Top Sellers
Trailer Hitch Lock - Nickel Plated from MASTER LOCK
Prevent trailer tow-away theft with these premium corrosion-resistant locks. They resist picking and prying and are easy to install and remove. The lock is located on the front for easy accessibility.
|
Coupler Lock, Barbell Receiver Lock and Adjustable Coupler Lock Package from MASTER LOCK
Package includes a Coupler Lock, Barbell Receiver Lock (5/8" and 1/2") and an Adjustable Coupler Latch Lock all keyed alike, in a handy storage case. The Coupler Lock is die cast zinc, universal design and fits most 1 7/8" & 2" couplers. The Receiver Lock is a universal design that fits both 5/8" and 1/2" receivers.
|
Lock and Adjustable Coupler Latch Lock Package from MASTER LOCK
Get maximum protection for your unattended trailer with this Receiver Lock and Adjustable Coupler Latch Lock Package. Both locks are pick resistant and resist rust, corrosion and clogging. Receiver Lock is a bent pin lock that fits 5/8" and 1/2" receivers. It's hardened steel shackle offers a maximum cut resistance.
|
12V DC 2,000lb Trailer Winch from MASTER LOCK
capacity 12V winch with a unique mounting plate that allows you to temporarily or permanently mount it on any flat surface or ball mount. Features a powerful rack and pinion gear design and is a good choice for boats up to 18'. Built-in carry handle. Includes 20' battery cable, toggle remote, back-up hand crank and hook with safety latch. Line speed: 6 fpm. Volts: 12V DC. Lift Capacity: 2,000lb. Boat Length: Up to 18'. Cable/Strap: 30'L steel. Construction: High-impact plastic housing .
|
Adjustable Ball Mount from MASTER LOCK
It allows you to accurately level your tow vehicle and trailer for safer towing, better trailer tracking and much less sway causing your vehicle to handle better. The ball mount can be easily adjusted with a 7/8" wrench or 3/8" square ratchet drive—even while the trailer is loaded on the ball. Ball mount height is automatically retained by a patented spring clip feature or simply record the ball mount height from its height reference marks. Capacity: 5,000lb. tongue weight.
|
LC 12-22 UXP-UTR Pole, Alum. Tubing, RC125, FC125 Recommended Mast Fitting, 148.50"/27lb. Collapsed Length/Weight, 265.25" Max. Working Length, 2.5", 3" Tubing dias. from FORESPAR
Line Control Whisker Poles Forespar manufactures the finest and most complete selection of whisker poles. Built from heavy-gauge anodized aluminum, high-modulus carbon fiber, or combining an aluminum outer tube with a carbon inner pole, with either Line Control or Twist Lock telescoping systems. It is not necessary to go forward to adjust buttons of any kind—simply uncleat the line to extend or retract.
|
LC 10-18 EL-UXP Pole, Alum. Tubing, RF41, RC125 Recommended Mast Fitting, 121.75"/17lb. Collapsed Length/Weight, 218.13" Max. Working Length, 2", 2.5" Tubing dias. from FORESPAR
Line Control Whisker Poles Forespar manufactures the finest and most complete selection of whisker poles. Built from heavy-gauge anodized aluminum, high-modulus carbon fiber, or combining an aluminum outer tube with a carbon inner pole, with either Line Control or Twist Lock telescoping systems. It is not necessary to go forward to adjust buttons of any kind—simply uncleat the line to extend or retract.
|
LC 10-18 EL-UTR Pole, Alum. Tubing, PE-3SC, RC-125, FC-125 Recommended Mast Fitting, 121.75"/17lb. Collapsed Length/Weight, 218.13" Max. Working Length, 2", 2.5" Tubing dias. from FORESPAR
Line Control Whisker Poles Forespar manufactures the finest and most complete selection of whisker poles. Built from heavy-gauge anodized aluminum, high-modulus carbon fiber, or combining an aluminum outer tube with a carbon inner pole, with either Line Control or Twist Lock telescoping systems. It is not necessary to go forward to adjust buttons of any kind—simply uncleat the line to extend or retract.
