Top Sellers
|
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
|
|
Scotch General Painting Masking Tape #2050 - 2" from 3M PRODUCTS
Use in a wide range of painting applicationsGeneral-purpose. Not for critical or extended outdoor use. Recommended Usage: General purpose masking or binding tape; adheres to previously painted or varnished surfaces . Material: Crepe paper with rubber resin adhesive . Removal Time: Three days .
|
|
|
Noise Reduction Seam Tape from WEST MARINE
The 3/32" flexible vinyl sheet is fused between two layers of foam—an exterior (“decoupler”) layer and an interior (“absorber”) layer. The exterior layer is then covered with a thin film (2. 5 mil) of mylar, reinforced with elastomer-coated fiberglass, for surface heat protection and enhanced sound absorption. The overall effect is a dramatic noise reduction when compared with single-layer foam barriers. Available in two overall thicknesses. Peel and stick backing for easy installation.
|
Electric Bilge Pump Installation Kit from ANCOR MARINE
Essential items for installing a bilge pump Convenient package includes four #8 x 3/4" stainless-steel panhead screws, one 1-3/4" x 3/4" stainless steel hose clamp, and three 16-14AWG heat shrink butt connectors.
|
|
|
Electric Head Conversion Kit from JABSCO
Fits Raritan PH or Compact, Wilcox Crittenden Head Mate, Groco HC, Sealand 750 Series, or PAR 29090/29120 Series and virtually any other marine toilet using 3-3/4" diameter bolt circle with a four-hole with a four-hole bowl-base pattern. High Capacity Macerator and Bowl Scavenger Pump . Also converts most toilets with a 4 bolt screw pattern on a 3 3/4" (95mm) diameter bolt circle such as Groco, Raritan, Wilcox Crittenden, Mansfield and Sealand. Flexible Impeller Flush Pump .
|
Steering Wheel, Black w/ Burlwood Inserts from SCHMITT MARINE STEER
Classic Italian styling at an affordable price. Our Folletto wheels feature modern styling that will enhance the look of any power boat. These wheels feature aluminum spoke with polyurethane grips. The 3/4" tapered hub fits most steering systems. Black aluminum spoke. Black polyurethane grip. Burlwood inserts. 13-3/4" Diameter.
|
Stainless-Steel Compact Electric Horn - Double from AFI
Mini Twin Electric Horn Excellent for use in the marine environment. totally seal sound units have type 304 stainless cover, diaphragm and mounting brackets. Material: 304 stainless cover & horn diaphragm. Loudness dB: 106 dB. Approvals: ABYC for boats up to 20 meters. Dimensions: 3"L x 8"W x 1 3/4"H. Power Requirements: 12V. Draw: 3A @ 12V (max. 6A). Fundamental frequency: 490±20/440±20.
|
Whale Gulper 220 Pump, 12V DC, Draw: 2.4A from WHALE PUMPS
Use this 3. Large 3/4" inlet and outlet valves are cut at 45° angles to minimize flow restriction. Ports rotate to the position you need to facilitate hose connections and it mounts vertically or horizontally—making installation a snap! It can run dry for extended periods without burnout and boasts a large diaphragm that generates up to 13' of lift. Rubber mounting feet reduce noise. Features: Will run dry without damage and pump a mixture of air and water . Large single diaphragm .
|
Quiet Flush Electric Head, Compact Size Bowl, 12V from JABSCO
The Quiet Flush head features a very quiet flush cycle just like your household toilet. Incorporates a powerful waste water evacuation pump with built-in macerator. Select normal flush or bowl-fill/bowl-empty flush. Water control solenoid valve with anti-siphon breaker to prevent contamination of potable water supply. Includes 6' hose for connecting to the remote mounted solenoid valve and a siphon-breaker assembly. Port Sizes: 3/4" Hose Barb intake, 1" Hose Barb discharge.
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
|
|
|
8'' from WEST MARINE, SWL from WEST MARINE, ''3, 4'' from WEST MARINE
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Chain->Proof Coil Anchor Chain
Bulk Chain We stock a complete selection of I. S. O. All Acco chain is hot-dip galvanized, which is superior to the zinc electroplating used by most other major U. chain vendors. ” Remember that the Safe Working Load (SWL) is a conservative rating for safety and should not be exceeded, although the breaking strength is generally 3–4 times greater. Proof Coil (PC) is made of low-carbon steel and designed for ordinary marine applications, but not for use in most windlasses due to its long links.
Part No: 4001-41232
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Chain->Proof Coil Anchor Chain
Bulk Chain We stock a complete selection of I. S. O. All Acco chain is hot-dip galvanized, which is superior to the zinc electroplating used by most other major U. chain vendors. ” Remember that the Safe Working Load (SWL) is a conservative rating for safety and should not be exceeded, although the breaking strength is generally 3–4 times greater. Proof Coil (PC) is made of low-carbon steel and designed for ordinary marine applications, but not for use in most windlasses due to its long links.
Part No: 4001-41032
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Chain->Proof Coil Anchor Chain
Bulk Chain We stock a complete selection of I. S. O. All Acco chain is hot-dip galvanized, which is superior to the zinc electroplating used by most other major U. chain vendors. ” Remember that the Safe Working Load (SWL) is a conservative rating for safety and should not be exceeded, although the breaking strength is generally 3–4 times greater. Proof Coil (PC) is made of low-carbon steel and designed for ordinary marine applications, but not for use in most windlasses due to its long links.
Part No: 5311165
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Chain->Proof Coil Anchor Chain
Bulk Chain We stock a complete selection of I. S. O. All Acco chain is hot-dip galvanized, which is superior to the zinc electroplating used by most other major U. chain vendors. ” Remember that the Safe Working Load (SWL) is a conservative rating for safety and should not be exceeded, although the breaking strength is generally 3–4 times greater. Proof Coil (PC) is made of low-carbon steel and designed for ordinary marine applications, but not for use in most windlasses due to its long links.
