Top Sellers
Deluxe Windshield Washer Kit from AFI
Install your own windshield washer systemFits new or existing AFI Deluxe wiper arm and blade sets, with all the parts to outfit two wiper arms. The kit includes a 3 liter water tank with mounting bracket (8. 5"H x 7"W x 4. 5"D), 12V pump motor and 16' below deck clear tubing, 6' above deck black tubing, clips and sprayer fittings. You supply wiring, an in-line 3A fuse and On-Off momentary switch.
|
Stainless-Steel Compact Electric Horn - Double from AFI
Mini Twin Electric Horn Excellent for use in the marine environment. totally seal sound units have type 304 stainless cover, diaphragm and mounting brackets. Material: 304 stainless cover & horn diaphragm. Loudness dB: 106 dB. Approvals: ABYC for boats up to 20 meters. Dimensions: 3"L x 8"W x 1 3/4"H. Power Requirements: 12V. Draw: 3A @ 12V (max. 6A). Fundamental frequency: 490±20/440±20.
|
12 Volt White Dual Trumpet Mini Air Horn from AFI
White epoxy powder-coated finish over solid brass. Noncorrosive Lexan® diaphragm. 12vDC. . Draws 20 amps max. Includes compressor, air tubing, fittings, and hardware. 5" W x 3-3/4"H x 9-1/2" L.
|
Compact Horn w/ Black Cover 10023 from AFI
Stainless steel diaphragm and mounting bracket . Black polypropylene cover . Dimensions: 4 inches L x 3-3/4 inches W x 2-3/4 inches H . Maximum amp draw: 4 Amps . dB(A) rating: 108 at one meter Fundamental frequency: 350±15 .
|
Drop-In Hidden Horn from AFI
Designed for easy installation, this hidden horn mounts from the outside. Compact in size, but capable of 107db loudness. Comes with both black and white snap-on ASA plastic grilles. A weatherproof fabric liner lets sound through, but keeps water out. Prewired for 12V installation. Material: ABS plastic . Loudness dB: 107dB . Design Standards: Meets ABYC specs for boats up to 12 meters . Dimensions: 2"H x 3-3/8"W x 3-1/4"D . Power Requirements: 12 Volts .
|
|
|
Swim Platform Bracket, 72-84IN from AFI
A simple way to mount your swim platform. 304 stainless steel brackets, 1. 5"W flat bar stock for the underside of the platform and transom.
|
Dock Box or Cooler Chocks from AFI
Using only plantation-grown teak, these fine accessories make life aboard more pleasant.
|
|
|
Walker Bay 10, 9'8" Length, 4'9" Beam, 126lb., 449lb. Capacity (up to 3 people) from WALKER BAY BOATS
Bolt in the seats, break out the oars (or optional sail kit or motor) and you’re ready to cast off. Boats include exclusive Hydro-Curve Oars. Application: Rowing, motoring or sailing . Hull Material: High Impact Polypropylene . Construction: High-pressure injection molded . Hull Shape: Round bottom lapstrake-style . Standard Hardware: Oars, oar locks, seats, stainless bow eye, Wheel in the Keel™ . Available Accessories: Sail kits, RID kits, Bimini boat cover . Warranty: 10 years limited.
|
Hatch Riser Arm for 20" x 20" Hatch from TAYLOR
Replacement arms for Taylor hatches from 1987 to the present. Universal arms can be left or right.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
C-10 Thermostat Controller from KASCO MARINE INC.
Kasco's NEW C-10 Thermostat Controller is designed to save you money on your electric bills The C-10 differs from our existing C-20 Controller, in that, it only uses Air Temperature to operate the De-Icer. Simply use the dial to set a temperature in which you want the De-Icer to turn on and plug the C-10 into a standard 120V outlet.
|
Honda Fuel Line Connector, Moeller 033501-10 from MOELLER
Moeller 033501-10: Male bayonet tank connector, 1/4" NPT, 1991 and newer. Moeller 033496-10: Male bayonet style tank connector with 1/4" NPT, brass. Moeller 033502-10: Bayonet style female tank connector, 3/8" barb, 1991 and newer.
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
|
22" from AFI, S Wiper Arm from AFI, 10" 14" from AFI
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Chrome Trumpet Air Horn
Includes compressor, air tubing, fittings, and hardware Dimensions: 17”L x 3-3/4”W x 3-3/4”H Includes compressor, air tubing, fittings, and hardware Maximum amp draw: 12 Volt: 20 Amps, 24 Volt: 10 Amps.
Part No: 10524
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Electronic Horns
This under-deck hidden horn is designed for vessels under 12 meters, draws less than 1/2 amp and is easily installed in a standard 2 1/4" cutout. Each unit is completely sealed and comes with a waterproof gasket. All openings are sealed to let sound out but prevent water from coming in. Loudness dB: 106-108dB. Design Standards: USCG, CE. Dimensions: 4. 92"L x 3. 11"W x 3. 43"D. Draw: Less than 0. 5A at 12V.
