Top Sellers
Twin Straight Handle Control, Chrome from TELEFLEX
Stylish low profile flush mount design available in several function and style options. For single or dual station applications with single or twin engines. Single function (each lever controls shift or throttle). Suits 33C type cables.
|
Aluminum Transom Support Master Mounting Kit from TELEFLEX
Universal mount for most outboard engine steering applications. This kit includes the Teleflex Outboard Clamp Block, Support Tube, and the Clevis Kit.
|
Repl. Cylinder - Repl. Hynautic Model K2 from TELEFLEX
Hydraulic Cylinders -- the same quality steering components that comprise the many Hynautic systems may also be ordered independently for both new or retrofit applications.
|
|
|
Speedometer Kit 80mph, 20-80mph, Includes pitot, 20' tubing, Dia, 3.78", Mounting Hole Max/Min, 3.41"/3.44", D 2.7" from TELEFLEX
White dial, black numerals, black pointer with fire-orange tip. Scratch-resistant curved glass lenses with polished stainless steel, near flush bezels. U. S. and metric scales with ISO symbols .
|
SeaStar Helm Seal Kit from TELEFLEX
Replacement shaft seal kit HS5176 fits various post-1990 SeaStar 1. 4, 1. 7 (I), 2. 0, 2. 4 (II), SeaStar Pro and SeaStar helms.
|
BayStar Helm Seal Kits from TELEFLEX
Replacement front seal kits for both front and rear mount helms. HS5147 fits BayStar front mount and SportTilt helms . Contains 3 screws, shaft seal and o-ring seal.
|
Tach Diesel Mag. P.U. 4000 rpm from TELEFLEX
A popular choice for gas and diesel inboard engines, White Premier instruments feature white dials with modern black and blue graphics and superior light pipe illumination. When illuminated, black dial grads and pointer become red. Fog-resistant design for enhanced readability.
|
|
|
33C Red Jacket Cable, 18' from TELEFLEX
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
|
SeaStar Filler Kit from TELEFLEX
SeaStar hydraulic steering systems require the use of a special high-quality hydraulic fluid meeting MIL SPEC H-5606 C.
|
Fuel Sending Unit Only - 4-24'' Tank from TELEFLEX
Complete kit includes a reliable dash-mount gauge with a black face and white numerals. The triple patented sending unit has an adjustable float arm and U-channel that fits virtually all tanks from 4"-24" deep. Compatible with 12V DC systems with common or insulated ground.
|
Side-Mount with Trim & Tilt 4-Wire from TELEFLEX
SL-3 is specifically engineered for installation without control modifications. Port or starboard installation with various cable-entry angles. Adapts for push or pull mode without tools. “Easy-On” cable design means no shift or throttle adjustments. Optional trim switch in handle grip for one-hand operation. Functions: Gearshift/throttle . Levers: Dual functions—each lever controls throttle and shift . Lever Material: Metal . Features: Push button for neutral Adjustable brake .
|
4300BC TFX Cable - 20' from TELEFLEX
TfXtreme's unique design assures smoothness and efficiency–with hardly any lost motion–even in the longest and most complex cable routings! This means superior feel at the control, in any boat–performance that had been considered "impossible". TfXtreme achieves the "impossible". Patent-pending splined core to achieves the impossible–easy movement and minimum lost motion.
|
|
|
|
Chrome from TELEFLEX, SS from TELEFLEX, from QUICKSILVER
|
|
Home -> Engine Systems -> Steering Systems -> Wheels And Steering Acc.->Electrosteer T4
Imagine being able to steer your boat—from anywhere aboard— at the push of a button. Well, now you can with the Electrosteer T4. This amazing electronic remote steering device attaches directly to your transom with no holes to drill in your boat. Stainless steel drive rod and steering rod communicate via 24' quick-disconnect cables to the remote control panel. It's so easy! . For an even simpler configuration, upgrade to the Wireless Remote option and control your Electrosteer cablefree.
Part No: 55-0103
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Wheels And Steering Acc.->Steering Lubrication Systems
Two unique lubrication products which help prevent steering problems and cable wear. Cable Buddy lubricates the steering cable, and includes a stainless steel nut with plug and sealing washer, oil tube assembly, and a 3-oz. bottle of Max Lube cable lubricant. Lube II seals and lubricates the steering rod, and includes a stainless nut with a plug and zerk fitting. Uses several types of lubricant, such as 90W gear lube or lithium grease (sold separately).
Part No: 425
|
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Wheels And Steering Acc.->Steering Lubrication Systems
Two unique lubrication products which help prevent steering problems and cable wear. Cable Buddy lubricates the steering cable, and includes a stainless steel nut with plug and sealing washer, oil tube assembly, and a 3-oz. bottle of Max Lube cable lubricant. Lube II seals and lubricates the steering rod, and includes a stainless nut with a plug and zerk fitting. Uses several types of lubricant, such as 90W gear lube or lithium grease (sold separately).
