Top Sellers
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
|
Black Streak DfE Cleaner, Qt. from THETFORD
We want to stress that Thetford Marine Care Green Products are competitively priced, truly green and perform as well of better than conventional products! The product line is the first Marine Care line that is truly GREEN. UltraFoam clings to surfaces and resists dripping or running off the deck or the hull allowing more complete cleaning in addition to conservation of the product and the environment. Safe for most surfaces including gel coated surfaces. Carries DfE approval Available in 32oz.
|
T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
T-Top Boat Cover, Center-Line Length 19'5" to 20'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
"Little" Crane, 175 lb. Capacity, 30" Arm Reach, 7:1 Purchase, 75' Line Length from ST. CROIX MARINE
Precision engineered and fabricated from stainless steel, these removable cranes lift heavy loads with ease. Best of all, it takes just 20 seconds to set up or remove for storage. Optional spare mounting kits (VPN #176 & 196) include a set of brackets and rail clamps for an extra mounting location. Material: Polished stainless steel. Height: 60" mast height. Mounting Style: Horizontal or vertical mounting to railing. Included Equipment: Complete kit with mounts and 5/16" line.
|
Halyard Kit, 1/8" Wire Dia., 3/8" Line Dia., 40' Wire Length, 40' Line Length from WEST MARINE RIGGING
Convenient, do-it-yourself kits offer an economical way to replace old halyards We offer these kits for those who want to replace their old halyards or install new low-stretch halyards. Made of the highest quality 7x19 oil-free stainless wire and New England Ropes premium white Sta-Set yacht braid. Comes with a Flemish eye at the rope end, and a thimble and sleeve, but no shackle. Rope Type: Sta-Set Yacht Braid . Shackle: Flemish eye splice, sleeve and thimble, no shackle .
|
Black 3-Strand Nylon, 7/16'' Diameter, 5300lb. Breaking Strength from NEW ENGLAND ROPES
Dramatic resistance to damaging internal and external abrasion Combining premium nylon fiber with a high-quality marine coating and New England Ropes superior manufacturing processes produces line that is five times more abrasion-resistant wet than any other nylon line. You can actually feel this critical performance advantage when you handle the supple line. Stretch: 16% at 15% of breaking strength. *Approximately 10–15% less strength than White Premium Three-Strand Nylon.
|
Large Anchor & Rode Bag from WEST MARINE
Anchor Bag Durable mesh bag provides a convenient and tangle-free place to store your anchor rode. A number of features add to the life of your rode and make it easier to deploy. The wide mouth is held open with an internal stainless steel ring, but closes easily with a drawstring. . Mesh ends dry quickly and a reinforced slit in the bottom allows the bitter end to be passed outside the bag for securing. Brass boat snap allows you to hang the bag and rode where they’re most convenient.
|
Stretch 'N' Slide Dock Line from GREENFIELD PRODUCTS
The easiest docking you've ever done! The 4' Stretch 'N Slide dock line stretches to 8' long and has 7 individual loops, so you'll always have the perfect length for easy tie up. Secures your boat to the dock in seconds.
|
Ultra Blue Three-Strand Line, 1/4" Dia., 1,700lb. Breaking Strength from SAMSON ROPE
Ultra-strong line outlasts polypro two to one Made from bi-polymer olefin fiber, ultra-strong Ultra Blue is 30%–35% stronger than polypropylene and has more than twice the wear life. UV light resistance is excellent, it is easy to grip and it floats.
|
3mm Finish Line, 75' Spool, 650lb. Breaking Strength, Red from NEW ENGLAND ROPES
A great line for dinghy outhauls, vang systems, cunninghams, hiking strap lines, centerboard lines, topping lifts and halyardsSuper-strong prestretch doublebraid is made from a high-tenacity tension-set polyester with an 8-strand "nubby" cover and a continuous filament parallel core. Excellent for all-purpose control lines on dinghies and small catamarans. It's the highest-strength small diameter line at an affordable price. Construction: Double braid with parallel core. Stretch: 1.
|
Full-Flow In-Line Ball Valve, 1" NPT from GROCO
These in-line ball valves permit unrestricted flow in all sizes. Each features a compact bronze body, chrome-plated brass ball with Teflon seats for long life, 304 stainless steel handle, bonding attachment screw and a drain plug.
|
Ocean 3000 Dyneema Single Braid Line, Gray, 4mm, 3,840lb. Breaking Strength from RONSTAN U.S. INC.
A 12-strand single-braid line made of pure Dyneema for high strength with low weight. Perfect for tackles, loops, halyards and runners. Treated with the S. Y. I. S. impregnation system to improve resistance to UV and abrasion. 12-plait Dyneema® SK 75 line, treated with S. Y. I. S.
|
Dock Buddy Dock Line, 4ft., Black from GREENFIELD PRODUCTS
The dock line that stretches Hook one end of the Dock Buddy to your boat cleat . Stretch the other end to dock cleat .
|
Removable Chafe Gear Wrap, 4', for 3/4"– 7/8" Line from MEGAFEND
Protect your docklines from chafe and extend their life with attractive ballistic nylon sleeves featuring easy Velcro™ installation/removal. Ends include 1/8"dia. nylon cords that attach to line to prevent slip. Finished edges create an aesthetically pleasing, uniform look.
|
|
Center-Line Length 23'5" to 24'4", Center-Line Length 21'5" to 22'4"
|
|
Because they produce only a small amount of heat, these highflux bulbs make ideal replacements for most “third degree burn” halogen reading, map and cockpit lights with bi-pin and bayonetstyle bases. Light is soothing and warm with cutting edge internal circuitry and high-quality U. Power consumption is just 1W (less than 0. 08A!) except for three-watt Model 9980111. For forward pointing reading fixtures only. Application: Works with most MR11 fixtures . Amps: 0. 08A (Model 9980111 draws 0.