|
Turning Lock Lift Handle - Chrome from WEST MARINE
Handle lifts and rolls on stainless pin, unlocking hatch or seat. O-ring seal. Base: 2 5/8" x 3 1/8". Overall height: 4 3/8".
|
Propeller Lock - 3/4" x 16 Threads from MCGARD
Protect yourself against expensive propeller theft. Machined from naval brass and hardened stainless steel, this lock features a free-spinning collar that will turn if attacked by gripping tools, without loosening the lock. Replaces the original propeller nut and washer . Mercruiser: Alpha I, Bravo I, TRS . OMC: Cobra and Ding Cobra . Outboards Mercury/Mariner: 70 hp and larger .
|
Smooth Series Seat Pedestal, 18" to 23" Adjustable Height from GARELICK
Garelick Smooth Series pedestals provided a solid base for a variety of seat hardware. 2 7/8'' diameter pedestals, with 9'', 6 hole bases are made of anodized aluminum to help prevent corrosion and weathering.
|
Smooth Series Seat Pedestal, 30" Height from GARELICK
Garelick Smooth Series pedestals provided a solid base for a variety of seat hardware. 2 7/8'' diameter pedestals, with 9'', 6 hole bases are made of anodized aluminum to help prevent corrosion and weathering.
|
Body Width 2", Vertical Clearance 1", Shackle Diameter 5/16" from ABUS LOCK COMPANY
Set your own easy-to-remember combination on these padlocks with four-pin tumblers. You set the combination using the key provided. All brass internal components and a stainless steel shackle for superior corrosion protection. Type: Combination . Combination Type: Reset-able four tumbler . Material: Brass body and internal components, solid stainless shackle .
|
Length; 6'-12', Diameter; 1-1/4", Lexan SL-Whisker Pole from FORESPAR
Small twist lock poles are made of heavy-gauge, clear anodized aluminum tubing. Whisker poles hold the sail away from the boat, exposing more area to the wind and reducing the tendency of the sail to collapse and fill repeatedly. Using a telescoping whisker pole to stabilize your headsail allows it to work with optimum efficiency. Aluminum tubing. Inboard end fittings: Lexan SL. Recommended mast fittings: PE-1.
|
ADJ 7-15-DL Whisker Pole, 83"/9lb. Collapsed Length/Weight, 202" Max. Working Length, 2" Tubing Diameters from FORESPAR
These telescoping whisker poles are heavy-duty two-section and three-section aluminum spars which can be extended to lengths up to 17' and securely locked in position by an internal twist lock device. Poles feature self-latching Ultra Series™ fittings on the inboard and outboard ends. Aluminum tubing. End Fitting Inboard: UPX. End Fitting Outboard: UPX.
|
|
from GARELICK, Brass from MASTER LOCK, Nova Lift™ from FORESPAR
|
|
Engine Systems -> Motor Mounts -> Lift Hoists & Davits
Designed for small, portable boats under 250lbs. with a solid, fixed transom, these extra-wide wheels let you move your boat while avoiding contact with sharp obstacles that could puncture or scrape the bottom. Heavy-duty, spring-loaded locking system holds wheel in three positions. Constructed of lightweight, super strong graphite-filled copolymer and impervious to all outdoor elements.
Part No: WMRetrDolly1001
|
|
|
Engine Systems -> Motor Mounts -> Lift Hoists & Davits
The unit stores in its own 31" (787. Comes with tackle and will lift anything from the dinghy to the cockpit (or vice-versa) up to 100 lbs. Great for the dinghy motor, but also good for scuba tanks, ice, duffel bags, groceries, etc. The Motor Mate uses a Railfast® mounted ring on the rail and a "toe" on the cockpit coaming directly under the rail. Lightweight, portable, compact . Ideal for lifting outboard motors, sea bags, scuba gear . Lifting capacity: 100 lbs.
