Top Sellers
Flo N’ Go Gas Pump from MOELLER
Stop the slosh! Save gas and prevent spills with a precision pump Still filling the fuel tank by pouring from a heavy can into a funnel? Stop the slosh with Moeller's precision Flo'n'Go Pump. Pump gives you more control for clean filling, less spillage, fumes and pollution. NOT available in CARB states due to state restrictions. * Simple, reliable bellows pump. Made of high-density polyethylene plastic. Pumps gas in any direction. NOT available in CARB states due to state restrictions*.
|
Honda Fuel Line Connector, Moeller 033501-10 from MOELLER
Moeller 033501-10: Male bayonet tank connector, 1/4" NPT, 1991 and newer. Moeller 033496-10: Male bayonet style tank connector with 1/4" NPT, brass. Moeller 033502-10: Bayonet style female tank connector, 3/8" barb, 1991 and newer.
|
12 Gallon Topside Fuel Tank from MOELLER
Made from marine grade cross-linked polyethylene for light weight and durability, all tanks are USCG, NMMA and ABYC compliant. Mechanically vented cap floats, and is easy to grip, with ribbed design. Tank includes 90° 1/4"NPT Moeller patented “Poplock” aluminum withdrawal elbow. It swivels 360° without losing its seal. Injection molded 2 1/4" fill neck with gauge and vent. 43"L x 15"W x 6"H.
|
|
Replacement Cap with Gauge from MOELLER
Externally threaded cap fits Moeller tanks 031103, 031106, 031109, 031112, 031212. Scepter cap fits 4158, 4921, 3780 & 3781 tanks. Internal threaded cap fits 31612, 31615, 31515, 31818, 31620 & 31526 tanks.
|
|
|
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
|
3/8" NPT Aluminum hose barb from MOELLER
3/8 NPT X 3/8" Aluminum hose barb with male threads.
|
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
|
|
|
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.
|
Reed Switch Sending Unit, 18-1/2" Tank Depth from MOELLER
Direct OEM replacements for gasoline applications, calibrated for 240-33 ohm gauges. Stainless steel construction, with gasket and screws included.
|
|
|
Fuel Hose, Type B-2 5/16" from MOELLER
We offer 5/16" and 3/8" SCG B-2 alcohol-resistant hose as used in pre-assembled fuel line. Sold by the foot.
|
Aluminum Permanent Fuel Tank Hold Down Kit from MOELLER
Aluminum Permanent Fuel Tank Hold Down KitMoeller part # 035710.
|
|
|
|
from MOELLER, Male from MOELLER, Cast from MOELLER, Plastic from MOELLER
|
|
Home -> Engine Systems -> Fuel Tanks
2" NPT x 2" AM Buttress Adaptor.
Part No: 9996-151
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Specifcally designed for use in Boston Whalers, Carolina Skiff and Key West bench style, center console, pontoon, deck and jon boat designs, this tank provides a positive seal with Moeller-exclusive injection molded 2-1/4" fill neck. The mechanically vented fuel cap is easy to grip and the 90 degree, 1/4 NPT fuel withdrawal elbow rotates 360 degrees, which eliminates fuel hose kinking. Includes an easy-to-read mechanical direct-sight gauge.
Part No: 031515
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Mercury male bayonet style connector with 3/8" hose barb attaches to the fuel hose on the fuel tank side.
Part No: 033421-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
High quality brass hose barb for your fuel tank requirements.
Part No: 033434-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Conversion Capsule from Mechanical to Electrical Dash Mounted Gauge 33 to 240 Ohm’s.
Part No: 035760-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes two flexible 72" straps, two mounting blocks, two eye hooks and four stainless screws.
Part No: 035711-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Bombardier (Johnson/ Evinrude) 5/16" Barb Female Fuel Line Engine Connector.
Part No: 033410-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Light, strong and tested tough, these aluminum tanks are the choice of many boat manufacturers. Built to meet the rigorous standards of the US Coast Guard as well as the NMMA. RDS fuel tanks are built of 5052 aluminum alloy and tested for their ability to retain pressure and withstand motion, impact and fire. Before welding, all aluminum parts are bathed in acid to eliminate any contamination that might weaken a weld or create the potential for leakage.
Part No: 59043
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
High quality straight brass bulkhead fitting.
Part No: 033210-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Barb-Fuel 1/4Npt x 5/16 Fm Thr|Barb-Fuel 1/4Npt x 5/16 Fm Thr.
