Welcome! Please Sign-In
Top Sellers
Dielectric Silicone Compound from ANCOR MARINE
Dielectric Silicone Compound from ANCOR MARINE
A silicone "grease" that's great for waterproofing coax connections, butt splices, and other sliding electrical connections. 1/3-oz.
Twisted Pair Wire with Shield from ANCOR MARINE
Twisted Pair Wire with Shield from ANCOR MARINE
Similar to Ancor duplex wire, except that the conductors are twisted and surrounded by a copper shield for extra protection against noise and electrical interference. Red/black conductors. Recommended by ABYC for DC wiring near compasses and other magnetically - sensitive devices. Sold per foot. Wire Type: Twisted Pair . Construction: Tinned Copper . Conductors (Color and # of): 1 Red, 1 Black . Color of Exterior Insulation: White . Shielding: Copper Shield . Approvals: UL, ABYC, CSA .
Electric Bilge Pump Installation Kit from ANCOR MARINE
Electric Bilge Pump Installation Kit from ANCOR MARINE
Essential items for installing a bilge pump Convenient package includes four #8 x 3/4" stainless-steel panhead screws, one 1-3/4" x 3/4" stainless steel hose clamp, and three 16-14AWG heat shrink butt connectors.
G4 BI-PIN Base, 24V, 10W, 0.42A, 11CP from ANCOR MARINE
G4 BI-PIN Base, 24V, 10W, 0.42A, 11CP from ANCOR MARINE
Keep spare bulbs handy in case of burnouts or breakage.
30 Amp Circuit Breaker with Black Toggle from ANCOR MARINE
30 Amp Circuit Breaker with Black Toggle from ANCOR MARINE
Temperature, false-trip-free, AC/DC breakers For use with either AC or DC current. Magnetic circuit breakers are temperature-stable. A false-trip free mechanism prevents breaker from being held with contacts closed during overload. Switch Type: Toggle . Voltage Compatibility: AC, DC . Safety Features: Temperature stable, false-trip free. Housing Material: Plastic Housing . Dimensions: 2" x 1. 64" x . 75" . Terminal Type: Screw .
30 Amp Double-Pole Circuit Breaker from ANCOR MARINE
30 Amp Double-Pole Circuit Breaker from ANCOR MARINE
Used with 110V AC main circuits so that both the hot and neutral conductors are disconnected. Same features as single pole breakers. White toggles. Switch Type: Toggle . Voltage Compatibility: 110V AC . Safety Features: Temperature stable, false-trip free . Housing Material: Plastic . Housing Dimensions: 1. 48"W x 2. 00"L x 1. 84"D .
In-Line Holder, for #12 Wire, for ATC & ATO Fuses, 30A from ANCOR MARINE
1/4" - 5/16" Anchor connector from WEST MARINE
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
Swivel Anchor Connector, 5/16"–7/16" Chain, 2750lb. SWL from WEST MARINE
Swivel Anchor Connector, 5/16"–7/16" Chain, 2750lb. SWL from WEST MARINE
18-8 stainless swivel connectors prevent snagging at the anchor/chain connection, slide easily over anchor rollers and prevent the chain from becoming twisted while the anchor is set. Attach with a single set screw (using the Allen wrench included).
West Marine/SOSpenders PFD Rearming Kit, 3/8" Threaded Cylinder Neck Dia. from WEST MARINE
West Marine/SOSpenders PFD Rearming Kit, 3/8" Threaded Cylinder Neck Dia. from WEST MARINE
West Marine/SOSpenders PFD Rearming Kit Style: Automatic. Cylinder Weight: 38g. Cylinder Neck Diameter: 3/8" or 1/2" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: West Marine/SOSpenders PFD . Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
Marine Silicone Sealant, Clear, 10oz. Tube from WEST MARINE
Marine Silicone Sealant, Clear, 10oz. Tube from WEST MARINE
Use wherever a flexible, removable seal is required A specially-formulated marine silicone that won’t sag, shrink or turn yellow. Can be used above and below the waterline wherever a flexible, removable seal is required. Excellent for bedding deck fittings and hardware that you may want to remove at some time. Also good for insulating between dissimilar metals to prevent galvanic corrosion. Formulation: One-part silicone sealant . Bonds to non-oily woods, metal, fiberglass, glass, plastics .