Part No: 4001-40432
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Chain->Stainless-Steel–Proof Coil Chain
316 stainless steel chain has a bright, shiny finish and extraordinary corrosion resistance. It's stronger than low-carbon steel (Proof Coil and BBB) for a given size, but not as strong as High Test.
Part No: S0602-0007
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Chain->Stainless-Steel–Proof Coil Chain
.
Part No: S0602-0008
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Chain->Stainless-Steel–Proof Coil Chain
.
Part No: S0602-0010
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware
Perfect for attachment to a bow eye or sand spike, this combo carabiner/ cam cleat eliminates the periodic hassle of correcting and retying your beach or anchor line. Just pass the line through the cam cleat and pull tight. Made of 304 stainless steel. For boats to 6,000lb. that anchor in protected waters. For use with 3/8"-5/8" line, sold separately. Holds up to 8,000lb.
Part No: DH
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware
For greater strength, use one size larger than your chain. Made of 316 stainless steel for maximum corrosion protection. Oversize screw pin adds security to your anchor connections, and can be wired to prevent accidental opening. Mfr. 's lifetime limited warranty. Ship 0.
Part No: C0116-FS13
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware
Double-end jaw and jaw swivel keeps bow and anchor aligned. Includes stainless-steel locking rings to prevent loosening of shackle pins. Handles 1/4" and 5/16" High Test (matches the load limit of 5/16" HT) and 3/8" BBB chain. Maintenance-free, non-corroding galvanized construction. 1500lb.
Part No: 440640011
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Acco Connecting Links
As strong as similar-sized proof coil chain when rivets are peened into countersunk holes.
Part No: 4408-40503
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Anchor Connectors
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
Part No: 444.08
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Chain Hooks
Used to grab a link of chain, so the load can be taken up on a length of nylon line. This takes the load off the windlass and provides some shock absorption as the boat moves in waves.
Part No: 440242442
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Chain Hooks
Used to grab a link of chain, so the load can be taken up on a length of nylon line. This takes the load off the windlass and provides some shock absorption as the boat moves in waves.
Part No: 440242445
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Chain Hooks
Used to grab a link of chain, so the load can be taken up on a length of nylon line. This takes the load off the windlass and provides some shock absorption as the boat moves in waves.
Part No: 440242443
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Double Clevis Link
Double clevis links are drop forged, heat treated and tempered.
Part No: 8057430
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Double Clevis Link
Double clevis links are drop forged, heat treated and tempered.
Part No: 8057230
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Galv Jaw And Eye Swivels
Galvanized drop forged steel with Monel cotter pin.
Part No: SWVLJE1/2CWM
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Galv Jaw And Eye Swivels
Galvanized drop forged steel with Monel cotter pin.
Part No: SWVLJE3/8CWM
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Galv Jaw And Eye Swivels
Galvanized drop forged steel with Monel cotter pin.
Part No: SWVLJE3/4CWM
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Galv Jaw And Eye Swivels
Galvanized drop forged steel with Monel cotter pin.
Part No: SWVLJE5/16CWM
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Galv Jaw And Eye Swivels
Galvanized drop forged steel with Monel cotter pin.
Part No: SWVLJE1/4CWM
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Galv Jaw And Eye Swivels
Galvanized drop forged steel with Monel cotter pin.
Part No: SWVLJE5/8CWM
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Galvanized Steel Screw Pin Anchor Shackles
Roughly the same strength as proof coil chain of the same size. To prevent accidental opening, always seize the shackle pin with safety wire. For increased strength, use one size larger than the chain, especially with High-Test chain (the pins will still fit). Meet Fed. Spec. RR-C-271b Type IV Class 1.
Part No: 6588S
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Galvanized Steel Screw Pin Anchor Shackles
Roughly the same strength as proof coil chain of the same size. To prevent accidental opening, always seize the shackle pin with safety wire. For increased strength, use one size larger than the chain, especially with High-Test chain (the pins will still fit). Meet Fed. Spec. RR-C-271b Type IV Class 1.
Part No: 6591S
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Galvanized Steel Screw Pin Anchor Shackles
Roughly the same strength as proof coil chain of the same size. To prevent accidental opening, always seize the shackle pin with safety wire. For increased strength, use one size larger than the chain, especially with High-Test chain (the pins will still fit). Meet Fed. Spec. RR-C-271b Type IV Class 1.
Part No: 6589S
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Galvanized Steel Screw Pin Anchor Shackles
Roughly the same strength as proof coil chain of the same size. To prevent accidental opening, always seize the shackle pin with safety wire. For increased strength, use one size larger than the chain, especially with High-Test chain (the pins will still fit). Meet Fed. Spec. RR-C-271b Type IV Class 1.
Part No: 6587S
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Galvanized Steel Screw Pin Anchor Shackles
Roughly the same strength as proof coil chain of the same size. To prevent accidental opening, always seize the shackle pin with safety wire. For increased strength, use one size larger than the chain, especially with High-Test chain (the pins will still fit). Meet Fed. Spec. RR-C-271b Type IV Class 1.
Part No: 6592S
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Galvanized Steel Screw Pin Anchor Shackles
Roughly the same strength as proof coil chain of the same size. To prevent accidental opening, always seize the shackle pin with safety wire. For increased strength, use one size larger than the chain, especially with High-Test chain (the pins will still fit). Meet Fed. Spec. RR-C-271b Type IV Class 1.
Part No: 6593S
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Galvanized Thimbles
West Marine Galvanized Thimbles offered in various sizes.
Part No: THSTD3/8CWM
|
|
|
