Top Sellers
Flush Kit For 2- & 4-Stroke Outboards from MERCURY MARINE
Fits Mercury/Mariner 4 and 5hp 2-stroke outboards and 4, 5 and 6hp 4-stroke outboards.
|
Quicksilver Gear Lube Pump from MERCURY MARINE
Fits all models except Mercury Mariner 2. 2, 4 and 5; Mariner 2, 4, 5, 15, 30, 40 (Japanese origin).
|
Oval Deck Pipe from SEAFIT
Accepts line, thimble, shackle and chain to 3/8". Hook under cover holds chain and cover in place. Material: Chromed-plated bronze . Flange: 6. 25" x 4. 5" . I. D. : 4-3/6"L x 2-3/8"W .
|
|
|
Stainless-Steel “S” Hook, 3/16" Wire Dia., 5/8" Inside Width from SEAFIT
Stainless Steel "S" Hooks. Polished Stainless Steel Made in the U. S. A.
|
Striping Tape - Dark Blue, 3/4" from SEAFIT
Premium 2mil. thick vinyl striping tape makes it easy to add a colorful accent to your boat! Made from the same material used in quality custom boat graphics. It will not crack or peel, even in salt water, and the colors last from 5–7 years without fading. It can even be applied below the waterline. It can be bent, waved, and applied around corners. Should you change your mind or decide to update the look of your boat, simply remove the tape–no need to sand or ruin your paint or finish.
|
Starboard Side Green Vertical-Mount Side Navigation Light, 3-5/8”H x 4-1/8”W from PERKO
European style Series 170 side navigational lights are certified for use on powerboats and sailboats up to 20m (or 65. 6') with 12V electrical systems. Red or green lenses with 12V bulbs included. 2nm visibility range. Case Material: Chrome-plated brass tops with black plastic bases . Mounting Hardware: #10 FHMS (sold separately) . Volts: 12V . Draw: 0. 97A . Replacement Bulb: Model 8646853 .
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
Swivel Anchor Connector, 5/16"–7/16" Chain, 2750lb. SWL from WEST MARINE
18-8 stainless swivel connectors prevent snagging at the anchor/chain connection, slide easily over anchor rollers and prevent the chain from becoming twisted while the anchor is set. Attach with a single set screw (using the Allen wrench included).
|
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.
|
|
|
Honda Fuel Line Connector, Moeller 033501-10 from MOELLER
Moeller 033501-10: Male bayonet tank connector, 1/4" NPT, 1991 and newer. Moeller 033496-10: Male bayonet style tank connector with 1/4" NPT, brass. Moeller 033502-10: Bayonet style female tank connector, 3/8" barb, 1991 and newer.
|
SmartPilot X-5 Wheel Pilot from RAYMARINE INC.
The innovative SmartPilot X-5 Wheel autopilot is equipped with the fully enclosed MkII wheel-drive for simple installation and below deck autopilot performance. The control unit and patented fluxgate compass are mounted separately for easy access and optimum performance. Select the corepack (without a control head, but including the course computer, fluxgate compass and drive unit) if you already have a control head and only need the rest of the autopilot system.
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Teak Plugs - 3/8" from SEAFIT
Use these teak plugs to cover screw heads or fill small holes for a beautiful smooth finish to your installation. Sizes: 1/4" 5/8" 5/16" 3/8" 1/2" 1".
|
|
Connector from SHAKESPEARE ELECTRON, 5" from ICOM, 4" from SEAFIT
|
|
Home -> Electronics -> Antennas, Mounts, Cable -> Coax & Connectors->CableClam Waterproof Through-Deck Fittings
CableClams provide a leak-free way to run antenna and electrical cables through a surface, yet allow the cable and connector to be removed at a later time. Using your own drill to create the precise hole diameter required greatly improves waterproofness over pre-drilled models. A tapered center seal grips wire securely when the fasteners are tightened.
Part No: 1003
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable -> Coax & Connectors->PL-259 Connector for RG-8/AU & RG-213 Coax Cable
Connectors are gold-plated brass to better withstand the elements and to minimize connector-borne signal loss.