Part No: 153100
|
|
|
Engine Systems -> Motor Mounts -> Lift Hoists & Davits
Longer reaching arms use strong, lightweight Marelon components The Nova Davit system represents the "State of the Art" for styling and function. Like all Nova products, a very high-standard finish will make the right statement about your boat. The neat folding feature stows the davit system flush with your boat's stern. The maximum safe working load is 300 lbs. Nova Davit conveniently folds inward to maintain boat slip length or remove them completely for stowage or racing.
Part No: 153302
|
|
|
Engine Systems -> Motor Mounts -> Lift Hoists & Davits
7" lead roller assembly.
Part No: 873
|
|
|
Engine Systems -> Motor Mounts -> Lift Hoists & Davits->Nova Lift™
Forespar's Nova Lift products combine elegant styling with superb strength and function. Other brands swing left and right without control. Nova Lift comes with a stainless-steel lower mounting tube that will accommodate 30" height rails. Vessels with rails higher than 30" will require the use of a deck pad (not included) to raise the installation to the proper height. The Nova Lift with Winch is ideal for trawlers and motor yachts where sailboat winches are not available. 220 lbs.
Part No: 153311
|
|
|
|
Engine Systems -> Motor Mounts -> Lift Hoists & Davits->Nova Lift™
Forespar's Nova Lift products combine elegant styling with superb strength and function. Other brands swing left and right without control. Nova Lift comes with a stainless-steel lower mounting tube that will accommodate 30" height rails. Vessels with rails higher than 30" will require the use of a deck pad (not included) to raise the installation to the proper height. The Nova Lift with Winch is ideal for trawlers and motor yachts where sailboat winches are not available. 220 lbs.
Part No: 153312
|
|
|
Engine Systems -> Motor Mounts -> Motor Mounts
Gets your motor clear of the water when not in use to eliminate propeller drag and to protect the lower unit. Marine-grade stainless steel and a 2" thick polyethylene mounting board. Brackets adjust to transoms with plus or minus angles from 7° to 35° in 7° increments.
Part No: 71056:01
|
|
|
Engine Systems -> Motor Mounts -> Motor Mounts
High-quality, cast aluminum plate mounts in the splashwell with your motor's mounting bolts. Distributes the stress and weight of the motor to protect the transom.
Part No: TSP-1-DP
|
|
|
Engine Systems -> Motor Mounts -> Motor Mounts
Cast-aluminum construction wedges allow full contact between the engine bracket and transom, protecting the transom even in rough waters. Fit newer model OMC and Mercury engines, and bolt-on engines with factory-installed tilt and trim.
Part No: TW-2-DP
|
|
|
Engine Systems -> Motor Mounts -> Motor Mounts
Protect transom, cushion engine vibration, and reduce noise. Available in one size only for engines up to 40hp. Made from oil-resistant rubber with tough, flexible engine clamp inserts. Protects transom, dampens engine vibration and reduces noise. For outboards to 15hp.
Part No: 099074-10
|
![Replacement mounting board 9-1/2" x 10-3/4" x 2" from GARELICK](http://images.westmarine.com/thumb/278717.jpg "Replacement mounting board 9-1/2" x 10-3/4" x 2" from GARELICK")
|
|
Engine Systems -> Motor Mounts -> Motor Mounts
Measures 9 1/2'' x 10 3/4'' x 2'' and fits both Lift & Lower and Stationary outboard brackets.
Part No: 99057:01
|
|
|
Engine Systems -> Motor Mounts -> Motor Mounts
Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with nonskid pad, bolted to the UV stable poly backing board always looks shipshape. no more varnishing. Comes complete with hardware to attach to any standard 1'' (2. 5cm) stainless rail. Warning: Be sure the engine is securely tied onto the backing board and the engine mounts are tightened whenever the engine is stored on Edson's Outboard Motor Mount.
Part No: 521-100ST
|
|
|
Engine Systems -> Motor Mounts -> Motor Mounts
Help make your outboard less attractive to thieves, and also keep it from vibrating loose while running. The vinyl-clad steel tube slides over the mounting screws and is secured with a hardened brass padlock. Padlock is recessed inside the tube to protect against cutting.
Part No: 430-DSPT
|
|
|
Engine Systems -> Motor Mounts -> Motor Mounts
This adjustable outboard motor bracket is designed for motors up to 10 hp or 80 lbs. Its heavy-duty, light-weight aluminum is designed for fresh water use on both powerboats and sail boats.
