinder and pin. Buoyancy: 32lb. . Activation Method: Manual . Inflator Type: Secumar 401 3F .
Part No: 278BLK-00-WMP
|
|
|
|
Designed to lay over your boat’s gunnel, and with your choice of design, salutation or admonition, these mats are a great way to protect your gelcoat and greet your guests. Mats feature non-skid backings, are made of heavy marine canvas and weighted at each end to assure that they stay put in a breeze.
Part No: BSO-20 BLACK
|
|
|
|
Not sure what to get for your favorite boater? Give the West Marine Gift Card! Use our Gift Card at more than 370 West Marine stores, online, or through our catalog at 1-800-BOATING for merchandise purchases and backorder or special order deposits. . SHIPPING NOTICE: Gift Cards shipping ground delivery will ship 1st Class Mail to any US address FREE. For an additional fee, Gift Cards may be shipped via US Priority Mail, Two-Day or Overnight service. The Gift Cards cannot be redeemed for cash.
Part No: GC-0500
|
|
|
|
Selected tank elbows - choose the model recommended by the manufacturer of your tank.
Part No: 18-8040
|
|
|
|
Troll with ease! Troll multiple lines hassle-free, by using Pompanette's rocket launcher. Rugged and sleek, the rocket launcher comes with 4 Pompanette rod holders, bait tray and drawer. Features: Padded Back. 4 rod holders. Bait tray.
Part No: INT4555DRAWER
|
|
|
|
90° Fitting, 1" NPT x 1.
Part No: 18-8112
|
|
|
|
Exhaust Manifold Mounting Kit Chrysler Big Block V8 383-440cu. in.
Part No: 18-8517
|
|
|
|
Exhaust Manifold Mounting Kit Crusader GM Small Block V8 305-350cu. in.
Part No: 18-8521
|
|
|
|
(1979-1989)and multiple application Ford and GM Risers.
Part No: 18-8534
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
|
|
|
|
Very common pushbutton breakers for DC loads. Uses two-blade terminals. Mounts in 3/8" hole. Can be used with a waterproof boot over the button. Buttons are white. Switch Type: Pushbutton . Voltage Compatibility: DC . Safety Features: Waterproof boots available . Housing Material: Plastic . Housing Dimensions: 1. 75" x 1.
Part No: 5321484
|
|
|
|
Breathable rip/stop polyester fabric plus air vents provide optimum protection and ventilation for your seats, especially in hot and humid climates. Polyurethane coating on the inside prevents color transfer or bleed-through . Comes with drawstring hem . Available for most popular seat styles .
Part No: 80210
|
|
|
|
|
Breathable rip/stop polyester fabric plus air vents provide optimum protection and ventilation for your seats, especially in hot and humid climates. Polyurethane coating on the inside prevents color transfer or bleed-through . Comes with drawstring hem . Available for most popular seat styles .
Part No: 80240
|
|
|
