Top Sellers
Swivel Anchor Connector, 5/16"–7/16" Chain, 2750lb. SWL from WEST MARINE
18-8 stainless swivel connectors prevent snagging at the anchor/chain connection, slide easily over anchor rollers and prevent the chain from becoming twisted while the anchor is set. Attach with a single set screw (using the Allen wrench included).
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
Honda Fuel Line Connector, Moeller 033501-10 from MOELLER
Moeller 033501-10: Male bayonet tank connector, 1/4" NPT, 1991 and newer. Moeller 033496-10: Male bayonet style tank connector with 1/4" NPT, brass. Moeller 033502-10: Bayonet style female tank connector, 3/8" barb, 1991 and newer.
|
Electronic Horn, Black from AQUA-SIGNAL
This under-deck hidden horn is designed for vessels under 12 meters, draws less than 1/2 amp and is easily installed in a standard 2 1/4" cutout. Each unit is completely sealed and comes with a waterproof gasket. All openings are sealed to let sound out but prevent water from coming in. Loudness dB: 106-108dB. Design Standards: USCG, CE. Dimensions: 4. 92"L x 3. 11"W x 3. 43"D. Draw: Less than 0. 5A at 12V.
|
Shore Power Cord Storage & Connector Box from SAIL SYSTEMS
Connect and store 30 amp shore power and phone cords in this high-gloss acrylic capped ABS box. Molded supports hold coiled power cord and installed connector. Gasketed "Slimline" door with hidden fasteners for a flush look and weather resistance.
|
|
|
GlobalFix™ iPRO Category II GPS-Enabled EPIRB from ACR ELECTRONICS
The screen shows GPS LAT/LON, operating instructions, usage tips, transmission bursts as well as battery power. Self-testing your beacon is simple and easy to understand, with the iPRO digital display visually guiding you through the self test step by step. The GlobalFix iPRO is also the first EPIRB that offers Dual GPS Technology. Interface your iPRO to your onboard GPS to ensure that your LAT/LON is stored inside so your precise coordinates are transmitted in the first data burst.
|
C-Strobe Personal Strobe Light from ACR ELECTRONICS
This waterproof, corrosion-resistant PFD light delivers more than eight hours of intense one-second interval flashes on two AA alkaline or 1. 5V lithium batteries (not included). Waterproof (to 10'), corrosion- impact- and temperature- resistant ABS case Twist "ON-OFF" control can be operated by gloved hands and in adverse conditions Slim, lightweight design. Comes with an adjustabe Velcro® strap and wrist loop Meets USCG (161. Flash rate: 60 ± 10 flashes per minute nominal.
|
|
|
DVD-Garmin GPS MAP 3006 from BENNETT MARINE
DVD-GARMIN GPS MAP 3006|DVD-GARMIN GPS MAP 3006.
|
Super Sub Pump 500, 500gph from WHALE PUMPS
With a low-profile design and horizontal or vertical discharge positions, these versatile pumps are a great choice for narrow/low clearance bilges where others just won’t fit. Twist-lock assembly/ disassembly makes these pumps easy to clean. Following on the heels of the original award-winning design of the Super Sub 500, the new Super Sub 650 features a built-in electronic switch and increased capacity of 650gph. Port Size: 3/4" . Built-in Switch: Super Sub 500: No; Super Sub 650: Yes .
|
|
|
Boat Hook Tip from WEST MARINE
Designed to fit the handles of our Admiral- and Captain-Series Deck Brushes. All have positive-locking, pushbutton, quick-connector sockets that prevent accessories from rotating when in use.
|
Explorer ReliefBand® from ABBOTT LABS
Drug-free, electronic motion sickness relief! The only electronic drug-free, FDA cleared remedy for motion sickness, this medical device utilizes gentle user-controlled electrical stimulation to send messages to your brain that block the signals that cause nausea. Usage is easy—just strap it on the underside of your wrist and adjust to the setting that is most comfortable. No drowsiness or drug like side effects! Features include simple ON/OFF push-button control and five stimulation levels.
|
Auxiliary Steering Kits for Trolling Motors - Zinc Rod from MARINETECH PRODUCTS
Steer your trolling motor with your boat's main steering wheel. These connector rods attach the trolling motor directly to the main engine—when the big one moves, the little one moves along with it. Kits come complete with two quick disconnect ball joint assemblies which make taking it off when you don't need it easy. Connect rod length is 24", cut it to size for a perfect fit. Use the drive bracket for motors that have SeaStar or Teleflex steering.
|
|
Connector from SHAKESPEARE ELECTRON
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Antenna Mounts
Premium quality stainless steel antenna mounts easily accept Digital Antenna’s high performance antennas with 1"–14 threads.
Part No: F114
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Antenna Mounts
Premium quality stainless steel antenna mounts easily accept Digital Antenna’s high performance antennas with 1"–14 threads.