Marine-Tex Putty, Gray, 14oz. from TRAVACO
Marine-Tex Putty, Gray, 14oz. from TRAVACO
Versatile epoxy putty for wide variety of repairs Repairs damaged hulls and equipment stronger than before. Fixes gel coat chips and leaks in fuel tanks, water tanks, piping, engine blocks, cracked crank cases, etc. Can be used in working temperatures of -40° to 250°F. Marine-Tex bonds to all metals, plastics, plywood, etc. Handles like putty. Formulation: Two-part epoxy putty . Recommended Usage: Bonds to aluminum, PVC, fiberglass, most plastics, metals, glass, cement and hard/soft woods .
Scotchgard Marine Liquid Wax, 500ml from 3M PRODUCTS
Scotchgard Marine Liquid Wax, 500ml from 3M PRODUCTS
Durable wax actually bonds to your boat's surfaceSpecial formulation uses reactive chemistry to actually bond to your boat’s surface and provide exceptionally high gloss with lasting durability. Protects gelcoat and topside coatings from damaging ultraviolet radiation, and is excellent for use on gelcoat, topside paints, painted aluminum and marine metal parts. Uses reactive chemistry to bond to your boat's surface. Exceptionally high gloss with lasting durability.
Scotchgard Marine Liquid Wax, 1Liter from 3M PRODUCTS
Scotchgard Marine Liquid Wax, 1Liter from 3M PRODUCTS
Durable wax actually bonds to your boat's surfaceSpecial formulation uses reactive chemistry to actually bond to your boat’s surface and provide exceptionally high gloss with lasting durability. Protects gelcoat and topside coatings from damaging ultraviolet radiation, and is excellent for use on gelcoat, topside paints, painted aluminum and marine metal parts. Uses reactive chemistry to bond to your boat's surface. Exceptionally high gloss with lasting durability.
Marine Formula Sta-Bil, 32oz. from STA-BIL
Marine Formula Sta-Bil, 32oz. from STA-BIL
Marine Formula Sta-BilNew, concentrated formula designed to fight the damaging effects of Ethanol Improves engine performance year-round — not just for seasonal storage.

Splice Connectors from ANCOR MARINE

Splice Connectors from ANCOR MARINE Home -> Electrical -> Switches, Fuses & Accessories
Splice connectors, 18-14 ga.
Part No: 230615
Heavy Cable Crimping Tool from ANCOR MARINE Home -> Electrical -> Switches, Fuses & Accessories
Spring loaded pivot bar. Crimps #6 to #4/0 wire with the aid of a hammer or vise. Functions: Crimps lugs and terminals onto wire . Wire Gauges Handled: 6-4/0AWG . Length: 6. 25". Tool Materials: Steel with a hardened pivot pin .
Part No: 701010
Hatch/Door Jamb Switch in Boot SPST from COLE HERSEE Home -> Electrical -> Switches, Fuses & Accessories
Can be used in momentary applications where a small switch is required such as doors and hatches. Black rubber boot covers and protects the face of the switch. Dust-resistant. SPST normally closed OFF with plunger depressed, spring return to ON. 4A@12V DC lamp load.
Part No: 9006-BP
Multi-Die Ratcheting Crimper Kit from WEST MARINE Home -> Electrical -> Switches, Fuses & Accessories
Five crimping tools in one! This crimper comes with five interchangeable dies for crimping all kinds of electrical connectors—coaxial, non-insulated, insulated, open-barrel and insulated cord end terminals. Crimps in one motion, relieving hand strain and fatigue. Includes release lever. Housed in a rugged case. Functions: Crimps most electrical connectors with five dies . Wire Gauges Handled: 24-10AWG . Length: 8-5/8" . Tool Materials: Coated steel, PVC handle .
Part No: J6B-ABCDE
Standard 5 Amp AGA Fuses from ANCOR MARINE Home -> Electrical -> Switches, Fuses & Accessories
Corrosion-resistant construction, each fuse tested twice to ensure the highest quality. 20 Design Amps. 5 Enclosed glass tube designed for safety. 1/4" diameter x 5/8" long.
