|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs
This durable plastic drain tube won't rot, bend or mildew, and is ideal for use in your motorwell, livewell or baitwell. Concentric rings lock in place for a tight, leak-proof seal.
Part No: 020300-10
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs
Thru-Hull Scupper with Recessed Flapper, Molded White Plastic, Soft Black Flapper Valve. Complete with Nut and Mounting Hardware.
Part No: 0333DP
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs
All-nylon drain and plug with a plastic retainer and O-ring.
Part No: DP10-B
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs
Threaded removeable plug. Retention system keeps plug from getting lost. Large 7/8" (27mm) hole for servicing stern drives. Highly polished 316 stainless steel.
Part No: 7557-7
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->CeaCap Conduit Bulkhead Passthru
The right way to pass cables through bulkheads Fits bulkheads as thick as 2" and requires 3/4" cutout, 1-3/8" flange size with 90° bend.
Part No: TH-CC-2-DP
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->CeaCap Conduit Bulkhead Passthru
The right way to pass cables through bulkheads Fits bulkheads as thick as 2" and requires 3/4" cutout, 1-3/8" flange size with 90° bend.
Part No: TH-CC-1-DP
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Drain Plug Storage Caddy
Provides safe storage for transom drain plugs.
Part No: 960018
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Flip Lock Drain Plugs
Standard rubber and brass plug fits 1" transom drains on many production boats.
Part No: Z1887
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Flip Lock Drain Plugs
Standard rubber and brass plug fits 1" transom drains on many production boats.
Part No: 5882BR
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Flip Lock Drain Plugs
Standard rubber and brass plug fits 1" transom drains on many production boats.
Part No: Z10811
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Garboard Drain Plug/Replacements
Cast brass construction Flange diameter is 2" and is drilled and countersunk for #8 screws Neck depth: 3/8".
Part No: 44-673-I
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Garboard Drain Plug/Replacements
Cast brass construction Flange diameter is 2" and is drilled and countersunk for #8 screws Neck depth: 3/8".
Part No: 7553-3
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Garboard Drain Plugs
All styles have a nut-type plug with 1/2" NPT threads for a watertight fit. All are cast bronze for corrosion resistance, with a 2" OD flange predrilled and countersunk for #8 screws. Some styles have a stainless pin for easier plug removal by hand.
Part No: 0737DP1PLB
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Garboard Drain Plugs
All styles have a nut-type plug with 1/2" NPT threads for a watertight fit. All are cast bronze for corrosion resistance, with a 2" OD flange predrilled and countersunk for #8 screws. Some styles have a stainless pin for easier plug removal by hand.
Part No: 0742DP1
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Garboard Drain Plugs
All styles have a nut-type plug with 1/2" NPT threads for a watertight fit. All are cast bronze for corrosion resistance, with a 2" OD flange predrilled and countersunk for #8 screws. Some styles have a stainless pin for easier plug removal by hand.
Part No: 0714DP1PLB
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Garboard Drain Plugs
All styles have a nut-type plug with 1/2" NPT threads for a watertight fit. All are cast bronze for corrosion resistance, with a 2" OD flange predrilled and countersunk for #8 screws. Some styles have a stainless pin for easier plug removal by hand.
Part No: 0742DP2
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Hotshield Wraps
These are the perfect solution to those small heat sensitive jobs in the engine compartment or muffler/manifold area. Each Hotshield Mini roll comes with a 10 foot coil of stainless steel locking wire to hold the tape in place. 1/8 x 2 x 25.
Part No: 20017
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Hotshield Wraps
These are the perfect solution to those small heat sensitive jobs in the engine compartment or muffler/manifold area. Each Hotshield Mini roll comes with a 10 foot coil of stainless steel locking wire to hold the tape in place. 1/8 x 2 x 25.
Part No: 20015
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Kite Accessories
Kite Line I Assembly Ready Rigged Kite Lines come complete with three Tigress release clips on 250ft. Kite Line II Assembly Ready Rigged Kite Lines come complete with two tigress release clips on 250ft. of 80 lb. Kite Line III Assembly Ready Rigged Kite Lines come complete with two Tigress release clips on 250ft. Helium Balloons These Kite Fishing Balloons are ideal for adding that extra lift to kites on those light wind days or used on their own when there is no wind. High quality balloons.
Part No: 88615
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Rubber Drain Plugs
These expanding rubber plugs are great for live-well tanks, buoyancy tanks on day sailors and small thru-hulls. Made from brass and neoprene. Cam-action lever.
Part No: 7535A3
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Rubber Drain Plugs
These expanding rubber plugs are great for live-well tanks, buoyancy tanks on day sailors and small thru-hulls. Made from brass and neoprene. Cam-action lever.
Part No: 7534A3
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Rubber Drain Plugs
These expanding rubber plugs are great for live-well tanks, buoyancy tanks on day sailors and small thru-hulls. Made from brass and neoprene. Cam-action lever.
Part No: 7533A7
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->T-Handle Drain Plugs
Standard rubber and brass plug fits 1" transom drains on many production boats. Also available in stainless steel.
Part No: 5880BR
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->T-Handle Drain Plugs
Standard rubber and brass plug fits 1" transom drains on many production boats. Also available in stainless steel.
Part No: Z10821
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->T-Handle Drain Plugs
Standard rubber and brass plug fits 1" transom drains on many production boats. Also available in stainless steel.
Part No: Z1886
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Transom Drain Tube & Plug, 5 Spare Plugs & 'o' Rings
This nylon drain tube won't rot, bend or mildew, fits flush to your transom, and allows water to drain when your vessel is trailered. A rubber O-ring makes a watertight seal. Can be loosened with a flat-head screwdriver. Fits 1 1/8'' openings. Mounted with rivets or #8 fasteners.
Part No: 020304-10
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Transom Drain Tubes
Corrosion resistant brass.
Part No: 5878BR
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Transom Drain Tubes
Corrosion resistant brass.
Part No: Z10860
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Transom Drain with Plug
This chrome-plated drain uses a nylon plug with a rubber gasket. Mounts in a 1" hole, and uses #10 FH fasteners. Fasteners not included.
Part No: RF738
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Glove Boxes
Easily mounted into any existing dashboard space. Incorporates a locking latch, and comes with spare keys. Door dimensions: 13 3/4''L x 5 1/2''W. Inside dimensions: 11 3/4''L x 4''W x 6 5/8''D.
Part No: 2638-1
|
|