Part No: DM191
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Bulk Coax Cable
Tinned copper center conductor and outer braid for low signal lossClear communications require superior antenna/radio connections. Tinned copper wire is used for the conductor and shield and is insulated by a white PVC jacket with UL markings. As a rule of thumb, use the largest coax possible to reduce signal loss between the antenna and the radio which can rob you of both transmit and receiving power. The chart shows the effect on signal loss of different sizes of coax. Price is per foot.
Part No: 151550
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Bulk Coax Cable
Tinned copper center conductor and outer braid for low signal lossClear communications require superior antenna/radio connections. Tinned copper wire is used for the conductor and shield and is insulated by a white PVC jacket with UL markings. As a rule of thumb, use the largest coax possible to reduce signal loss between the antenna and the radio which can rob you of both transmit and receiving power. The chart shows the effect on signal loss of different sizes of coax. Price is per foot.
Part No: 151025
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Bulk Coax Cable
Tinned copper center conductor and outer braid for low signal lossClear communications require superior antenna/radio connections. Tinned copper wire is used for the conductor and shield and is insulated by a white PVC jacket with UL markings. As a rule of thumb, use the largest coax possible to reduce signal loss between the antenna and the radio which can rob you of both transmit and receiving power. The chart shows the effect on signal loss of different sizes of coax. Price is per foot.
Part No: 151725
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Bulk Coax Cable
Tinned copper center conductor and outer braid for low signal lossClear communications require superior antenna/radio connections. Tinned copper wire is used for the conductor and shield and is insulated by a white PVC jacket with UL markings. As a rule of thumb, use the largest coax possible to reduce signal loss between the antenna and the radio which can rob you of both transmit and receiving power. The chart shows the effect on signal loss of different sizes of coax. Price is per foot.
Part No: 150525
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->CableClam Waterproof Through-Deck Fittings
CableClams provide a leak-free way to run antenna and electrical cables through a surface, yet allow the cable and connector to be removed at a later time. Using your own drill to create the precise hole diameter required greatly improves waterproofness over pre-drilled models. A tapered center seal grips wire securely when the fasteners are tightened.
Part No: 1001
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->CableClam Waterproof Through-Deck Fittings
CableClams provide a leak-free way to run antenna and electrical cables through a surface, yet allow the cable and connector to be removed at a later time. Using your own drill to create the precise hole diameter required greatly improves waterproofness over pre-drilled models. A tapered center seal grips wire securely when the fasteners are tightened.
Part No: 1002
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->CableClam Waterproof Through-Deck Fittings
CableClams provide a leak-free way to run antenna and electrical cables through a surface, yet allow the cable and connector to be removed at a later time. Using your own drill to create the precise hole diameter required greatly improves waterproofness over pre-drilled models. A tapered center seal grips wire securely when the fasteners are tightened.
Part No: 1003
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Centerpin® Solderless Connectors and Standard Gold-Plated Connectors/Adapters
Centerpin® solderless gold-plated connectors A novice can install the new Centerpin® Coaxial Connector flawlessly, in a matter of seconds with a standard pair of needle-nose pliers. . Eliminating the steps of measuring, stripping and soldering that often lead to installer error has been eliminated. . 24kt gold corrosion protection. . Standard Gold-plated connectors and adapters Gold plated fittings exhibit superior conductivity and are less vulnerable to corrosion in the marine environment.
Part No: FS-8101-G
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Centerpin® Solderless Connectors and Standard Gold-Plated Connectors/Adapters
Centerpin® solderless gold-plated connectors A novice can install the new Centerpin® Coaxial Connector flawlessly, in a matter of seconds with a standard pair of needle-nose pliers. . Eliminating the steps of measuring, stripping and soldering that often lead to installer error has been eliminated. . 24kt gold corrosion protection. . Standard Gold-plated connectors and adapters Gold plated fittings exhibit superior conductivity and are less vulnerable to corrosion in the marine environment.
Part No: PL-259-CP-G
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Centerpin® Solderless Connectors and Standard Gold-Plated Connectors/Adapters
Centerpin® solderless gold-plated connectors A novice can install the new Centerpin® Coaxial Connector flawlessly, in a matter of seconds with a standard pair of needle-nose pliers. . Eliminating the steps of measuring, stripping and soldering that often lead to installer error has been eliminated. . 24kt gold corrosion protection. . Standard Gold-plated connectors and adapters Gold plated fittings exhibit superior conductivity and are less vulnerable to corrosion in the marine environment.
Part No: PL-258-CP-G
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Centerpin® Solderless Connectors and Standard Gold-Plated Connectors/Adapters
Centerpin® solderless gold-plated connectors A novice can install the new Centerpin® Coaxial Connector flawlessly, in a matter of seconds with a standard pair of needle-nose pliers. . Eliminating the steps of measuring, stripping and soldering that often lead to installer error has been eliminated. . 24kt gold corrosion protection. . Standard Gold-plated connectors and adapters Gold plated fittings exhibit superior conductivity and are less vulnerable to corrosion in the marine environment.