Part No: 604200
M-482 OFF/ON Push-Pull Switch from COLE HERSEE Home -> Electrical -> Switches, Fuses & Accessories
Normally off, with a variety of connections when pulled. Heavy-duty, noncorrosive construction with moisture-repellent insulators. Brass case, stem, terminals and mounting hardware. All knobs are screw-on type. Stems: 3/8"dia. x 1 1/4"L. 6–36V DC. Rated for 10A at 12V DC. M-482 Off/On Switch Gasket-sealed case protects against dirt and moisture. Chrome-plated 7/8"dia. brass knob.
Part No: M-482-BP
M-626 Extra Heavy-Duty Switch from COLE HERSEE Home -> Electrical -> Switches, Fuses & Accessories
Same as M-490 but with black moisture-repellent cover which snaps over face nut. Fits panels up to 1" thick.
Part No: M-626-BP
Boat Kill Switch Keys with Lanyard from KWIK TEK, INC. Home -> Electrical -> Switches, Fuses & Accessories
This lanyard with six keys will save the day if you ever lose or break your kill switch key and can’t start your engine. Includes six keys that fit all Johnson, Evinrude, Mercury, Yamaha, and Honda kill switches.
Part No: BKS-6
Liquid Electrical Tape from WEST MARINE Home -> Electrical -> Switches, Fuses & Accessories
Paint it on to form a seal that locks out moisture. The UL-listed formula is fast drying and adheres to metal, plastic, vinyl, rubber and composite surfaces. 4 fl. oz. container with built-in brush applicator.
Part No: 544171BC
Bulb - 12V Spreader Light from SEAFIT Home -> Electrical -> Switches, Fuses & Accessories
35W, 12V sealed beam lamp replaces bulb on Seafit Spreader Lights, Model # 151050 and # 151043.
Part No: P00803-01
Fuse Holder Cap from PERKO Home -> Electrical -> Switches, Fuses & Accessories
Molded from durable plastic, flexible to mount on curved or flat surfaces, fitting fuse size 1 1/4" x 1 1/4". Please note this is the CAP ONLY.
Part No: 0522DP
M-531 3-Position Push-Pull Switch from COLE HERSEE Home -> Electrical -> Switches, Fuses & Accessories
Normally off, with a variety of connections when pulled. Heavy-duty, noncorrosive construction with moisture-repellent insulators. Brass case, stem, terminals and mounting hardware. All knobs are screw-on type. Stems: 3/8"dia. x 1 1/4"L. 6–36V DC. Rated for 10A at 12V DC.
Part No: M-531-BP
M-476 3-Position Push-Pull Switch from COLE HERSEE Home -> Electrical -> Switches, Fuses & Accessories
Normally off, with a variety of connections when pulled. Heavy-duty, noncorrosive construction with moisture-repellent insulators. Brass case, stem, terminals and mounting hardware. All knobs are screw-on type. Stems: 3/8"dia. x 1-1/4"L. 6–36V DC. Rated for 10A at 12V DC.
Part No: M-476-BP
225-Piece Electrical Repair Kit from ANCOR MARINE Home -> Electrical -> Switches, Fuses & Accessories
An electrical repair kit for serious cruisers. With strip/crimp tool. 55 assorted butt connectors. 95 assorted ring terminals. 35 assorted disconnects. 35 assorted nylon cable ties. Assorted 10' coils or UL marine grade wire.
Part No: 220020
Automatic Wire Stripper from ANCOR MARINE Home -> Electrical -> Switches, Fuses & Accessories
Gently removes insulation from Ancor wire.
Part No: 702030
Replacement Lanyard for Emergency Cut-Off Switch from SIERRA Home -> Electrical -> Switches, Fuses & Accessories
Replacement coiled lanyard for emergency cut-off switch.
Part No: MP40990
Micro Therm Torch from ANCOR MARINE Home -> Electrical -> Switches, Fuses & Accessories
Self-igniting, butane-fueled heat gun is ideal for heat shrink applications, stretching and bending vinyl, plastic and PVC. Flameless. 650°C. Compact unit fits easily in your toolkit.