Part No: 033476-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Nissan / Tohatsu 3/8" Barb Chrome Plated Brass Engine Size To 90HP Female Fuel Line Assembly Tank End Connector.
Part No: 033451-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Chrysler / Force 1/4 NPT Chrome Plated Brass Male Chrysler / Force Tank Connector.
Part No: 033461-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
3/8" I. D. Universal fit end. Replaces OEM No.
Part No: 034390-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Dimensions: 1/8" FNPT x 1/4" FNPT.
Part No: 033429-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Mercury female bayonet style connector with 5/16" hose barb attaches to the fuel hose on the engine side.
Part No: 033475-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
90° Elbow Chrome Plated Brass Thru Hull Vent Accommodates 5/8" I. D.
Part No: 033201-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Suzuki 1/4 NPT Chrome Plated Brass Male Tank Connector.
Part No: 033463-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Bombardier (Johnson/ Evinrude) 3/8" Barb Female Fuel Line Engine Connector.
Part No: 033480-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Keep your fuel lines operating at peak performance to insure your outboard motor running smoothly. Meets U. S.
Part No: 033464-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Light, strong and tested tough, these aluminum tanks are the choice of many boat manufacturers. Built to meet the rigorous standards of the US Coast Guard as well as the NMMA. RDS fuel tanks are built of 5052 aluminum alloy and tested for their ability to retain pressure and withstand motion, impact and fire. Before welding, all aluminum parts are bathed in acid to eliminate any contamination that might weaken a weld or create the potential for leakage.
Part No: 59020
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Built to meet the rigorous standards of the US Coast Guard as well as the NMMA. RDS fuel tanks are built of 5052 aluminum alloy and tested for their ability to retain pressure and withstand motion, impact and fire. Before welding, all aluminum parts are bathed in acid to eliminate any contamination that might weaken a weld or create the potential for leakage. All Tanks-have 1/4" NPT pickup, 1-1/2" fill, and 1/2" vent fittings . Add 3" height for fittings .
Part No: 59027
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Chrome-plated zinc with black plastic splash guard and removable 30 mesh monel wire screen flame arrestor. Fits 5/8'' I. D. hose. Max.
Part No: 0506DP4CHR
|
|
![Scupper Valve Assembly from PERKO]( "Scupper Valve Assembly from PERKO")
|
|
Home -> Engine Systems -> Fuel Tanks
Scupper valve assembly is molded white plastic with soft black flapper valve. Without tru-hull and mounting hardware . For surface mount applicaions .
Part No: 0365DP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Moeller Primer Bulbs feature gasoline and solvent-resistant construction, stainless steel clamps, and dual internal check valves to ensure a more rapid prime while preventing fuel flow back.
Part No: 034690-10
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
5/16" I. D.
Part No: 034395-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Bombardier (Johnson/ Evinrude) 1/4 NPT Brass Male Tank Connector.
Part No: 033400-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Light, strong and tested tough, these aluminum tanks are the choice of many boat manufacturers. Built to meet the rigorous standards of the US Coast Guard as well as the NMMA. RDS fuel tanks are built of 5052 aluminum alloy and tested for their ability to retain pressure and withstand motion, impact and fire. Before welding, all aluminum parts are bathed in acid to eliminate any contamination that might weaken a weld or create the potential for leakage.
Part No: 59166
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
New federal laws are prompting filling station attendants and harbormasters to call the Coast Guard on boat owners who pollute. Yet even conscientious boaters sometimes splash fuel out their vent line. Attwood's vent-line surge protector can help you avoid federal fines of up to $5,000 for small fuel spills. With automatic nozzles it shuts off the fuel flow when your tank is full. With non-automatic nozzles it gurgles when it's time to stop pumping. Fits 5/8'' ventilation hose.
Part No: 1675-6
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Mercury 3/8" Barb Plastic Male Fuel Line Tank Connector Bayonet Style.
Part No: 033483-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Light, strong and tested tough, these aluminum tanks are the choice of many boat manufacturers. Built to meet the rigorous standards of the US Coast Guard as well as the NMMA. RDS fuel tanks are built of 5052 aluminum alloy and tested for their ability to retain pressure and withstand motion, impact and fire. Before welding, all aluminum parts are bathed in acid to eliminate any contamination that might weaken a weld or create the potential for leakage. Add 3" to height for fittings.
Part No: 59178
|
|
|