Part No: PL-259-58-G
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable -> Coax & Connectors->SeaTalk Adapter Cable
Adapter Cable SeaTalk 1 To SeaTalk NG.
Part No: A06047
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable -> Coax & Connectors->SeaTalkhs Dual End Weatherproof Network Cable
5 Meter SeaTalkhs dual end weatherproof network cable.
Part No: A62246
|
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable -> Coax & Connectors->SeaTalkhs Dual End Weatherproof Network Cable
5 Meter SeaTalkhs dual end weatherproof network cable.
Part No: A62245
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable -> Coax & Connectors->Thrudeck Coax Connector
Please note, Cap and Deck Feed-Through are sold separately.
Part No: 200252
|
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable -> Coax & Connectors->Thrudeck Coax Connector
Please note, Cap and Deck Feed-Through are sold separately.
Part No: 200250
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable -> VHF Antennas->Replacment Antenna
Soft flexible replacement antenna.
Part No: FA-SC55V
|
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable -> VHF Antennas->Replacment Antenna
Soft flexible replacement antenna.
Part No: FA-SC58V
|
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable -> VHF Antennas->Replacment Antenna
Soft flexible replacement antenna.
Part No: FA-S64V
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->37STV Satellite Antenna
Perfect antenna for small fishing, cruising and sailing boats With its compact 14” antenna, the 37STV is the perfect for small fishing, cruising and sailing boats in the 25 to 40 feet range. It’s fully stabilized to counter the motion of the boat while underway and a unique rotating sub-reflector the minimizes the need for constant dish movement so it remains quiet and stable. Multi-satellite support for DirecTV, Dish Network and Express Vu.
Part No: E93017
|
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->37STV Satellite Antenna
Perfect antenna for small fishing, cruising and sailing boats With its compact 14” antenna, the 37STV is the perfect for small fishing, cruising and sailing boats in the 25 to 40 feet range. It’s fully stabilized to counter the motion of the boat while underway and a unique rotating sub-reflector the minimizes the need for constant dish movement so it remains quiet and stable. Multi-satellite support for DirecTV, Dish Network and Express Vu.
Part No: E96016
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Adapters
Quality adapters for use with Digital Antenna’s PowerMax™ product line and marine antennas.
Part No: DA572
|
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Adapters
Quality adapters for use with Digital Antenna’s PowerMax™ product line and marine antennas.
Part No: DA645G
|
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Adapters
Quality adapters for use with Digital Antenna’s PowerMax™ product line and marine antennas.
Part No: DA947
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Antenna Extension - 1FT Wht Polycarbonate
Raise the antenna height above interference for greater rangeLight-duty fiberglass extensions raise antennas above potential interference from backstays or pulpits. Mounts between your antenna base and your VHF antenna or loran coupler. 1" male and female threads on ends. We recommend the use of an upper support bracket when used with VHF antennas or on fast powerboats.
Part No: 4364-B
|
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Antenna Extension - 1FT Wht Polycarbonate
Raise the antenna height above interference for greater rangeLight-duty fiberglass extensions raise antennas above potential interference from backstays or pulpits. Mounts between your antenna base and your VHF antenna or loran coupler. 1" male and female threads on ends. We recommend the use of an upper support bracket when used with VHF antennas or on fast powerboats.
Part No: 498
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Antenna Mounts
Premium quality stainless steel antenna mounts easily accept Digital Antenna’s high performance antennas with 1"–14 threads.
Part No: F114
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Centerpin® Solderless Connectors and Standard Gold-Plated Connectors/Adapters
Centerpin® solderless gold-plated connectors A novice can install the new Centerpin® Coaxial Connector flawlessly, in a matter of seconds with a standard pair of needle-nose pliers. . Eliminating the steps of measuring, stripping and soldering that often lead to installer error has been eliminated. . 24kt gold corrosion protection. . Standard Gold-plated connectors and adapters Gold plated fittings exhibit superior conductivity and are less vulnerable to corrosion in the marine environment.
