Fuel Filter Only from MERCURY MARINE
1662576 is a kit for gasoline outboard and MerCruiser models, except 1992 MCM 4. 3L Gen II engines equipped with an in-line fuel filter. 1662550 is an individual replacement element. Model 4531430 is located under the cowl on all Mercury/Mariner V6 outboards, up to 1995, and includes black screw-in sensor. Similar 5037320 is under-cowl filter for Mercury/Mariner V6, 1996 and up, with blue screw-in sensor. OMC model replaces OMC# 502905. Fuel Type: Gasoline. Filtering Efficiency: 25 micron .

Fuel Filter Primer Pump Kit from RACOR-PARKER FILTRAT
Prime your fuel line reliably every timeRetrofit this kit to most Racor 1000 or 900 series fuel filters, and you can easily reprime your filter and fuel system. Activate a switch, and fuel is drawn into the pre-screen and pumped through the housing, re-filling the unit. When not in use, the filter pump is bypassed and the fuel/water separator system functions normally. Assembly is only 3. 3" tall .

Drill Pump Kit from JABSCO
The self-priming drill pump chucks into a standard 1/4" drill motor and pumps up to 3 1/2gpm. Kit includes all items needed for draining engine oil through the dipstick tube. Includes 3' of 1/2" hose, probe adapter and 40"L x 1/4"dia.

Little Pal Pump Kit from JABSCO
Handles many liquid draining and transfer jobs, yet is small enough for a tool or tacklebox. Includes 2" hose and draw tube for draining oil through dipstick tube.

Slimline 500Gph Pump Kit from RULE INDUSTRIES
Portable pump goes where the water is and gets rid of it fastThese hand-deployed, submersible pumps are perfect for pumping out hard-to-reach places where water collects. No slouch when it comes to capacity, they are capable of pumping 500gph and generating a 13-foot head. Powered by your boat's 12V system, they work great for diesel or water transfer, deck showers, washdowns, and baitwell tank aeration. Purchased alone, pumps include a 13-foot power cable with battery clips.

Tsunami T800 Cartridge Head, 12V, 36" Wire from ATTWOOD
Interchageable, twist-and-lock cartridges reduce maintenance time and even enable an angler to switch cartridges between an aerator and bilge pump. The rugged glass and mineral-filled polymer construction resists chemicals, fuel and detergents.

Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.

Gas Caddy from TODD ENTERPRISES
Move 28 gallons of Gas in our smooth-rolling caddy Store and transport fuel safely on docks or onboard. Gas Caddy holds 28 gallons of fuel. Includes 10' of UL Approved hose with static wire, molded hose brackets, UL Approved spring loaded nozzle, 3/4" UL Approved ball valve, aluminum non sparking axle, pneumatic tires with nylon bearings, nylon wheel hubs, vented cap and a molded-in baffle for strength & durability. All Caddies bear the UN Marking, “UN3H1W. ” Color-coded red.

CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.

Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.

Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.

For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.

Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.

Thru-Deck Mark V Manual Sanitation Pump from WHALE PUMPS
Reliable, high-capacity pumps for emptying holding tanks, bilges, gray water tanks, etc. Nitrile diaphragms ensure long service life. Offered in Surface-Mount and Universal configurations. Universal design may be surface- or thru-deck mounted—and when mounted thru-deck requires Deck Plate with Ring Kit (Model 182438) to complete installation. 16gpm capacity. Use 1. 5" hose. Type: Manual Diaphragm, bulkhead or thru-deck models . GPM: 14. 75 . Macerates: No .

10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.