Part No: 702027
Breaker Panel Plugs (2) from ANCOR MARINE Home -> Electrical -> Switches, Fuses & Accessories
Used in electrical control panels.
Part No: 553020
M-628 OFF/ON Push-Pull Switch from COLE HERSEE Home -> Electrical -> Switches, Fuses & Accessories
Normally off, with a variety of connections when pulled. Heavy-duty, noncorrosive construction with moisture-repellent insulators. Brass case, stem, terminals and mounting hardware. All knobs are screw-on type. Stems: 3/8"dia. x 1 1/4"L. 6–36V DC. Rated for 10A at 12V DC. M-628 Off/On Switch Chrome-plated 7/8"dia. brass knob.
Part No: M-628-BP
M-612 Recessed Button Switch from COLE HERSEE Home -> Electrical -> Switches, Fuses & Accessories
Like M-490, but with recessed button and flanged face nut to prevent accidental activation.
Part No: M-612-BP
Professional Wire Cutter from ANCOR MARINE Home -> Electrical -> Switches, Fuses & Accessories
Cut stranded copper wire from 22AWG to 2/0AWG copper wire and cable (not for steel). Shears produce a very smooth cut without deforming the wire like diagonal cutters do. Functions: Cuts Wire and Cable Wire . Gauges Handled: 22AWG to 2/0AWG . Length: 9" . Tool Materials: 9-gauge steel, PVC handle .
Part No: 702005
Battery Cable Stripper from ANCOR MARINE Home -> Electrical -> Switches, Fuses & Accessories
Constructed with a swivel blade for circular and longitudinal cuts. Adjustable blade cutting height.
Part No: 702065
M-608 Moisture-Sealed Switch from COLE HERSEE Home -> Electrical -> Switches, Fuses & Accessories
Plasticized body helps seal against moisture and dirt. Includes two 18-gauge wire leads 12"L. Fits panel up to 1/2" thick.
Part No: M-608-BP
Combination Fuse and Terminal Block from COLE HERSEE Home -> Electrical -> Switches, Fuses & Accessories
Four circuits in brass with molded plastic base. Rated 20A@12– 32V DC. For 1 1/4" x 1/4" fuses.
Part No: M-674-BP
Dual Outlet Receptacle from WEST MARINE Home -> Electrical -> Switches, Fuses & Accessories
Add an extra 12V accessory receptacle and at the same time extend the reach of your 12V devices by 12".
Part No: SC-310-12
Cable Tie Kit from ANCOR MARINE Home -> Electrical -> Switches, Fuses & Accessories
A must for every onboard toolbox, cable ties are used for creating tidy wire bundles and dozens of other jobs.
Part No: 350025
Write-On Identification Heat Shrink Tubing from ANCOR MARINE Home -> Electrical -> Switches, Fuses & Accessories
For permanently labeling wires—mark on it with any ballpoint pen, or use the tractor-feed panels on the sides for a typewriter or printer. Flattened tubing is easy to write on. Heating and shrinking makes the writing permanent. Note: Not for use with adhesive-lined terminals. Not adhesive lined. 10-pack.
Part No: 300145
Waterproof Plug Connector from AQUA-SIGNAL Home -> Electrical -> Switches, Fuses & Accessories
Five-pole plug connector is double-sealed with O-rings. Impact-resistant glass-reinforced polycarbonate. Horizontal mounting. Wire inlet size: 3/8".
Part No: 80100-7
M-532 3-Position Push-Pull Switch from COLE HERSEE Home -> Electrical -> Switches, Fuses & Accessories
Normally off, with a variety of connections when pulled. Heavy-duty, noncorrosive construction with moisture-repellent insulators. Brass case, stem, terminals and mounting hardware. All knobs are screw-on type. Stems: 3/8"dia. x 1 1/4"L. 6–36V DC. Rated for 10A at 12V DC.
Part No: M-532-BP
Lightning Master from FORESPAR Home -> Electrical -> Switches, Fuses & Accessories
Constructed entirely of stainless steel with almost 400 fine wires for maximum ion dissipation. Features excellent durability with low weight and low windage. Shaft has two mounting holes at the base.
Part No: 151100
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11