Part No: FS-8101-G
|
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Centerpin® Solderless Connectors and Standard Gold-Plated Connectors/Adapters
Centerpin® solderless gold-plated connectors A novice can install the new Centerpin® Coaxial Connector flawlessly, in a matter of seconds with a standard pair of needle-nose pliers. . Eliminating the steps of measuring, stripping and soldering that often lead to installer error has been eliminated. . 24kt gold corrosion protection. . Standard Gold-plated connectors and adapters Gold plated fittings exhibit superior conductivity and are less vulnerable to corrosion in the marine environment.
Part No: PL-259-CP-G
|
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Centerpin® Solderless Connectors and Standard Gold-Plated Connectors/Adapters
Centerpin® solderless gold-plated connectors A novice can install the new Centerpin® Coaxial Connector flawlessly, in a matter of seconds with a standard pair of needle-nose pliers. . Eliminating the steps of measuring, stripping and soldering that often lead to installer error has been eliminated. . 24kt gold corrosion protection. . Standard Gold-plated connectors and adapters Gold plated fittings exhibit superior conductivity and are less vulnerable to corrosion in the marine environment.
Part No: PL-258-CP-G
|
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Centerpin® Solderless Connectors and Standard Gold-Plated Connectors/Adapters
Centerpin® solderless gold-plated connectors A novice can install the new Centerpin® Coaxial Connector flawlessly, in a matter of seconds with a standard pair of needle-nose pliers. . Eliminating the steps of measuring, stripping and soldering that often lead to installer error has been eliminated. . 24kt gold corrosion protection. . Standard Gold-plated connectors and adapters Gold plated fittings exhibit superior conductivity and are less vulnerable to corrosion in the marine environment.
Part No: RA-259-239-G
|
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Centerpin® Solderless Connectors and Standard Gold-Plated Connectors/Adapters
Centerpin® solderless gold-plated connectors A novice can install the new Centerpin® Coaxial Connector flawlessly, in a matter of seconds with a standard pair of needle-nose pliers. . Eliminating the steps of measuring, stripping and soldering that often lead to installer error has been eliminated. . 24kt gold corrosion protection. . Standard Gold-plated connectors and adapters Gold plated fittings exhibit superior conductivity and are less vulnerable to corrosion in the marine environment.
Part No: F-SPLC-CP/GH-01
|
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Centerpin® Solderless Connectors and Standard Gold-Plated Connectors/Adapters
Centerpin® solderless gold-plated connectors A novice can install the new Centerpin® Coaxial Connector flawlessly, in a matter of seconds with a standard pair of needle-nose pliers. . Eliminating the steps of measuring, stripping and soldering that often lead to installer error has been eliminated. . 24kt gold corrosion protection. . Standard Gold-plated connectors and adapters Gold plated fittings exhibit superior conductivity and are less vulnerable to corrosion in the marine environment.
Part No: BNC-CP/GS01
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Coax Cable Deck Fittings
Chrome-plated brass fittings with rubber sealing glands. Each ShWt .
Part No: 11597
|
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Coax Cable Deck Fittings
Chrome-plated brass fittings with rubber sealing glands. Each ShWt .
Part No: 11593
|
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Coax Cable Deck Fittings
Chrome-plated brass fittings with rubber sealing glands. Each ShWt .
Part No: 11594
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Deck Antenna Dual-Axis Ratchet Mounts with Handle
Standardized footprint for easy replaceabilityThese popular mounts are the standard for marine antennas, but since they have traditionally been made by different companies, they end up with different hole patterns and appearances. We’ve taken the nylon version and duplicated it in Zamak for inland users, and in stainless steel for ocean users. One can easily replace another if needed. Fits all standard 1” marine antennas. Base measures 2 1/2" x 3 9/16".
Part No: 6060A
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Deck Mounts
Low-profile fixed flange antenna mounts are great for GPS antennasDesigned for GPS antennas, these low-profile bases also work well on any antenna using standard 1"-14 threads. 2 3/4" diameter base, 1 1/2" high.
Part No: 4193 NY
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Deck Mounts
Designed for GPS antennas, these low-profile bases also work well on any antenna using standard 1''-14 threads. 2 3/4'' diameter base, 1 1/2'' high. Mount with three 1/4'' bolts.
Part No: 4193SS
|
|
|