Part No: 8001399
|
|
|
|
Standard replacement light bulb used in many navigation lights.
Part No: 0337014DP
|
|
|
|
Wedge base replacement bulb for Ancor lamps. System Volts 12. 00 Design Volts 13. 00 Design Amps . 69 Design Volts 9. 00 CP 6.
Part No: 99M 520906
|
|
|
|
Converts your Magma Grill to use the vessel's on-board low pressure Propane/Butane gas supply. Low Pressure.
Part No: A10-220CE
|
|
|
|
Replaces control panel for Jabsco Series 135 Searchlight.
Part No: 60030-0000
|
|
|
|
These innovative access hatches and deck plates provide an attractive, economical way to access horizontal and vertical storage area. Because the lid overlaps the frame, all models are completely waterproof. Fasteners are concealed for a clean installation. Two separate seals on frame and lid ensure that water won't get in. The corrosion-free, integrated hinges allow 180 degree opening. Mfr. 's one year limited warranty.
Part No: HAT-1330-7
|
|
|
|
Hook Length: 2" or 3". Chrome Plated Zinc Alloy.
Part No: 1287DP3CHR
|
|
|
|
SB 5MAN INFL CVR|SB 5MAN INFL CVR.
Part No: 70118
|
|
|
|
RU 3MAN INFL CVR|RU 3MAN INFL CVR.
Part No: 70115
|
|
|
|
SB 4MAN INFL CVR|SB 4MAN INFL CVR.
Part No: 70116
|
|
|
|
4 COMP RiB INFL CVR|4 COMP RiB INFL CVR.
Part No: 70159
|
|
|
|
Cockpit Table Leaves Storage Bag.
Part No: 89400291
|
|
|
|
**VH RUN I/O 24 5-25 4X102|**VH RUN I/O 24 5-25 4X102.
Part No: 71727OB
|
|
|
|
Closed-cell foam encased in a soft fabric cover protects your boat against contact damage. Unlike traditional vinyl or rubber, it won't squeak or mar, and the high-density foam will never leak or become flat. Polyester cover is UV-, mildew-, dirt- and abrasion- resistant. Cleans easily. Large, flexible mounting tabs conceal upper fasteners. Flexible enough to mount on curves or around corners.
Part No: DB6.CU25
|
|
|
|
Protect your eyes from glare and UV damageSleek and lightweight polarized sunglasses offer 100% protection from damaging UV rays. Glare free lenses are made of virtually indestructible polycarbonate. Optically correct Typhoon lenses are offered in tow colors. Horizon Gray lenses are a good choice for bright sunny days or large bodies of water. They filter out hazardous reflected glare and soften intense light. They filter out hazardous glare and increase visual definition in low light.
Part No: 919TBK
|
|
|
|
Easily installs without mortising. Pin Height: 3-3/8" by 7/8" closed width. Each hinge requires four #8 fasteners. Sold in pairs. Stainless steel or chrome plated stamped brass 0957DP0STS: Stainless steel. 0957DP0CHR: Chrome plated stamped brass.
Part No: 0957DP0STS
|
|
|
|
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
Part No: 74306ON
|
|
|
|
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
Part No: 74304OB
|
|
|
|
Keep your outboard looking good and protect it against the tough marine environment. Our motor hoods have been redesigned to better fit newer cowl sizes and later model engines.
Part No: 926117ON
|
|
|
|
Keep your outboard looking good and protect it against the tough marine environment. Our motor hoods have been redesigned to better fit newer cowl sizes and later model engines.
Part No: 926115OR
|
|
|
|
Keep your outboard looking good and protect it against the tough marine environment. Our motor hoods have been redesigned to better fit newer cowl sizes and later model engines.
Part No: 926117OG
|
|
|
|
Keep your outboard looking good and protect it against the tough marine environment. Our motor hoods have been redesigned to better fit newer cowl sizes and later model engines.
Part No: 926115ON
|
|
|
|
Large Replacement Patch D-Ring for AL-390 Sportboat, Green.
Part No: SSL260200
|
|
|
|
Silver gray 11-oz. poly/cotton fabric is water repellent and mildew resistant. Covers feature bound edges, draw-rope in hem and they're cut to fit close for trailering.
Part No: 926444OR
|
|
|
|
Silver gray 11-oz. poly/cotton fabric is water repellent and mildew resistant. Covers feature bound edges, draw-rope in hem and they're cut to fit close for trailering.
Part No: 926444OB
|
|
|
|
Silver gray 11-oz. poly/cotton fabric is water repellent and mildew resistant. Covers feature bound edges, draw-rope in hem and they're cut to fit close for trailering.
Part No: 926112OF
|
|
|
|
Silver gray 11-oz. poly/cotton fabric is water repellent and mildew resistant. Covers feature bound edges, draw-rope in hem and they're cut to fit close for trailering.
Part No: 926111OB
|
|
|
|
Silver gray 11-oz. poly/cotton fabric is water repellent and mildew resistant. Covers feature bound edges, draw-rope in hem and they're cut to fit close for trailering.
Part No: 926555OB
|
|
|
|
Silver gray 11-oz. poly/cotton fabric is water repellent and mildew resistant. Covers feature bound edges, draw-rope in hem and they're cut to fit close for trailering.
Part No: 926111ON
|
|
|
|
Silver gray 11-oz. poly/cotton fabric is water repellent and mildew resistant. Covers feature bound edges, draw-rope in hem and they're cut to fit close for trailering.
Part No: 926555ON
|
|
|