Part No: 84400-7
|
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Electronic Horns
This under-deck hidden horn is designed for vessels under 12 meters, draws less than 1/2 amp and is easily installed in a standard 2 1/4" cutout. Each unit is completely sealed and comes with a waterproof gasket. All openings are sealed to let sound out but prevent water from coming in. Loudness dB: 106-108dB. Design Standards: USCG, CE. Dimensions: 4. 92"L x 3. 11"W x 3. 43"D. Draw: Less than 0. 5A at 12V.
Part No: 84403-7
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Hotshield Wraps
These are the perfect solution to those small heat sensitive jobs in the engine compartment or muffler/manifold area. Each Hotshield Mini roll comes with a 10 foot coil of stainless steel locking wire to hold the tape in place. 1/8 x 2 x 25.
Part No: 20026
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Kite Accessories
Kite Line I Assembly Ready Rigged Kite Lines come complete with three Tigress release clips on 250ft. Kite Line II Assembly Ready Rigged Kite Lines come complete with two tigress release clips on 250ft. of 80 lb. Kite Line III Assembly Ready Rigged Kite Lines come complete with two Tigress release clips on 250ft. Helium Balloons These Kite Fishing Balloons are ideal for adding that extra lift to kites on those light wind days or used on their own when there is no wind. High quality balloons.
Part No: 88613
|
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Kite Accessories
Kite Line I Assembly Ready Rigged Kite Lines come complete with three Tigress release clips on 250ft. Kite Line II Assembly Ready Rigged Kite Lines come complete with two tigress release clips on 250ft. of 80 lb. Kite Line III Assembly Ready Rigged Kite Lines come complete with two Tigress release clips on 250ft. Helium Balloons These Kite Fishing Balloons are ideal for adding that extra lift to kites on those light wind days or used on their own when there is no wind. High quality balloons.
Part No: 88612
|
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Kite Accessories
Kite Line I Assembly Ready Rigged Kite Lines come complete with three Tigress release clips on 250ft. Kite Line II Assembly Ready Rigged Kite Lines come complete with two tigress release clips on 250ft. of 80 lb. Kite Line III Assembly Ready Rigged Kite Lines come complete with two Tigress release clips on 250ft. Helium Balloons These Kite Fishing Balloons are ideal for adding that extra lift to kites on those light wind days or used on their own when there is no wind. High quality balloons.
Part No: 88614
|
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Kite Accessories
Kite Line I Assembly Ready Rigged Kite Lines come complete with three Tigress release clips on 250ft. Kite Line II Assembly Ready Rigged Kite Lines come complete with two tigress release clips on 250ft. of 80 lb. Kite Line III Assembly Ready Rigged Kite Lines come complete with two Tigress release clips on 250ft. Helium Balloons These Kite Fishing Balloons are ideal for adding that extra lift to kites on those light wind days or used on their own when there is no wind. High quality balloons.
Part No: 88616
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Mini "Full Blast" Air Horns
Handsome and durable solid chromed-brass horn delivers a powerful 126 dB blast, yet remains compact in size. Diaphragm is non-corroding Lexan plastic. Supplied complete with 12V or 24V compressor, tubing and fittings. Material: Chrome-plated solid brass . Loudness dB: 126dB . Design Standards: ABYC for boats up to 20 meters . Dimensions: 9-1/2"L x 3-1/2"W x 3-1/2"H . Draw: 20 amps @12V; 10 amps @24V .
Part No: 10107
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Stainless-Steel 12V Horns
Stainless steel horn looks good, sounds good These horns will retain their gleaming good looks for years thanks to their stainless construction. Unlike some other look-alike horns, even the trumpet bells are all stainless—not plastic. The pleasing tone commands attention without being obnoxious. Pre-wired for easy hook-up to your boat’s 12-volt system. Material: Stainless Steel . Single: 4"W x 14"L. Double: 8"W x 16"L. Design Standards: ABYC for boats up to 20 meters .
Part No: 11565
|
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Stainless-Steel 12V Horns
Stainless steel horn looks good, sounds good These horns will retain their gleaming good looks for years thanks to their stainless construction. Unlike some other look-alike horns, even the trumpet bells are all stainless—not plastic. The pleasing tone commands attention without being obnoxious. Pre-wired for easy hook-up to your boat’s 12-volt system. Material: Stainless Steel . Single: 4"W x 14"L. Double: 8"W x 16"L. Design Standards: ABYC for boats up to 20 meters .
Part No: 11566
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Transom Drain Tube & Plug, 5 Spare Plugs & 'o' Rings
This nylon drain tube won't rot, bend or mildew, fits flush to your transom, and allows water to drain when your vessel is trailered. A rubber O-ring makes a watertight seal. Can be loosened with a flat-head screwdriver. Fits 1 1/8'' openings. Mounted with rivets or #8 fasteners.
Part No: 020303-10
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Transom Drain with Plug
This chrome-plated drain uses a nylon plug with a rubber gasket. Mounts in a 1" hole, and uses #10 FH fasteners. Fasteners not included.
Part No: RF737
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 33022S
|
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 33002
|
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 33919
|
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 33006A
|
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 33021S
|
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 33010A
|
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 31022B
|
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 31024B
|
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 33012A
|
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 33007A
|
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 33015
|
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 33005
|
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 34010
|
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 37110
|
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 33004
|
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 31014B
|
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 33082
|
|
|