Part No: 420
|
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Wheels And Steering Acc.->Steering Lubrication Systems
Two unique lubrication products which help prevent steering problems and cable wear. Cable Buddy lubricates the steering cable, and includes a stainless steel nut with plug and sealing washer, oil tube assembly, and a 3-oz. bottle of Max Lube cable lubricant. Lube II seals and lubricates the steering rod, and includes a stainless nut with a plug and zerk fitting. Uses several types of lubricant, such as 90W gear lube or lithium grease (sold separately).
Part No: 422
|
|
|
|
Home -> Engine Systems -> Steering Systems->Auxiliary Steering Kits for Trolling Motors - Zinc Rod
Steer your trolling motor with your boat's main steering wheel. These connector rods attach the trolling motor directly to the main engine—when the big one moves, the little one moves along with it. Kits come complete with two quick disconnect ball joint assemblies which make taking it off when you don't need it easy. Connect rod length is 24", cut it to size for a perfect fit. Use the drive bracket for motors that have SeaStar or Teleflex steering.
Part No: 55-2600
|
|
|
|
Home -> Engine Systems -> Steering Systems->Back Mount Rack Helm & Bezel Kit
Single helm replaces 1984 to date Teleflex “The Rack” steering helm without dash modification. For use in almost all sterndrive, inboard and other power-assisted applications where No Feedback steering is not required. Back mount design allows fast and easy installation in dash. Four turns lock-to-lock, standard 3/4" tapered steering shaft. Requires bezel kit, sold separately. Boat Type: Inboards and power-assisted sterndrives . Steering Type: Rack and pinion . Turns Lock-to-Lock: 4 .
Part No: SH5210P
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->Back Mount Rack Helm & Bezel Kit
Single helm replaces 1984 to date Teleflex “The Rack” steering helm without dash modification. For use in almost all sterndrive, inboard and other power-assisted applications where No Feedback steering is not required. Back mount design allows fast and easy installation in dash. Four turns lock-to-lock, standard 3/4" tapered steering shaft. Requires bezel kit, sold separately. Boat Type: Inboards and power-assisted sterndrives . Steering Type: Rack and pinion . Turns Lock-to-Lock: 4 .
Part No: SB39526P
|
|
|
|
Home -> Engine Systems -> Steering Systems->Big-T Rotary Helm & Big-T Bezel Kits
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
Part No: SH5000P
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->Big-T Rotary Helm & Big-T Bezel Kits
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
Part No: SB27268P
|
|
|
|
Home -> Engine Systems -> Steering Systems->Clamp Blocks
Used as a standoff from the transom (outboards without tilt tubes) or a stringer (inboard model) for the steering cable.
Part No: SA27578P
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->Clamp Blocks
Used as a standoff from the transom (outboards without tilt tubes) or a stringer (inboard model) for the steering cable.
Part No: SA27579P
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->Clamp Blocks
Used as a standoff from the transom (outboards without tilt tubes) or a stringer (inboard model) for the steering cable.
Part No: SA27149P
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->Clamp Blocks
Used as a standoff from the transom (outboards without tilt tubes) or a stringer (inboard model) for the steering cable.
Part No: SA27055P
|
|
|
|
Home -> Engine Systems -> Steering Systems->Destroyer w/ Control Knob
Finger grips and a handy control knob make this wheel a pleasure to steer with. Rim is supported by five spokes that lead to a stainless-steel center cap. .
Part No: WM1731521FGK
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->Destroyer w/ Control Knob
Finger grips and a handy control knob make this wheel a pleasure to steer with. Rim is supported by five spokes that lead to a stainless-steel center cap. .
Part No: WM1731321FGK
|
|
|
|
Home -> Engine Systems -> Steering Systems->Extension Handles
The HelmsMate is designed with a lock-button mechanism that allows you to extend the handle from 36"–53", so you can sit forward of the motor for better balance, without having to lean back and suffer any loss of control. Constructed of lightweight, corrosion-free aluminum. Swivel model also features a lockout sleeve that slides over the U-joint to convert it back to a conventional straight handle. The handle is easy to attach with a quick-disconnect thumbscrew.
Part No: 001.1
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->Extension Handles
The HelmsMate is designed with a lock-button mechanism that allows you to extend the handle from 36"–53", so you can sit forward of the motor for better balance, without having to lean back and suffer any loss of control. Constructed of lightweight, corrosion-free aluminum. Swivel model also features a lockout sleeve that slides over the U-joint to convert it back to a conventional straight handle. The handle is easy to attach with a quick-disconnect thumbscrew.
Part No: 001.0
|
|
|
|
Home -> Engine Systems -> Steering Systems->Heavy-Duty Helm Assemblies
These helms combine one or two bi-directional axial piston pumps with pilot check and make-up check valving. The result is a unit that prevents rudder feedback, is very efficient (even at low rpm) and is immediately adaptable to multi-station use.
Part No: H-21
|
|
|
|
Home -> Engine Systems -> Steering Systems->No Feedback Rack System
This rack and pinion system delivers precision control using patented No Feedback technology. Ideal for boats with single, nonpower-assisted outboards. Fits standard rack and pinion dash cutout. Includes NFB rack helm, 90° bezel, kit and cable. Steering wheel and link-arm kits sold separately. Boat Type: Boats with V-6 outboards and smaller. Single station only . Steering Type: Rack and Pinion . Turns Lock-to-Lock: 4 . Dimensions: 8-5/16"D from dash front x 28-1/2"W .
