Top Sellers
Electric Bilge Pump Installation Kit from ANCOR MARINE
Essential items for installing a bilge pump Convenient package includes four #8 x 3/4" stainless-steel panhead screws, one 1-3/4" x 3/4" stainless steel hose clamp, and three 16-14AWG heat shrink butt connectors.
|
Shrinkwrap Tape, 4" x 180', Blue from DR. SHRINK
Heat Shrinkwrap Tape Heat Shrink Tapes are designed for repairing holes in the shrinkwrap, for taping pleats and also for attaching zipper access doors. Heat shrink tape is not designed to be stuck to the hull or other parts of the boats as it will leave an adhesive residue.
|
Shrink Tape, 2" x 180', Blue from DR. SHRINK
Heat Shrinkwrap Tape Heat Shrink Tapes are designed for repairing holes in the shrinkwrap, for taping pleats and also for attaching zipper access doors. Heat shrink tape is not designed to be stuck to the hull or other parts of the boats as it will leave an adhesive residue.
|
Twisted Pair Wire with Shield from ANCOR MARINE
Similar to Ancor duplex wire, except that the conductors are twisted and surrounded by a copper shield for extra protection against noise and electrical interference. Red/black conductors. Recommended by ABYC for DC wiring near compasses and other magnetically - sensitive devices. Sold per foot. Wire Type: Twisted Pair . Construction: Tinned Copper . Conductors (Color and # of): 1 Red, 1 Black . Color of Exterior Insulation: White . Shielding: Copper Shield . Approvals: UL, ABYC, CSA .
|
Dielectric Silicone Compound from ANCOR MARINE
A silicone "grease" that's great for waterproofing coax connections, butt splices, and other sliding electrical connections. 1/3-oz.
|
30 Amp Circuit Breaker with Black Toggle from ANCOR MARINE
Temperature, false-trip-free, AC/DC breakers For use with either AC or DC current. Magnetic circuit breakers are temperature-stable. A false-trip free mechanism prevents breaker from being held with contacts closed during overload. Switch Type: Toggle . Voltage Compatibility: AC, DC . Safety Features: Temperature stable, false-trip free. Housing Material: Plastic Housing . Dimensions: 2" x 1. 64" x . 75" . Terminal Type: Screw .
|
30 Amp Double-Pole Circuit Breaker from ANCOR MARINE
Used with 110V AC main circuits so that both the hot and neutral conductors are disconnected. Same features as single pole breakers. White toggles. Switch Type: Toggle . Voltage Compatibility: 110V AC . Safety Features: Temperature stable, false-trip free . Housing Material: Plastic . Housing Dimensions: 1. 48"W x 2. 00"L x 1. 84"D .
|
Tubing-Alu 7/8X20' from WEST MARINE
Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has . 049" wall thickness . Aluminum has . 058" wall thickness . Use 7/8" tubing for smaller powerboats . Use 1" tubing for sailboats and larger powerboats . Available in 6', 12' and 20' lengths .
|
Marine Silicone Sealant, Clear, 10oz. Tube from WEST MARINE
Use wherever a flexible, removable seal is required A specially-formulated marine silicone that won’t sag, shrink or turn yellow. Can be used above and below the waterline wherever a flexible, removable seal is required. Excellent for bedding deck fittings and hardware that you may want to remove at some time. Also good for insulating between dissimilar metals to prevent galvanic corrosion. Formulation: One-part silicone sealant . Bonds to non-oily woods, metal, fiberglass, glass, plastics .
|
Lube Tube Adapter for Yamaha, Nissan, Tohatsu, Honda (2-50hp) from WEST MARINE
Marine lower unit drain, flush and fill tool. Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefishier lower units. Quick, easy and clean way to change marine lower unit gear lube. For use with all 8- and 10-oz.
|
Shrink Wrap System Hardware Kit from DR. SHRINK
Protect your boat from rain, snow, UV damage, airborne debris and pests during winter storage During long periods of storage, your uncovered boat is susceptible to damage from a number of sources–rain, snow, blowing dirt and debris, bird droppings, UV radiation and nesting birds and rodents. ”Wrap-It-Up“ is a do-it-yourself shrink-wrap system that provides your boat with the protection it deserves during the long off-season. Buy it once and reuse it year after year. Buy a new kit every year.
|
West Marine/SOSpenders PFD Rearming Kit, 3/8" Threaded Cylinder Neck Dia. from WEST MARINE
West Marine/SOSpenders PFD Rearming Kit Style: Automatic. Cylinder Weight: 38g. Cylinder Neck Diameter: 3/8" or 1/2" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: West Marine/SOSpenders PFD . Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
G4 BI-PIN Base, 24V, 10W, 0.42A, 11CP from ANCOR MARINE
Keep spare bulbs handy in case of burnouts or breakage.
|
|
|
Number 3 - Black, 3" from HARDLINE PRODUCTS SR
Popular vinyl letters to meet USCG requirementsSelf-adhesive, 3"H vinyl, block, letters and numbers. Meet Coast Guard requirements when applied on contrasting background with proper spacing. Black or white. Sold individually or by the kit. Four of each letter and number for a total of 144 pieces in the kit. Meet USCG requirements when affixed to a contrasting background and properly spaced. Self-adhesive vinyl.
|
|
Heat Shrink Tubing, Pk) from ANCOR MARINE, Black (3 Qty, 3, Black, Black (1 Qty
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 306124
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 304103
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 304106
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 306106
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 306603
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 305148
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 303103
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 304603
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 306606
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 304602
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 302148
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 307124
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 301103
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 303124
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 304124
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 306148
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 302106
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 305106
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 302124
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 305124
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 306602
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 305103
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 301124
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 304148
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 304606
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 306103
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 307103
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 301106
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 307148
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 303106
|
|
|