Part No: RA-259-239-G
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Centerpin® Solderless Connectors and Standard Gold-Plated Connectors/Adapters
Centerpin® solderless gold-plated connectors A novice can install the new Centerpin® Coaxial Connector flawlessly, in a matter of seconds with a standard pair of needle-nose pliers. . Eliminating the steps of measuring, stripping and soldering that often lead to installer error has been eliminated. . 24kt gold corrosion protection. . Standard Gold-plated connectors and adapters Gold plated fittings exhibit superior conductivity and are less vulnerable to corrosion in the marine environment.
Part No: F-SPLC-CP/GH-01
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Centerpin® Solderless Connectors and Standard Gold-Plated Connectors/Adapters
Centerpin® solderless gold-plated connectors A novice can install the new Centerpin® Coaxial Connector flawlessly, in a matter of seconds with a standard pair of needle-nose pliers. . Eliminating the steps of measuring, stripping and soldering that often lead to installer error has been eliminated. . 24kt gold corrosion protection. . Standard Gold-plated connectors and adapters Gold plated fittings exhibit superior conductivity and are less vulnerable to corrosion in the marine environment.
Part No: BNC-CP/GS01
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Coax Cable Deck Fittings
Chrome-plated brass fittings with rubber sealing glands. Each ShWt .
Part No: 11597
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Coax Cable Deck Fittings
Chrome-plated brass fittings with rubber sealing glands. Each ShWt .
Part No: 11593
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Coax Cable Deck Fittings
Chrome-plated brass fittings with rubber sealing glands. Each ShWt .
Part No: 11594
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Deck Antenna Dual-Axis Ratchet Mounts with Handle
Standardized footprint for easy replaceabilityThese popular mounts are the standard for marine antennas, but since they have traditionally been made by different companies, they end up with different hole patterns and appearances. We’ve taken the nylon version and duplicated it in Zamak for inland users, and in stainless steel for ocean users. One can easily replace another if needed. Fits all standard 1” marine antennas. Base measures 2 1/2" x 3 9/16".
Part No: 113C
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Deck Antenna Dual-Axis Ratchet Mounts with Handle
Standardized footprint for easy replaceabilityThese popular mounts are the standard for marine antennas, but since they have traditionally been made by different companies, they end up with different hole patterns and appearances. We’ve taken the nylon version and duplicated it in Zamak for inland users, and in stainless steel for ocean users. One can easily replace another if needed. Fits all standard 1” marine antennas. Base measures 2 1/2" x 3 9/16".
Part No: 81002A
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Deck Antenna Dual-Axis Ratchet Mounts with Handle
Standardized footprint for easy replaceabilityThese popular mounts are the standard for marine antennas, but since they have traditionally been made by different companies, they end up with different hole patterns and appearances. We’ve taken the nylon version and duplicated it in Zamak for inland users, and in stainless steel for ocean users. One can easily replace another if needed. Fits all standard 1” marine antennas. Base measures 2 1/2" x 3 9/16".
Part No: 6060A
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Deck Mounts
Low-profile fixed flange antenna mounts are great for GPS antennasDesigned for GPS antennas, these low-profile bases also work well on any antenna using standard 1"-14 threads. 2 3/4" diameter base, 1 1/2" high.
Part No: 4193 NY
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Deck Mounts
Low-profile fixed flange antenna mounts are great for GPS antennasDesigned for GPS antennas, these low-profile bases also work well on any antenna using standard 1"-14 threads. 2 3/4" diameter base, 1 1/2" high.
Part No: 4193SS
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Destackers
Destackers for use with KVH DIRECTV HDTV.
Part No: 19-0410
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Destackers
Destackers for use with KVH DIRECTV HDTV.
Part No: 19-0347
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Nylon Rail Mounts
Low-profile steel cinch band clamps these mounts to 7/8" and 1" round rails. Ratchet-tooth design keeps the antenna pointed at the angle of your choice. The no-lever model adjusts with a 5/16" Allen wrench.
Part No: 81006A
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Nylon Rail Mounts
Low-profile steel cinch band clamps these mounts to 7/8" and 1" round rails. Ratchet-tooth design keeps the antenna pointed at the angle of your choice. The no-lever model adjusts with a 5/16" Allen wrench.
Part No: 81006B
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->PL-259 Connector for RG-8/AU & RG-213 Coax Cable
Connectors are gold-plated brass to better withstand the elements and to minimize connector-borne signal loss.
Part No: PL-258-G
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->PL-259 Connector for RG-8/AU & RG-213 Coax Cable
Connectors are gold-plated brass to better withstand the elements and to minimize connector-borne signal loss.
Part No: PL-259-8X-G
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->PL-259 Connector for RG-8/AU & RG-213 Coax Cable
Connectors are gold-plated brass to better withstand the elements and to minimize connector-borne signal loss.
Part No: PL-259-G
|
|
|