Part No: 55-0022
|
|
|
Engine Systems -> Motor Mounts -> Motor Mounts->4-Stroke Auxiliary Outboard Brackets
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
Part No: 71090:01
|
|
|
|
Engine Systems -> Motor Mounts -> Motor Mounts->4-Stroke Auxiliary Outboard Brackets
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
Part No: 71091:01
|
|
|
Engine Systems -> Motor Mounts -> Motor Mounts->High-Security Outboard Locks
Polished 316 Stainless Steel high security key locks with anti-drill protection secure outboards to your boat. Bolt Lock model’s backing plate installs under engine transom nut and fits up to 1/2" engine bolts. Bar Lock model fits most outboard engines with turnbuckle installations. Noise dampeners reduce rattle.
Part No: 75-8200
|
|
|
|
Engine Systems -> Motor Mounts -> Motor Mounts->High-Security Outboard Locks
Polished 316 Stainless Steel high security key locks with anti-drill protection secure outboards to your boat. Bolt Lock model’s backing plate installs under engine transom nut and fits up to 1/2" engine bolts. Bar Lock model fits most outboard engines with turnbuckle installations. Noise dampeners reduce rattle.
Part No: 75-8100
|
|
|
Engine Systems -> Motor Mounts -> Motor Mounts->Hydra Power-Assisted Outboard Engine Brackets
Designed to accommodate bigger 2 and 4-stroke engines, the heavy duty 1/2" thick structural aluminum extrusion affords effortless operation–it can raise and lower auxiliary engines in less than 20 seconds. Features 12V self-contained marinized hydraulic actuator, aircraft stainless steel hardware and engineered bronze bushings at pivot points, a 2000lb. tensile strength engine safety cable and a triple coat protective finish. Range of Motion Up/Down: 13 1/4" vertical travel .
Part No: 71095:01
|
|
|
|
Engine Systems -> Motor Mounts -> Motor Mounts->Hydra Power-Assisted Outboard Engine Brackets
Designed to accommodate bigger 2 and 4-stroke engines, the heavy duty 1/2" thick structural aluminum extrusion affords effortless operation–it can raise and lower auxiliary engines in less than 20 seconds. Features 12V self-contained marinized hydraulic actuator, aircraft stainless steel hardware and engineered bronze bushings at pivot points, a 2000lb. tensile strength engine safety cable and a triple coat protective finish. Range of Motion Up/Down: 13 1/4" vertical travel .
Part No: 71096:01
|
|
|
Engine Systems -> Motor Mounts -> Motor Mounts->Outboard Locks
Help make your outboard less attractive to thieves, and also keep it from vibrating loose while running. The vinyl-clad steel tube slides over the mounting screws and is secured with a hardened brass padlock. Padlock is recessed inside the tube to protect against cutting. Comes with two keys. *Fits: OMC 6-30hp, Merc/Mariner 8-25hp, Yamaha 9. 9-40hp, Suzuki 8-13hp.
Part No: 74036
|
|
|
|
Engine Systems -> Motor Mounts -> Motor Mounts->Outboard Locks
Help make your outboard less attractive to thieves, and also keep it from vibrating loose while running. The vinyl-clad steel tube slides over the mounting screws and is secured with a hardened brass padlock. Padlock is recessed inside the tube to protect against cutting. Comes with two keys. *Fits: OMC 6-30hp, Merc/Mariner 8-25hp, Yamaha 9. 9-40hp, Suzuki 8-13hp.
Part No: 74038
|
|
|
|
Engine Systems -> Motor Mounts -> Motor Mounts->Outboard Locks
Help make your outboard less attractive to thieves, and also keep it from vibrating loose while running. The vinyl-clad steel tube slides over the mounting screws and is secured with a hardened brass padlock. Padlock is recessed inside the tube to protect against cutting. Comes with two keys. *Fits: OMC 6-30hp, Merc/Mariner 8-25hp, Yamaha 9. 9-40hp, Suzuki 8-13hp.