Part No: SS15114
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->No Feedback Rack System
This rack and pinion system delivers precision control using patented No Feedback technology. Ideal for boats with single, nonpower-assisted outboards. Fits standard rack and pinion dash cutout. Includes NFB rack helm, 90° bezel, kit and cable. Steering wheel and link-arm kits sold separately. Boat Type: Boats with V-6 outboards and smaller. Single station only . Steering Type: Rack and Pinion . Turns Lock-to-Lock: 4 . Dimensions: 8-5/16"D from dash front x 28-1/2"W .
Part No: SS15118
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->No Feedback Rack System
This rack and pinion system delivers precision control using patented No Feedback technology. Ideal for boats with single, nonpower-assisted outboards. Fits standard rack and pinion dash cutout. Includes NFB rack helm, 90° bezel, kit and cable. Steering wheel and link-arm kits sold separately. Boat Type: Boats with V-6 outboards and smaller. Single station only . Steering Type: Rack and Pinion . Turns Lock-to-Lock: 4 . Dimensions: 8-5/16"D from dash front x 28-1/2"W .
Part No: SS15115
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->No Feedback Rack System
This rack and pinion system delivers precision control using patented No Feedback technology. Ideal for boats with single, nonpower-assisted outboards. Fits standard rack and pinion dash cutout. Includes NFB rack helm, 90° bezel, kit and cable. Steering wheel and link-arm kits sold separately. Boat Type: Boats with V-6 outboards and smaller. Single station only . Steering Type: Rack and Pinion . Turns Lock-to-Lock: 4 . Dimensions: 8-5/16"D from dash front x 28-1/2"W .
Part No: SS15116
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->No Feedback Rack System
This rack and pinion system delivers precision control using patented No Feedback technology. Ideal for boats with single, nonpower-assisted outboards. Fits standard rack and pinion dash cutout. Includes NFB rack helm, 90° bezel, kit and cable. Steering wheel and link-arm kits sold separately. Boat Type: Boats with V-6 outboards and smaller. Single station only . Steering Type: Rack and Pinion . Turns Lock-to-Lock: 4 . Dimensions: 8-5/16"D from dash front x 28-1/2"W .
Part No: SS15113
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->No Feedback Rack System
This rack and pinion system delivers precision control using patented No Feedback technology. Ideal for boats with single, nonpower-assisted outboards. Fits standard rack and pinion dash cutout. Includes NFB rack helm, 90° bezel, kit and cable. Steering wheel and link-arm kits sold separately. Boat Type: Boats with V-6 outboards and smaller. Single station only . Steering Type: Rack and Pinion . Turns Lock-to-Lock: 4 . Dimensions: 8-5/16"D from dash front x 28-1/2"W .
Part No: SS15120
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->No Feedback Rack System
This rack and pinion system delivers precision control using patented No Feedback technology. Ideal for boats with single, nonpower-assisted outboards. Fits standard rack and pinion dash cutout. Includes NFB rack helm, 90° bezel, kit and cable. Steering wheel and link-arm kits sold separately. Boat Type: Boats with V-6 outboards and smaller. Single station only . Steering Type: Rack and Pinion . Turns Lock-to-Lock: 4 . Dimensions: 8-5/16"D from dash front x 28-1/2"W .
Part No: SS15117
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->No Feedback Rack System
This rack and pinion system delivers precision control using patented No Feedback technology. Ideal for boats with single, nonpower-assisted outboards. Fits standard rack and pinion dash cutout. Includes NFB rack helm, 90° bezel, kit and cable. Steering wheel and link-arm kits sold separately. Boat Type: Boats with V-6 outboards and smaller. Single station only . Steering Type: Rack and Pinion . Turns Lock-to-Lock: 4 . Dimensions: 8-5/16"D from dash front x 28-1/2"W .
Part No: SS15119
|
|
|
|
Home -> Engine Systems -> Steering Systems->Power Trim & Steering Fluid
A universal hydraulic fluid designed to mix with all hydraulic fluids, protect seals and hoses, and prevent foaming, oxidation and corrosion.
Part No: 858075Q01
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->Power Trim & Steering Fluid
A universal hydraulic fluid designed to mix with all hydraulic fluids, protect seals and hoses, and prevent foaming, oxidation and corrosion.
Part No: 858074Q01
|
|
|
|
Home -> Engine Systems -> Steering Systems->QC II Steering Cables
Single station cable assembly, push/pull action. Direct replacement for SSC62 and SSC72 cables. Fits old style (i. e. , threaded) Safe-T, Big-T, Safe-T Quick Connect and NFB Rotary helms.
Part No: SSC6107
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->QC II Steering Cables
Single station cable assembly, push/pull action. Direct replacement for SSC62 and SSC72 cables. Fits old style (i. e. , threaded) Safe-T, Big-T, Safe-T Quick Connect and NFB Rotary helms.
Part No: SSC6117
|
|
|
