Top Sellers
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
Outdrive Gasket Set, 18-260, TR/TRS, 1973-1993 from SIERRA
Gasket and O-ring kits that seal the drive to the transom.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
10 Micron Replacement Filter Element for Mercury 35-807172/35/35-802893Q, Yamaha ABB-FUELF-IL-TR (Short) from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
Aqua View Element Only, Mercury Replacement Element, Replaces Racor S3213 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
|
|
Sierra-Tube-Exhaust from SIERRA
Some larger V-8 engines that create a large amount of back pressure use exhaust tubes rather than bellows. This helps to relieve the excessive pressure and eliminate problems with premature bellows failure. In the past, the exhaust bellows would blow up like a balloon and cause the drive shaft bellows to rub against the yoke and U-joints causing holes in the bellows.
|
|
|
|
|
Prop Nut Kit, Yamaha 40-50HP from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
Prop Nut Kit, Yamaha V4/V6 from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
|
Gasket from SIERRA, Pistonkit from SIERRA, Pistonring from SIERRA
|
|
Home -> Engine Systems -> Engine Parts
**SealKit-Gear Housing|**SealKit-Gear Housing.
Part No: 18-0020
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Gasket-Head|**Gasket-Head.
Part No: 18-3817
|
|
|
|
Home -> Engine Systems -> Engine Parts
**O-Ring|**O-Ring.
Part No: 18-7956
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Gasket-Carb Bowl|**Gasket-Carb Bowl.
Part No: 18-2582
|
|
|
|
Home -> Engine Systems -> Engine Parts
**O-Ring (5)|**O-Ring (5).
Part No: 18-7175-9
|
|
|
|
Home -> Engine Systems -> Engine Parts
**O-Ring (5)|**O-Ring (5).
Part No: 18-7101-9
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Cotter Pin|**Cotter Pin.
Part No: 18-3743
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Piston Kit|**Piston Kit.
Part No: 18-4623
|
|
|
|
Home -> Engine Systems -> Engine Parts
**CarburetorKit|**CarburetorKit.
Part No: 18-7740
|
|
|
|
Home -> Engine Systems -> Engine Parts
**SealKit|**SealKit.
Part No: 18-3888
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Bearing-Needle (200)|**Bearing-Needle (200).
Part No: 18-4037-9
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Tool-Oil Extractor|**Tool-Oil Extractor.
Part No: 18-52104
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Gasket-Cover|**Gasket-Cover.
Part No: 18-0829
|
|
|
|
Home -> Engine Systems -> Engine Parts
**GasketSet-Powerhead|**GasketSet-Powerhead.
Part No: 18-4326
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Tool-SealDriver|**Tool-SealDriver.
Part No: 18-9845
|
|
|
|
Home -> Engine Systems -> Engine Parts
**O-Ring|**O-Ring.
Part No: 18-7180
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Gasket-Oil Pan|**Gasket-Oil Pan.
Part No: 18-0310
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Bolt|**Bolt.
Part No: 18-2607
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Rings-Piston|**Rings-Piston.
Part No: 18-3912
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Rings-Piston|**Rings-Piston.
Part No: 18-4050
|
|
|
|
Home -> Engine Systems -> Engine Parts
**O-Ring|**O-Ring.
Part No: 18-7104
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Key-Shaft|**Key-Shaft.
Part No: 18-2334
|
|
|
|
Home -> Engine Systems -> Engine Parts
**GasketSet-Powerhead|**GasketSet-Powerhead.
Part No: 18-4418
|
|
|
|
Home -> Engine Systems -> Engine Parts
**O-Ring|**O-Ring.
Part No: 18-0175
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Gasket-Cover Plate (2)|**Gasket-Cover Plate (2).
Part No: 18-2880-9
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Plug-Expansion (5)|**Plug-Expansion (5).
Part No: 18-4245-9
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Tool-Puller|**Tool-Puller.
Part No: 18-9840
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Piston Kit|**Piston Kit.
Part No: 18-4057
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Gasket-Head|**Gasket-Head.
Part No: 18-3816
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Relief Gasket (2)|**Relief Gasket (2).
Part No: 18-0851-9
|
|
|