Part No: 74049
|
|
|
Engine Systems -> Motor Mounts->Accessories for "Junior" Crane
The St. This removable crane will lift heavy loads with ease. The fixed upper pulley prevents twisted lifting lines while the lower pulley has an integral snap hook for easy attachment to outboards, groceries, sail bags, dive gear, scooters, bicycles or any other type of non-human load. Best of all, it takes just 20 seconds to set up or remove for storage! Upper bracket attaches to a rail or a bulkhead while the lower bracket can be mounted on a deck or vertical surface.
Part No: 196
|
|
|
|
Engine Systems -> Motor Mounts->Accessories for "Junior" Crane
The St. This removable crane will lift heavy loads with ease. The fixed upper pulley prevents twisted lifting lines while the lower pulley has an integral snap hook for easy attachment to outboards, groceries, sail bags, dive gear, scooters, bicycles or any other type of non-human load. Best of all, it takes just 20 seconds to set up or remove for storage! Upper bracket attaches to a rail or a bulkhead while the lower bracket can be mounted on a deck or vertical surface.
Part No: 192
|
|
|
|
Engine Systems -> Motor Mounts->Accessories for "Junior" Crane
The St. This removable crane will lift heavy loads with ease. The fixed upper pulley prevents twisted lifting lines while the lower pulley has an integral snap hook for easy attachment to outboards, groceries, sail bags, dive gear, scooters, bicycles or any other type of non-human load. Best of all, it takes just 20 seconds to set up or remove for storage! Upper bracket attaches to a rail or a bulkhead while the lower bracket can be mounted on a deck or vertical surface.
Part No: 193
|
|
|
|
Engine Systems -> Motor Mounts->Accessories for "Junior" Crane
The St. This removable crane will lift heavy loads with ease. The fixed upper pulley prevents twisted lifting lines while the lower pulley has an integral snap hook for easy attachment to outboards, groceries, sail bags, dive gear, scooters, bicycles or any other type of non-human load. Best of all, it takes just 20 seconds to set up or remove for storage! Upper bracket attaches to a rail or a bulkhead while the lower bracket can be mounted on a deck or vertical surface.
Part No: 198
|
|
|
|
Engine Systems -> Motor Mounts->Accessories for "Junior" Crane
The St. This removable crane will lift heavy loads with ease. The fixed upper pulley prevents twisted lifting lines while the lower pulley has an integral snap hook for easy attachment to outboards, groceries, sail bags, dive gear, scooters, bicycles or any other type of non-human load. Best of all, it takes just 20 seconds to set up or remove for storage! Upper bracket attaches to a rail or a bulkhead while the lower bracket can be mounted on a deck or vertical surface.
Part No: 191
|
|
|
Engine Systems -> Motor Mounts->Accessories for "Little" Crane
The St. This removable crane will lift heavy loads with ease. The fixed upper pulley prevents twisted lifting lines while the lower pulley has an integral snap hook for easy attachment to outboards, groceries, sail bags, dive gear, scooters, bicycles or any other type of non-human load. Best of all, it takes just 20 seconds to set up or remove for storage! Upper bracket attaches to a rail or a bulkhead while the lower bracket can be mounted on a deck or vertical surface.
Part No: 178
|
|
|
|
Engine Systems -> Motor Mounts->Accessories for "Little" Crane
The St. This removable crane will lift heavy loads with ease. The fixed upper pulley prevents twisted lifting lines while the lower pulley has an integral snap hook for easy attachment to outboards, groceries, sail bags, dive gear, scooters, bicycles or any other type of non-human load. Best of all, it takes just 20 seconds to set up or remove for storage! Upper bracket attaches to a rail or a bulkhead while the lower bracket can be mounted on a deck or vertical surface.
Part No: 180
|
|
![Length; 6'-12', Diameter; 1-1/4", Lexan SL-Whisker Pole from FORESPAR](http://images.westmarine.com/thumb/111153_t.jpg "Length; 6'-12', Diameter; 1-1/4", Lexan SL-Whisker Pole from FORESPAR")
